[PATCH v3 00/20] ARM: mvebu: Armada 39x basic support, and preparatory cleanups

[PATCH v3 00/20] ARM: mvebu: Armada 39x basic support, and preparatory cleanups

[Thomas Petazzoni]

Hello,

This is the third version of the patch series adding Armada 39x basic
support.

This set of patches add basic support for a new family of Marvell EBU
processors: the Armada 39x. They are based on Cortex-A9 (like Armada
375 and 38x) and the most important new feature is probably the
addition of 10 GbE support.

See http://www.marvell.com/embedded-processors/armada-39x/ for a basic
introduction.

Note that this web page talks about an Armada 395 and Armada 398, but
so far the technical documentation we have been given access to only
describes Armada 390 and Armada 398, so this series supports only
Armada 390 and Armada 398 so far. Support for Armada 395 might be
added in the future, once we get access to the appropriate technical
details.

Changes v2 -> v3:

 - Rebased on top of v4.0-rc1

 - Add support for the L2 cache

 - Added Acked-by from Gregory Clement on

   ARM: mvebu: add __initconst specifiers on DT_MACHINE_START dt_compat tables
   ARM: mvebu: fix usb@ unit address on Armada 38x to match register address
   ARM: mvebu: add missing UART alias on Armada 38x
   devicetree: bindings: add DT binding for the Marvell Armada 39x SoC family

 - Renamed 'ARM: mvebu: add missing UART alias on Armada 38x' to 'ARM:
   mvebu: add missing UART labels on Armada 38x'.

 - Added a patch 'ARM: mvebu: add UART labels to Armada 375'.

 - Change 'ARM: mvebu: add stdout-path to all armada-*.dts' to go
   further and eliminate completely /chosen/bootargs. This removes the
   non-desired 'earlyprintk' argument, and since console= was the only
   remaining kernel parameter, using stdout-path makes more
   sense. Requested by Rob Herring and Mark Rutland.

 - Dropped the patch "ARM: mvebu: use IRQ macros to define the SDHCI
   interrupt on Armada 38x" from the series, since Gregory Clement
   already submitted it as part of a different series.

 - Added patches 'ARM: mvebu: enable Armada 39x in mvebu_v7_defconfig'
   and 'ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig'
   to update mvebu_v7_defconfig and multi_v7_defconfig so that they
   enable Marvell Armada 39x by default. Suggested by Gregory Clement.

 - Fix the unit address of the MPIC interrupt controller, in both the
   newly added Armada 39x support, as well as in the existing Armada
   370, 375, 38x and XP support. Suggested by Gregory Clement.

Changes v1 -> v2:

 - At the SoC level, add the description of SPI controller 0 and 1,
   NAND flash controller, SDHCI controller, Core Divider Clock (needed
   by the NAND flash controller), the main PLL clock (needed by the
   Core Divider Clock) and the XOR engines.

 - At the board level, add the description of the SPI flash connected
   to SPI bus 1, which contains the bootloader, and the description of
   the NAND flash.

 - Fix space vs. tab.

 - Use __initconst when defining the dt_compat table for Armada
   39x. Suggested by Stephen Boyd.

 - Fix typo in commit log of "ARM: mvebu: add core support for Armada
   39x", noticed by Maxime Ripard.

 - Remove earlyprintk from /chosen/bootargs. Suggested by Andrew Lunn.

 - Add aliases for uart[0-3]. Suggested by Andrew Lunn.

 - Add /chosen/stdout-path to Armada 398 DB DT. Suggested by Andrew
   Lunn.

 - Move pinctrl configurations at the SoC level. Suggested by Andrew
   Lunn.

 - Add several preparation/cleanup patches not related to Armada 39x
   directly, but whose topics were found while working on Armada 39x
   support:

     - Add __initconst to all dt_compat table in mach-mvebu.
     - Fixup usb@ unit address on Armada 38x
     - Add stdout-path to all armada-*.dts
     - Use GIC and IRQ macros in SDHCI definition of Armada 38x
     - Add missing UART alias on Armada 38x

Thanks!

Thomas

Thomas Petazzoni (20):
  ARM: mvebu: add __initconst specifiers on DT_MACHINE_START dt_compat
    tables
  ARM: mvebu: fix usb@ unit address on Armada 38x to match register
    address
  ARM: mvebu: add missing UART labels on Armada 38x
  ARM: mvebu: add UART labels to Armada 375
  ARM: mvebu: remove aliases for Ethernet devices on Armada
    370/375/38x/XP
  ARM: mvebu: add serial port aliases on Armada 370/375/38x/XP
  ARM: mvebu: use stdout-path in all armada-*.dts
  ARM: mvebu: fix unit address of MPIC nodes
  devicetree: bindings: add DT binding for the Marvell Armada 39x SoC
    family
  devicetree: bindings: update DT bindings for Marvell EBU clock support
  devicetree: bindings: add Device Tree bindings for Armada 39x
    pin-muxing controller
  devicetree: bindings: add new SMP enable method for Marvell Armada 39x
  clk: mvebu: extend common code to allow an optional refclk
  clk: mvebu: add Marvell Armada 39x driver
  pinctrl: mvebu: add pinctrl driver for Marvell Armada 39x
  ARM: mvebu: add core support for Armada 39x
  ARM: mvebu: add Device Tree files for Armada 39x SoC and board
  Documentation: arm: update supported Marvell EBU processors
  ARM: mvebu: enable Armada 39x in mvebu_v7_defconfig
  ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig

 Documentation/arm/Marvell/README                   |   5 +
 .../devicetree/bindings/arm/armada-39x.txt         |  20 +
 Documentation/devicetree/bindings/arm/cpus.txt     |   1 +
 .../devicetree/bindings/clock/mvebu-core-clock.txt |   9 +
 .../bindings/clock/mvebu-gated-clock.txt           |  15 +-
 .../pinctrl/marvell,armada-39x-pinctrl.txt         |  78 ++++
 arch/arm/boot/dts/Makefile                         |   2 +
 arch/arm/boot/dts/armada-370-db.dts                |   2 +-
 arch/arm/boot/dts/armada-370-mirabox.dts           |   2 +-
 arch/arm/boot/dts/armada-370-netgear-rn102.dts     |   2 +-
 arch/arm/boot/dts/armada-370-netgear-rn104.dts     |   2 +-
 arch/arm/boot/dts/armada-370-rd.dts                |   2 +-
 arch/arm/boot/dts/armada-370-synology-ds213j.dts   |   3 +-
 arch/arm/boot/dts/armada-370-xp.dtsi               |   6 +-
 arch/arm/boot/dts/armada-370.dtsi                  |   2 +-
 arch/arm/boot/dts/armada-375-db.dts                |   2 +-
 arch/arm/boot/dts/armada-375.dtsi                  |  10 +-
 arch/arm/boot/dts/armada-385-db-ap.dts             |   3 +-
 arch/arm/boot/dts/armada-388-db.dts                |   4 +-
 arch/arm/boot/dts/armada-388-gp.dts                |   5 +-
 arch/arm/boot/dts/armada-388-rd.dts                |   2 +-
 arch/arm/boot/dts/armada-38x.dtsi                  |  11 +-
 .../dts/{armada-xp-matrix.dts => armada-390.dtsi}  |  71 +---
 .../dts/{armada-388-db.dts => armada-398-db.dts}   | 111 ++---
 .../dts/{armada-xp-matrix.dts => armada-398.dtsi}  |  70 +---
 .../boot/dts/{armada-375.dtsi => armada-39x.dtsi}  | 446 ++++++++-------------
 arch/arm/boot/dts/armada-xp-axpwifiap.dts          |   2 +-
 arch/arm/boot/dts/armada-xp-db.dts                 |   2 +-
 arch/arm/boot/dts/armada-xp-gp.dts                 |   2 +-
 arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts    |   3 +-
 arch/arm/boot/dts/armada-xp-matrix.dts             |   2 +-
 arch/arm/boot/dts/armada-xp-mv78260.dtsi           |   1 -
 arch/arm/boot/dts/armada-xp-mv78460.dtsi           |   1 -
 arch/arm/boot/dts/armada-xp-netgear-rn2120.dts     |   2 +-
 arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts   |   2 +-
 arch/arm/boot/dts/armada-xp-synology-ds414.dts     |   3 +-
 arch/arm/boot/dts/armada-xp.dtsi                   |   5 +-
 arch/arm/configs/multi_v7_defconfig                |   1 +
 arch/arm/configs/mvebu_v7_defconfig                |   1 +
 arch/arm/mach-mvebu/Kconfig                        |  14 +
 arch/arm/mach-mvebu/board-v7.c                     |  20 +-
 arch/arm/mach-mvebu/dove.c                         |   2 +-
 arch/arm/mach-mvebu/kirkwood.c                     |   2 +-
 arch/arm/mach-mvebu/platsmp-a9.c                   |   2 +
 drivers/clk/mvebu/Kconfig                          |   4 +
 drivers/clk/mvebu/Makefile                         |   1 +
 drivers/clk/mvebu/armada-39x.c                     | 156 +++++++
 drivers/clk/mvebu/common.c                         |  17 +
 drivers/clk/mvebu/common.h                         |   1 +
 drivers/pinctrl/mvebu/Kconfig                      |   4 +
 drivers/pinctrl/mvebu/Makefile                     |   1 +
 drivers/pinctrl/mvebu/pinctrl-armada-39x.c         | 432 ++++++++++++++++++++
 52 files changed, 1045 insertions(+), 524 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/armada-39x.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt
 copy arch/arm/boot/dts/{armada-xp-matrix.dts => armada-390.dtsi} (61%)
 copy arch/arm/boot/dts/{armada-388-db.dts => armada-398-db.dts} (70%)
 copy arch/arm/boot/dts/{armada-xp-matrix.dts => armada-398.dtsi} (61%)
 copy arch/arm/boot/dts/{armada-375.dtsi => armada-39x.dtsi} (55%)
 create mode 100644 drivers/clk/mvebu/armada-39x.c
 create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-39x.c

-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 01/20] ARM: mvebu: add __initconst specifiers on DT_MACHINE_START dt_compat tables

[Thomas Petazzoni]

As suggested by Stephen Boyd, this commit adds the __initconst
specifier to the dt_compat table declarations used by the
DT_MACHINE_START structures in mach-mvebu land.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Acked-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 arch/arm/mach-mvebu/board-v7.c | 6 +++---
 arch/arm/mach-mvebu/dove.c     | 2 +-
 arch/arm/mach-mvebu/kirkwood.c | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index 89a139e..31b66f2 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -184,7 +184,7 @@ static void __init mvebu_dt_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static const char * const armada_370_xp_dt_compat[] = {
+static const char * const armada_370_xp_dt_compat[] __initconst = {
 	"marvell,armada-370-xp",
 	NULL,
 };
@@ -205,7 +205,7 @@ DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)")
 	.dt_compat	= armada_370_xp_dt_compat,
 MACHINE_END
 
-static const char * const armada_375_dt_compat[] = {
+static const char * const armada_375_dt_compat[] __initconst = {
 	"marvell,armada375",
 	NULL,
 };
@@ -219,7 +219,7 @@ DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)")
 	.dt_compat	= armada_375_dt_compat,
 MACHINE_END
 
-static const char * const armada_38x_dt_compat[] = {
+static const char * const armada_38x_dt_compat[] __initconst = {
 	"marvell,armada380",
 	"marvell,armada385",
 	NULL,
diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c
index b50464e..5a17415 100644
--- a/arch/arm/mach-mvebu/dove.c
+++ b/arch/arm/mach-mvebu/dove.c
@@ -27,7 +27,7 @@ static void __init dove_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static const char * const dove_dt_compat[] = {
+static const char * const dove_dt_compat[] __initconst = {
 	"marvell,dove",
 	NULL
 };
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index 6b53108..925f75f 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -186,7 +186,7 @@ static void __init kirkwood_dt_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
 }
 
-static const char * const kirkwood_dt_board_compat[] = {
+static const char * const kirkwood_dt_board_compat[] __initconst = {
 	"marvell,kirkwood",
 	NULL
 };
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 02/20] ARM: mvebu: fix usb@ unit address on Armada 38x to match register address

[Thomas Petazzoni]

On Marvell Armada 38x, the USB2 controller registers are at 0x58000,
so the corresponding Device Tree node should have a unit address of
58000, and not 50000. We were using 50000 due to an incorrect
copy/pastebin of Armada 370/XP code.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 arch/arm/boot/dts/armada-388-db.dts | 2 +-
 arch/arm/boot/dts/armada-388-gp.dts | 2 +-
 arch/arm/boot/dts/armada-38x.dtsi   | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index 16512ef..af6c74e 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -99,7 +99,7 @@
 				phy-mode = "rgmii-id";
 			};
 
-			usb@50000 {
+			usb@58000 {
 				status = "ok";
 			};
 
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index 590b383..3ff0573 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -135,7 +135,7 @@
 			};
 
 			/* CON4 */
-			usb@50000 {
+			usb@58000 {
 				vcc-supply = <&reg_usb2_0_vbus>;
 				status = "okay";
 			};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 1dff30a..c40d717 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -435,7 +435,7 @@
 				status = "disabled";
 			};
 
-			usb@50000 {
+			usb@58000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x58000 0x500>;
 				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.1.0

[PATCH v3 03/20] ARM: mvebu: add missing UART labels on Armada 38x

[Thomas Petazzoni]

The Armada 38x had a label for UART0, but not UART1. This commit fixes
that.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 arch/arm/boot/dts/armada-38x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index c40d717..bb73cc3 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -216,7 +216,7 @@
 				status = "disabled";
 			};
 
-			serial@12100 {
+			uart1: serial@12100 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
-- 
2.1.0

[PATCH v3 04/20] ARM: mvebu: add UART labels to Armada 375

[Thomas Petazzoni]

This commit adds the standard uart0 and uart1 DT labels to the Device
Tree description of the Marvell Armada 375 SoC.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 arch/arm/boot/dts/armada-375.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index ba3c57e..6307e80 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -276,7 +276,7 @@
 				status = "disabled";
 			};
 
-			serial@12000 {
+			uart0: serial@12000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
@@ -286,7 +286,7 @@
 				status = "disabled";
 			};
 
-			serial@12100 {
+			uart1: serial@12100 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 05/20] ARM: mvebu: remove aliases for Ethernet devices on Armada 370/375/38x/XP

[Thomas Petazzoni]

Having aliases for Ethernet devices is useless, since the networking
subsystem unfortunately doesn't care about aliases to name network
interfaces.

Note that the 'aliases' nodes in armada-370-xp.dtsi and armada-xp.dtsi
become empty, but that we keep it as is since a followup patch will
re-add some aliases to it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 arch/arm/boot/dts/armada-370-xp.dtsi     | 2 --
 arch/arm/boot/dts/armada-375.dtsi        | 2 --
 arch/arm/boot/dts/armada-38x.dtsi        | 3 ---
 arch/arm/boot/dts/armada-xp-mv78260.dtsi | 1 -
 arch/arm/boot/dts/armada-xp-mv78460.dtsi | 1 -
 arch/arm/boot/dts/armada-xp.dtsi         | 1 -
 6 files changed, 10 deletions(-)

diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 8a322ad..d36b1e5 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -59,8 +59,6 @@
 	compatible = "marvell,armada-370-xp";
 
 	aliases {
-		eth0 = &eth0;
-		eth1 = &eth1;
 	};
 
 	cpus {
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 6307e80..0d02251 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -60,8 +60,6 @@
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
-		ethernet0 = &eth0;
-		ethernet1 = &eth1;
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index bb73cc3..044e83c 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -59,9 +59,6 @@
 	aliases {
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
-		ethernet0 = &eth0;
-		ethernet1 = &eth1;
-		ethernet2 = &eth2;
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 4a7cbed..8479fdc 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -57,7 +57,6 @@
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
-		eth3 = &eth3;
 	};
 
 	cpus {
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 36ce63a..661d54c 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -57,7 +57,6 @@
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
-		eth3 = &eth3;
 	};
 
 
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 8291723..975ae64 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -57,7 +57,6 @@
 	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
 
 	aliases {
-		eth2 = &eth2;
 	};
 
 	soc {
-- 
2.1.0

[PATCH v3 06/20] ARM: mvebu: add serial port aliases on Armada 370/375/38x/XP

[Thomas Petazzoni]

This commit adds 'serialX' aliases for the various serial ports on
Armada 370, 375, 38x and XP platforms. It will allow the usage of the
stdout-path property.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 arch/arm/boot/dts/armada-370-xp.dtsi | 2 ++
 arch/arm/boot/dts/armada-375.dtsi    | 2 ++
 arch/arm/boot/dts/armada-38x.dtsi    | 2 ++
 arch/arm/boot/dts/armada-xp.dtsi     | 2 ++
 4 files changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index d36b1e5..1058cf6 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -59,6 +59,8 @@
 	compatible = "marvell,armada-370-xp";
 
 	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
 	};
 
 	cpus {
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 0d02251..6420693 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -60,6 +60,8 @@
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
+		serial0 = &uart0;
+		serial1 = &uart1;
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 044e83c..7cf6657 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -59,6 +59,8 @@
 	aliases {
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
+		serial0 = &uart0;
+		serial1 = &uart1;
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 975ae64..bbabee5 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -57,6 +57,8 @@
 	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
 
 	aliases {
+		serial2 = &uart2;
+		serial3 = &uart3;
 	};
 
 	soc {
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 07/20] ARM: mvebu: use stdout-path in all armada-*.dts

[Thomas Petazzoni]

This commit adds the stdout-path property in /chosen for all Armada
boards that were not yet carrying this property, and gets rid of
/chosen/bootargs which becomes unneeded: earlyprintk should not be
used by default, and the console= parameter is replaced by the
/chosen/stdout-path property.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 arch/arm/boot/dts/armada-370-db.dts              | 2 +-
 arch/arm/boot/dts/armada-370-mirabox.dts         | 2 +-
 arch/arm/boot/dts/armada-370-netgear-rn102.dts   | 2 +-
 arch/arm/boot/dts/armada-370-netgear-rn104.dts   | 2 +-
 arch/arm/boot/dts/armada-370-rd.dts              | 2 +-
 arch/arm/boot/dts/armada-370-synology-ds213j.dts | 3 +--
 arch/arm/boot/dts/armada-375-db.dts              | 2 +-
 arch/arm/boot/dts/armada-385-db-ap.dts           | 3 +--
 arch/arm/boot/dts/armada-388-db.dts              | 2 +-
 arch/arm/boot/dts/armada-388-gp.dts              | 3 +--
 arch/arm/boot/dts/armada-388-rd.dts              | 2 +-
 arch/arm/boot/dts/armada-xp-axpwifiap.dts        | 2 +-
 arch/arm/boot/dts/armada-xp-db.dts               | 2 +-
 arch/arm/boot/dts/armada-xp-gp.dts               | 2 +-
 arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts  | 3 +--
 arch/arm/boot/dts/armada-xp-matrix.dts           | 2 +-
 arch/arm/boot/dts/armada-xp-netgear-rn2120.dts   | 2 +-
 arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 2 +-
 arch/arm/boot/dts/armada-xp-synology-ds414.dts   | 3 +--
 19 files changed, 19 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index e993c46..485ecf8 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -55,7 +55,7 @@
 	compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index b10ceb4..0f40d5d 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -51,7 +51,7 @@
 	compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 3f8cc38..a312078 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -53,7 +53,7 @@
 	compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 99eb8a0..00540f2 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -53,7 +53,7 @@
 	compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 6ae36a3..19475e6 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -64,7 +64,7 @@
 	compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index 59f74e6..b42b767 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -67,8 +67,7 @@
 		     "marvell,armada-370-xp";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index 0440891..4eabc9c 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -55,7 +55,7 @@
 	compatible = "marvell,a375-db", "marvell,armada375";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index 57b9119..779119f 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -49,8 +49,7 @@
 	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart1;
+		stdout-path = "serial1:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index af6c74e..51d1623 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -54,7 +54,7 @@
 		"marvell,armada385", "marvell,armada380";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index 3ff0573..78514ab 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -48,8 +48,7 @@
 	compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts
index d99baac..db99cae 100644
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ b/arch/arm/boot/dts/armada-388-rd.dts
@@ -55,7 +55,7 @@
 		"marvell,armada385","marvell,armada380";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index c1fbab2..dfd782b 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -59,7 +59,7 @@
 	compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 48bdafe..1037824 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -64,7 +64,7 @@
 	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 206aebb..565227e 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -65,7 +65,7 @@
 	compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index 5fb3c8b..06a6a6c 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -54,8 +54,7 @@
 		     "marvell,armadaxp", "marvell,armada-370-xp";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
index 56f958e..f894bc8 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -52,7 +52,7 @@
 	compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 99cb9a8..1516fc2 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -53,7 +53,7 @@
 	compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 0c76d9f..e3b08fb 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -54,7 +54,7 @@
 	compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index e9fb225..6063428 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -67,8 +67,7 @@
 		     "marvell,armadaxp", "marvell,armada-370-xp";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
-- 
2.1.0

[PATCH v3 08/20] ARM: mvebu: fix unit address of MPIC nodes

[Thomas Petazzoni]

The Device Tree nodes describing the MPIC nodes on Armada 370, 375,
38x and XP had a unit address that did not match the first reg
property, as suggested by the ePAPR. This commit fixes that.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 arch/arm/boot/dts/armada-370-xp.dtsi | 2 +-
 arch/arm/boot/dts/armada-370.dtsi    | 2 +-
 arch/arm/boot/dts/armada-375.dtsi    | 2 +-
 arch/arm/boot/dts/armada-38x.dtsi    | 2 +-
 arch/arm/boot/dts/armada-xp.dtsi     | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 1058cf6..7b3393e 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -223,7 +223,7 @@
 				      <0x20250 0x8>;
 			};
 
-			mpic: interrupt-controller@20000 {
+			mpic: interrupt-controller@20a00 {
 				compatible = "marvell,mpic";
 				#interrupt-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 27397f1..50f259b 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -232,7 +232,7 @@
 				reg = <0x18330 0x4>;
 			};
 
-			interrupt-controller@20000 {
+			interrupt-controller@20a00 {
 				reg = <0x20a00 0x1d0>, <0x21870 0x58>;
 			};
 
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 6420693..c6fedf2 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -394,7 +394,7 @@
 				reg = <0x20000 0x100>, <0x20180 0x20>;
 			};
 
-			mpic: interrupt-controller@20000 {
+			mpic: interrupt-controller@20a00 {
 				compatible = "marvell,mpic";
 				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 				#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 7cf6657..6aaba7c6 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -367,7 +367,7 @@
 				reg = <0x20000 0x100>, <0x20180 0x20>;
 			};
 
-			mpic: interrupt-controller@20000 {
+			mpic: interrupt-controller@20a00 {
 				compatible = "marvell,mpic";
 				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 				#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index bbabee5..ff47345 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -154,7 +154,7 @@
 				clocks = <&coreclk 1>;
 			};
 
-			interrupt-controller@20000 {
+			interrupt-controller@20a00 {
 			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 			};
 
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 09/20] devicetree: bindings: add DT binding for the Marvell Armada 39x SoC family

[Thomas Petazzoni]

The Marvell Armada 39x is a family of two SoCs: the Armada 390 and the
Armada 398, with a slightly different number of interfaces. This
commit introduces the Device Tree binding that documents the top-level
compatible strings for Armada 39x based platforms.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Acked-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 Documentation/devicetree/bindings/arm/armada-39x.txt | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/armada-39x.txt

diff --git a/Documentation/devicetree/bindings/arm/armada-39x.txt b/Documentation/devicetree/bindings/arm/armada-39x.txt
new file mode 100644
index 0000000..53d4ff9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armada-39x.txt
@@ -0,0 +1,20 @@
+Marvell Armada 39x Platforms Device Tree Bindings
+-------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 39x family shall have the
+following property:
+
+Required root node property:
+
+ - compatible: must contain "marvell,armada390"
+
+In addition, boards using the Marvell Armada 398 SoC shall have the
+following property before the previous one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada398"
+
+Example:
+
+compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 10/20] devicetree: bindings: update DT bindings for Marvell EBU clock support

[Thomas Petazzoni]

With the introduction of the Marvell Armada 39x SoC, the DT bindings
for Marvell EBU clocks need to be extended. This commit include the
corresponding update to the Device Tree bindings documentation.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 .../devicetree/bindings/clock/mvebu-core-clock.txt        |  9 +++++++++
 .../devicetree/bindings/clock/mvebu-gated-clock.txt       | 15 ++++++++++++++-
 2 files changed, 23 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
index dc5ea5b..670c2af 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
@@ -23,6 +23,14 @@ The following is a list of provided IDs and clock names on Armada 380/385:
  2 = l2clk   (L2 Cache clock)
  3 = ddrclk  (DDR clock)
 
+The following is a list of provided IDs and clock names on Armada 39x:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = nbclk   (Coherent Fabric clock)
+ 3 = hclk    (SDRAM Controller Internal Clock)
+ 4 = dclk    (SDRAM Interface Clock)
+ 5 = refclk  (Reference Clock)
+
 The following is a list of provided IDs and clock names on Kirkwood and Dove:
  0 = tclk   (Internal Bus clock)
  1 = cpuclk (CPU0 clock)
@@ -39,6 +47,7 @@ Required properties:
 	"marvell,armada-370-core-clock" - For Armada 370 SoC core clocks
 	"marvell,armada-375-core-clock" - For Armada 375 SoC core clocks
 	"marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks
+	"marvell,armada-390-core-clock" - For Armada 39x SoC core clocks
 	"marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
 	"marvell,dove-core-clock" - for Dove SoC core clocks
 	"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
index 76477be..31c7c0c 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -1,6 +1,6 @@
 * Gated Clock bindings for Marvell EBU SoCs
 
-Marvell Armada 370/375/380/385/XP, Dove and Kirkwood allow some
+Marvell Armada 370/375/380/385/39x/XP, Dove and Kirkwood allow some
 peripheral clocks to be gated to save some power. The clock consumer
 should specify the desired clock by having the clock ID in its
 "clocks" phandle cell. The clock ID is directly mapped to the
@@ -77,6 +77,18 @@ ID	Clock		Peripheral
 28	xor1		XOR 1
 30	sata1		SATA 1
 
+The following is a list of provided IDs for Armada 39x:
+ID	Clock		Peripheral
+-----------------------------------
+5	pex1		PCIe 1
+6	pex2		PCIe 2
+7	pex3		PCIe 3
+8	pex0		PCIe 0
+9	usb3h0		USB3 Host 0
+17	sdio		SDIO
+22	xor0		XOR 0
+28	xor1		XOR 1
+
 The following is a list of provided IDs for Armada XP:
 ID	Clock	Peripheral
 -----------------------------------
@@ -152,6 +164,7 @@ Required properties:
 	"marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating
 	"marvell,armada-375-gating-clock" - for Armada 375 SoC clock gating
 	"marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating
+	"marvell,armada-390-gating-clock" - for Armada 39x SoC clock gating
 	"marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating
 	"marvell,dove-gating-clock" - for Dove SoC clock gating
 	"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 11/20] devicetree: bindings: add Device Tree bindings for Armada 39x pin-muxing controller

[Thomas Petazzoni]

This commit adds the Device Tree binding documentation to describe the
pin-muxing controller of the Marvell Armada 39x processors. Two
variants are supported for the moment: the 88F6920 (Armada 390) and
88F6928 (Armada 398).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 .../pinctrl/marvell,armada-39x-pinctrl.txt         | 78 ++++++++++++++++++++++
 1 file changed, 78 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt
new file mode 100644
index 0000000..5b1a9dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt
@@ -0,0 +1,78 @@
+* Marvell Armada 39x SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6920-pinctrl", "marvell,88f6928-pinctrl"
+  depending on the specific variant of the SoC being used.
+- reg: register specifier of MPP registers
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name    pins    functions
+================================================================================
+mpp0	0	gpio, ua0(rxd)
+mpp1	1	gpio, ua0(txd)
+mpp2	2	gpio, i2c0(sck)
+mpp3	3	gpio, i2c0(sda)
+mpp4	4	gpio, ua1(txd), ua0(rts), smi(mdc)
+mpp5	5	gpio, ua1(rxd), ua0(cts), smi(mdio)
+mpp6	6	gpio, dev(cs3), xsmi(mdio)
+mpp7	7	gpio, dev(ad9), xsmi(mdc)
+mpp8	8	gpio, dev(ad10), ptp(trig)
+mpp9	9	gpio, dev(ad11), ptp(clk)
+mpp10	10	gpio, dev(ad12), ptp(event)
+mpp11	11	gpio, dev(ad13), led(clk)
+mpp12	12	gpio, pcie0(rstout), dev(ad14), led(stb)
+mpp13	13	gpio, dev(ad15), led(data)
+mpp14	14	gpio, m(vtt), dev(wen1), ua1(txd)
+mpp15	15	gpio, pcie0(rstout), spi0(mosi), i2c1(sck)
+mpp16	16	gpio, m(decc), spi0(miso), i2c1(sda)
+mpp17	17	gpio, ua1(rxd), spi0(sck), smi(mdio)
+mpp18	18	gpio, ua1(txd), spi0(cs0), i2c2(sck)
+mpp19	19	gpio, sata1(present) [1], ua0(cts), ua1(rxd), i2c2(sda)
+mpp20	20	gpio, sata0(present) [1], ua0(rts), ua1(txd), smi(mdc)
+mpp21	21	gpio, spi0(cs1), sata0(present) [1], sd(cmd), dev(bootcs), ge(rxd0)
+mpp22	22	gpio, spi0(mosi), dev(ad0)
+mpp23	23	gpio, spi0(sck), dev(ad2)
+mpp24	24	gpio, spi0(miso), ua0(cts), ua1(rxd), sd(d4), dev(readyn)
+mpp25	25	gpio, spi0(cs0), ua0(rts), ua1(txd), sd(d5), dev(cs0)
+mpp26	26	gpio, spi0(cs2), i2c1(sck), sd(d6), dev(cs1)
+mpp27	27	gpio, spi0(cs3), i2c1(sda), sd(d7), dev(cs2), ge(txclkout)
+mpp28	28	gpio, sd(clk), dev(ad5), ge(txd0)
+mpp29	29	gpio, dev(ale0), ge(txd1)
+mpp30	30	gpio, dev(oen), ge(txd2)
+mpp31	31	gpio, dev(ale1), ge(txd3)
+mpp32	32	gpio, dev(wen0), ge(txctl)
+mpp33	33	gpio, m(decc), dev(ad3)
+mpp34	34	gpio, dev(ad1)
+mpp35	35	gpio, ref(clk), dev(a1)
+mpp36	36	gpio, dev(a0)
+mpp37	37	gpio, sd(d3), dev(ad8), ge(rxclk)
+mpp38	38	gpio, ref(clk), sd(d0), dev(ad4), ge(rxd1)
+mpp39	39	gpio, i2c1(sck), ua0(cts), sd(d1), dev(a2), ge(rxd2)
+mpp40	40	gpio, i2c1(sda), ua0(rts), sd(d2), dev(ad6), ge(rxd3)
+mpp41	41	gpio, ua1(rxd), ua0(cts), spi1(cs3), dev(burstn), nd(rbn0), ge(rxctl)
+mpp42	42	gpio, ua1(txd), ua0(rts), dev(ad7)
+mpp43	43	gpio, pcie0(clkreq), m(vtt), m(decc), spi1(cs2), dev(clkout), nd(rbn1)
+mpp44	44	gpio, sata0(present) [1], sata1(present) [1], led(clk)
+mpp45	45	gpio, ref(clk), pcie0(rstout), ua1(rxd)
+mpp46	46	gpio, ref(clk), pcie0(rstout), ua1(txd), led(stb)
+mpp47	47	gpio, sata0(present) [1], sata1(present) [1], led(data)
+mpp48	48	gpio, sata0(present) [1], m(vtt), tdm(pclk) [1], audio(mclk) [1], sd(d4), pcie0(clkreq), ua1(txd)
+mpp49	49	gpio, tdm(fsync) [1], audio(lrclk) [1], sd(d5), ua2(rxd)
+mpp50	50	gpio, pcie0(rstout), tdm(drx) [1], audio(extclk) [1], sd(cmd), ua2(rxd)
+mpp51	51	gpio, tdm(dtx) [1], audio(sdo) [1], m(decc), ua2(txd)
+mpp52	52	gpio, pcie0(rstout), tdm(intn) [1], audio(sdi) [1], sd(d6), i2c3(sck)
+mpp53	53	gpio, sata1(present) [1], sata0(present) [1], tdm(rstn) [1], audio(bclk) [1], sd(d7), i2c3(sda)
+mpp54	54	gpio, sata0(present) [1], sata1(present) [1], pcie0(rstout), sd(d3), ua3(txd)
+mpp55	55	gpio, ua1(cts), spi1(cs1), sd(d0), ua1(rxd), ua3(rxd)
+mpp56	56	gpio, ua1(rts), m(decc), spi1(mosi), ua1(txd)
+mpp57	57	gpio, spi1(sck), sd(clk), ua1(txd)
+mpp58	58	gpio, i2c1(sck), pcie2(clkreq), spi1(miso), sd(d1), ua1(rxd)
+mpp59	59	gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd(d2)
+
+[1]: only available on 88F6928
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 12/20] devicetree: bindings: add new SMP enable method for Marvell Armada 39x

[Thomas Petazzoni]

This commit updates the ARM CPUs Device Tree binding to document a new
enable method of Marvell Armada 39x processors.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 Documentation/devicetree/bindings/arm/cpus.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 8b9e0a9..6aa331d 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -192,6 +192,7 @@ nodes to be present and contain the properties described below.
 			    "brcm,brahma-b15"
 			    "marvell,armada-375-smp"
 			    "marvell,armada-380-smp"
+			    "marvell,armada-390-smp"
 			    "marvell,armada-xp-smp"
 			    "qcom,gcc-msm8660"
 			    "qcom,kpss-acc-v1"
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 13/20] clk: mvebu: extend common code to allow an optional refclk

[Thomas Petazzoni]

The Armada 39x, contrary to its predecessor, has a configurable
reference clock frequency, of either 25 Mhz, or 40 Mhz. For the
previous SoCs, it was fixed to 25 Mhz and described directly as such
in the Device Tree.

For Armada 39x, we need to read certain registers to know whether the
frequency is 25 or 40 Mhz. Therefore, this commit extends the common
mvebu clock code to allow the SoC-specific code to say it wants to
register a reference clock, by giving a non-NULL ->get_refclk_freq()
function pointer in its coreclk_soc_desc structure.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 drivers/clk/mvebu/common.c | 17 +++++++++++++++++
 drivers/clk/mvebu/common.h |  1 +
 2 files changed, 18 insertions(+)

diff --git a/drivers/clk/mvebu/common.c b/drivers/clk/mvebu/common.c
index 0d4d121..15b370f 100644
--- a/drivers/clk/mvebu/common.c
+++ b/drivers/clk/mvebu/common.c
@@ -121,6 +121,11 @@ void __init mvebu_coreclk_setup(struct device_node *np,
 
 	/* Allocate struct for TCLK, cpu clk, and core ratio clocks */
 	clk_data.clk_num = 2 + desc->num_ratios;
+
+	/* One more clock for the optional refclk */
+	if (desc->get_refclk_freq)
+		clk_data.clk_num += 1;
+
 	clk_data.clks = kzalloc(clk_data.clk_num * sizeof(struct clk *),
 				GFP_KERNEL);
 	if (WARN_ON(!clk_data.clks)) {
@@ -162,6 +167,18 @@ void __init mvebu_coreclk_setup(struct device_node *np,
 		WARN_ON(IS_ERR(clk_data.clks[2+n]));
 	};
 
+	/* Register optional refclk */
+	if (desc->get_refclk_freq) {
+		const char *name = "refclk";
+		of_property_read_string_index(np, "clock-output-names",
+					      2 + desc->num_ratios, &name);
+		rate = desc->get_refclk_freq(base);
+		clk_data.clks[2 + desc->num_ratios] =
+			clk_register_fixed_rate(NULL, name, NULL,
+						CLK_IS_ROOT, rate);
+		WARN_ON(IS_ERR(clk_data.clks[2 + desc->num_ratios]));
+	}
+
 	/* SAR register isn't needed anymore */
 	iounmap(base);
 
diff --git a/drivers/clk/mvebu/common.h b/drivers/clk/mvebu/common.h
index 783b563..f0de6c8 100644
--- a/drivers/clk/mvebu/common.h
+++ b/drivers/clk/mvebu/common.h
@@ -30,6 +30,7 @@ struct coreclk_soc_desc {
 	u32 (*get_tclk_freq)(void __iomem *sar);
 	u32 (*get_cpu_freq)(void __iomem *sar);
 	void (*get_clk_ratio)(void __iomem *sar, int id, int *mult, int *div);
+	u32 (*get_refclk_freq)(void __iomem *sar);
 	bool (*is_sscg_enabled)(void __iomem *sar);
 	u32 (*fix_sscg_deviation)(u32 system_clk);
 	const struct coreclk_ratio *ratios;
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 14/20] clk: mvebu: add Marvell Armada 39x driver

[Thomas Petazzoni]

This commit adds a new clock driver for the Marvell Armada 39x family
of processors. This driver is fairly similar to the ones already used
on other Marvell EBU processors, with the following main differences:

 * Different set of ratios
 * Different set of core clocks
 * Configurable reference clock in frequency

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/clk/mvebu/Kconfig      |   4 ++
 drivers/clk/mvebu/Makefile     |   1 +
 drivers/clk/mvebu/armada-39x.c | 156 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 161 insertions(+)
 create mode 100644 drivers/clk/mvebu/armada-39x.c

diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig
index 3b34dba..2769625 100644
--- a/drivers/clk/mvebu/Kconfig
+++ b/drivers/clk/mvebu/Kconfig
@@ -21,6 +21,10 @@ config ARMADA_38X_CLK
 	bool
 	select MVEBU_CLK_COMMON
 
+config ARMADA_39X_CLK
+	bool
+	select MVEBU_CLK_COMMON
+
 config ARMADA_XP_CLK
 	bool
 	select MVEBU_CLK_COMMON
diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile
index a9a56fc..645ac7e 100644
--- a/drivers/clk/mvebu/Makefile
+++ b/drivers/clk/mvebu/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_MVEBU_CLK_COREDIV)	+= clk-corediv.o
 obj-$(CONFIG_ARMADA_370_CLK)	+= armada-370.o
 obj-$(CONFIG_ARMADA_375_CLK)	+= armada-375.o
 obj-$(CONFIG_ARMADA_38X_CLK)	+= armada-38x.o
+obj-$(CONFIG_ARMADA_39X_CLK)	+= armada-39x.o
 obj-$(CONFIG_ARMADA_XP_CLK)	+= armada-xp.o
 obj-$(CONFIG_DOVE_CLK)		+= dove.o
 obj-$(CONFIG_KIRKWOOD_CLK)	+= kirkwood.o
diff --git a/drivers/clk/mvebu/armada-39x.c b/drivers/clk/mvebu/armada-39x.c
new file mode 100644
index 0000000..efb974d
--- /dev/null
+++ b/drivers/clk/mvebu/armada-39x.c
@@ -0,0 +1,156 @@
+/*
+ * Marvell Armada 39x SoC clocks
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include "common.h"
+
+/*
+ * SARL[14:10] : Ratios between CPU, NBCLK, HCLK and DCLK.
+ *
+ * SARL[15]    : TCLK frequency
+ *		 0 = 250 MHz
+ *		 1 = 200 MHz
+ *
+ * SARH[0]     : Reference clock frequency
+ *               0 = 25 Mhz
+ *               1 = 40 Mhz
+ */
+
+#define SARL 					0
+#define  SARL_A390_TCLK_FREQ_OPT		15
+#define  SARL_A390_TCLK_FREQ_OPT_MASK		0x1
+#define  SARL_A390_CPU_DDR_L2_FREQ_OPT		10
+#define  SARL_A390_CPU_DDR_L2_FREQ_OPT_MASK	0x1F
+#define SARH					4
+#define  SARH_A390_REFCLK_FREQ			BIT(0)
+
+static const u32 armada_39x_tclk_frequencies[] __initconst = {
+	250000000,
+	200000000,
+};
+
+static u32 __init armada_39x_get_tclk_freq(void __iomem *sar)
+{
+	u8 tclk_freq_select;
+
+	tclk_freq_select = ((readl(sar + SARL) >> SARL_A390_TCLK_FREQ_OPT) &
+			    SARL_A390_TCLK_FREQ_OPT_MASK);
+	return armada_39x_tclk_frequencies[tclk_freq_select];
+}
+
+static const u32 armada_39x_cpu_frequencies[] __initconst = {
+	[0x0] = 666 * 1000 * 1000,
+	[0x2] = 800 * 1000 * 1000,
+	[0x3] = 800 * 1000 * 1000,
+	[0x4] = 1066 * 1000 * 1000,
+	[0x5] = 1066 * 1000 * 1000,
+	[0x6] = 1200 * 1000 * 1000,
+	[0x8] = 1332 * 1000 * 1000,
+	[0xB] = 1600 * 1000 * 1000,
+	[0xC] = 1600 * 1000 * 1000,
+	[0x12] = 1800 * 1000 * 1000,
+	[0x1E] = 1800 * 1000 * 1000,
+};
+
+static u32 __init armada_39x_get_cpu_freq(void __iomem *sar)
+{
+	u8 cpu_freq_select;
+
+	cpu_freq_select = ((readl(sar + SARL) >> SARL_A390_CPU_DDR_L2_FREQ_OPT) &
+			   SARL_A390_CPU_DDR_L2_FREQ_OPT_MASK);
+	if (cpu_freq_select >= ARRAY_SIZE(armada_39x_cpu_frequencies)) {
+		pr_err("Selected CPU frequency (%d) unsupported\n",
+			cpu_freq_select);
+		return 0;
+	}
+
+	return armada_39x_cpu_frequencies[cpu_freq_select];
+}
+
+enum { A390_CPU_TO_NBCLK, A390_CPU_TO_HCLK, A390_CPU_TO_DCLK };
+
+static const struct coreclk_ratio armada_39x_coreclk_ratios[] __initconst = {
+	{ .id = A390_CPU_TO_NBCLK, .name = "nbclk" },
+	{ .id = A390_CPU_TO_HCLK, .name = "hclk" },
+	{ .id = A390_CPU_TO_DCLK, .name = "dclk" },
+};
+
+static void __init armada_39x_get_clk_ratio(
+	void __iomem *sar, int id, int *mult, int *div)
+{
+	switch (id) {
+	case A390_CPU_TO_NBCLK:
+		*mult = 1;
+		*div = 2;
+		break;
+	case A390_CPU_TO_HCLK:
+		*mult = 1;
+		*div = 4;
+		break;
+	case A390_CPU_TO_DCLK:
+		*mult = 1;
+		*div = 2;
+		break;
+	}
+}
+
+static u32 __init armada_39x_refclk_ratio(void __iomem *sar)
+{
+	if (readl(sar + SARH) & SARH_A390_REFCLK_FREQ)
+		return 40 * 1000 * 1000;
+	else
+		return 25 * 1000 * 1000;
+}
+
+static const struct coreclk_soc_desc armada_39x_coreclks = {
+	.get_tclk_freq = armada_39x_get_tclk_freq,
+	.get_cpu_freq = armada_39x_get_cpu_freq,
+	.get_clk_ratio = armada_39x_get_clk_ratio,
+	.get_refclk_freq = armada_39x_refclk_ratio,
+	.ratios = armada_39x_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(armada_39x_coreclk_ratios),
+};
+
+static void __init armada_39x_coreclk_init(struct device_node *np)
+{
+	mvebu_coreclk_setup(np, &armada_39x_coreclks);
+}
+CLK_OF_DECLARE(armada_39x_core_clk, "marvell,armada-390-core-clock",
+	       armada_39x_coreclk_init);
+
+/*
+ * Clock Gating Control
+ */
+static const struct clk_gating_soc_desc armada_39x_gating_desc[] __initconst = {
+	{ "pex1", NULL, 5 },
+	{ "pex2", NULL, 6 },
+	{ "pex3", NULL, 7 },
+	{ "pex0", NULL, 8 },
+	{ "usb3h0", NULL, 9 },
+	{ "sdio", NULL, 17 },
+	{ "xor0", NULL, 22 },
+	{ "xor1", NULL, 28 },
+	{ }
+};
+
+static void __init armada_39x_clk_gating_init(struct device_node *np)
+{
+	mvebu_clk_gating_setup(np, armada_39x_gating_desc);
+}
+CLK_OF_DECLARE(armada_39x_clk_gating, "marvell,armada-390-gating-clock",
+	       armada_39x_clk_gating_init);
-- 
2.1.0

[PATCH v3 15/20] pinctrl: mvebu: add pinctrl driver for Marvell Armada 39x

[Thomas Petazzoni]

This commit adds a new pinctrl driver for the Marvell Armada 39x
family of processors, which hooks into the existing infrastructure to
support pin-muxing on Marvell EBU processors. Two variants of the
Armada 39x are supported: 88F6920 (Armada 390) and 88F6928 (Armada
398), which have a few differences in the available functions for
certain pins.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 drivers/pinctrl/mvebu/Kconfig              |   4 +
 drivers/pinctrl/mvebu/Makefile             |   1 +
 drivers/pinctrl/mvebu/pinctrl-armada-39x.c | 432 +++++++++++++++++++++++++++++
 3 files changed, 437 insertions(+)
 create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-39x.c

diff --git a/drivers/pinctrl/mvebu/Kconfig b/drivers/pinctrl/mvebu/Kconfig
index d6dd835..1706024 100644
--- a/drivers/pinctrl/mvebu/Kconfig
+++ b/drivers/pinctrl/mvebu/Kconfig
@@ -26,6 +26,10 @@ config PINCTRL_ARMADA_38X
 	bool
 	select PINCTRL_MVEBU
 
+config PINCTRL_ARMADA_39X
+	bool
+	select PINCTRL_MVEBU
+
 config PINCTRL_ARMADA_XP
 	bool
 	select PINCTRL_MVEBU
diff --git a/drivers/pinctrl/mvebu/Makefile b/drivers/pinctrl/mvebu/Makefile
index a0818e9..554d8af 100644
--- a/drivers/pinctrl/mvebu/Makefile
+++ b/drivers/pinctrl/mvebu/Makefile
@@ -4,5 +4,6 @@ obj-$(CONFIG_PINCTRL_KIRKWOOD)	+= pinctrl-kirkwood.o
 obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o
 obj-$(CONFIG_PINCTRL_ARMADA_375) += pinctrl-armada-375.o
 obj-$(CONFIG_PINCTRL_ARMADA_38X) += pinctrl-armada-38x.o
+obj-$(CONFIG_PINCTRL_ARMADA_39X) += pinctrl-armada-39x.o
 obj-$(CONFIG_PINCTRL_ARMADA_XP)  += pinctrl-armada-xp.o
 obj-$(CONFIG_PINCTRL_ORION)  += pinctrl-orion.o
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-39x.c b/drivers/pinctrl/mvebu/pinctrl-armada-39x.c
new file mode 100644
index 0000000..5963411
--- /dev/null
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-39x.c
@@ -0,0 +1,432 @@
+/*
+ * Marvell Armada 39x pinctrl driver based on mvebu pinctrl core
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-mvebu.h"
+
+static void __iomem *mpp_base;
+
+static int armada_39x_mpp_ctrl_get(unsigned pid, unsigned long *config)
+{
+	return default_mpp_ctrl_get(mpp_base, pid, config);
+}
+
+static int armada_39x_mpp_ctrl_set(unsigned pid, unsigned long config)
+{
+	return default_mpp_ctrl_set(mpp_base, pid, config);
+}
+
+enum {
+	V_88F6920 = BIT(0),
+	V_88F6928 = BIT(1),
+	V_88F6920_PLUS = (V_88F6920 | V_88F6928),
+};
+
+static struct mvebu_mpp_mode armada_39x_mpp_modes[] = {
+	MPP_MODE(0,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "ua0",     "rxd",      V_88F6920_PLUS)),
+	MPP_MODE(1,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "ua0",     "txd",      V_88F6920_PLUS)),
+	MPP_MODE(2,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "i2c0",    "sck",      V_88F6920_PLUS)),
+	MPP_MODE(3,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "i2c0",    "sda",      V_88F6920_PLUS)),
+	MPP_MODE(4,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(2, "ua1",     "txd",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "ua0",     "rts",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "smi",     "mdc",      V_88F6920_PLUS)),
+	MPP_MODE(5,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(2, "ua1",     "rxd",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "ua0",     "cts",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "smi",     "mdio",     V_88F6920_PLUS)),
+	MPP_MODE(6,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "cs3",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "xsmi",    "mdio",     V_88F6920_PLUS)),
+	MPP_MODE(7,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ad9",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "xsmi",    "mdc",      V_88F6920_PLUS)),
+	MPP_MODE(8,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ad10",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "ptp",     "trig",     V_88F6920_PLUS)),
+	MPP_MODE(9,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ad11",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "ptp",     "clk",      V_88F6920_PLUS)),
+	MPP_MODE(10,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ad12",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "ptp",     "event",    V_88F6920_PLUS)),
+	MPP_MODE(11,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ad13",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "led",     "clk",      V_88F6920_PLUS)),
+	MPP_MODE(12,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(2, "pcie0",   "rstout",   V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ad14",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "led",     "stb",      V_88F6920_PLUS)),
+	MPP_MODE(13,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ad15",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "led",     "data",     V_88F6920_PLUS)),
+	MPP_MODE(14,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "m",       "vtt",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "wen1",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "ua1",     "txd",      V_88F6920_PLUS)),
+	MPP_MODE(15,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "pcie0",   "rstout",   V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "spi0",    "mosi",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "i2c1",    "sck",      V_88F6920_PLUS)),
+	MPP_MODE(16,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "m",       "decc",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "spi0",    "miso",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "i2c1",    "sda",      V_88F6920_PLUS)),
+	MPP_MODE(17,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "ua1",     "rxd",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "spi0",    "sck",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "smi",     "mdio",     V_88F6920_PLUS)),
+	MPP_MODE(18,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "ua1",     "txd",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "spi0",    "cs0",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "i2c2",    "sck",      V_88F6920_PLUS)),
+	MPP_MODE(19,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "sata1",   "present",  V_88F6928),
+		 MPP_VAR_FUNCTION(5, "ua0",     "cts",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(6, "ua1",     "rxd",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "i2c2",    "sda",      V_88F6920_PLUS)),
+	MPP_MODE(20,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "sata0",   "present",  V_88F6928),
+		 MPP_VAR_FUNCTION(5, "ua0",     "rts",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(6, "ua1",     "txd",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "smi",     "mdc",      V_88F6920_PLUS)),
+	MPP_MODE(21,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "spi0",    "cs1",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "sata0",   "present",  V_88F6928),
+		 MPP_VAR_FUNCTION(4, "sd",      "cmd",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "bootcs",   V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(8, "ge",      "rxd0",     V_88F6920_PLUS)),
+	MPP_MODE(22,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "spi0",    "mosi",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ad0",      V_88F6920_PLUS)),
+	MPP_MODE(23,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "spi0",    "sck",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ad2",      V_88F6920_PLUS)),
+	MPP_MODE(24,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "spi0",    "miso",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(2, "ua0",     "cts",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "ua1",     "rxd",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "sd",      "d4",       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "readyn",   V_88F6920_PLUS)),
+	MPP_MODE(25,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "spi0",    "cs0",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(2, "ua0",     "rts",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "ua1",     "txd",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "sd",      "d5",       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "cs0",      V_88F6920_PLUS)),
+	MPP_MODE(26,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "spi0",    "cs2",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "i2c1",    "sck",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "sd",      "d6",       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "cs1",      V_88F6920_PLUS)),
+	MPP_MODE(27,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "spi0",    "cs3",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "i2c1",    "sda",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "sd",      "d7",       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "cs2",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(8, "ge",      "txclkout", V_88F6920_PLUS)),
+	MPP_MODE(28,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "sd",      "clk",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ad5",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(8, "ge",      "txd0",     V_88F6920_PLUS)),
+	MPP_MODE(29,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ale0",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(8, "ge",      "txd1",     V_88F6920_PLUS)),
+	MPP_MODE(30,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "oen",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(8, "ge",      "txd2",     V_88F6920_PLUS)),
+	MPP_MODE(31,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ale1",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(8, "ge",      "txd3",     V_88F6920_PLUS)),
+	MPP_MODE(32,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "wen0",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(8, "ge",      "txctl",    V_88F6920_PLUS)),
+	MPP_MODE(33,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "m",       "decc",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ad3",      V_88F6920_PLUS)),
+	MPP_MODE(34,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ad1",      V_88F6920_PLUS)),
+	MPP_MODE(35,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "ref",     "clk",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "a1",       V_88F6920_PLUS)),
+	MPP_MODE(36,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "a0",       V_88F6920_PLUS)),
+	MPP_MODE(37,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "sd",      "d3",       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ad8",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(8, "ge",      "rxclk",    V_88F6920_PLUS)),
+	MPP_MODE(38,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "ref",     "clk",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "sd",      "d0",       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ad4",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(8, "ge",      "rxd1",     V_88F6920_PLUS)),
+	MPP_MODE(39,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "i2c1",    "sck",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "ua0",     "cts",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "sd",      "d1",       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "a2",       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(8, "ge",      "rxd2",     V_88F6920_PLUS)),
+	MPP_MODE(40,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "i2c1",    "sda",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "ua0",     "rts",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "sd",      "d2",       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ad6",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(8, "ge",      "rxd3",     V_88F6920_PLUS)),
+	MPP_MODE(41,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "ua1",     "rxd",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "ua0",     "cts",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "spi1",    "cs3",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "burstn",   V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(6, "nd",      "rbn0",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(8, "ge",      "rxctl",    V_88F6920_PLUS)),
+	MPP_MODE(42,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "ua1",     "txd",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "ua0",     "rts",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "ad7",      V_88F6920_PLUS)),
+	MPP_MODE(43,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "pcie0",   "clkreq",   V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(2, "m",       "vtt",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "m",       "decc",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "spi1",    "cs2",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "dev",     "clkout",   V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(6, "nd",      "rbn1",     V_88F6920_PLUS)),
+	MPP_MODE(44,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "sata0",   "present",  V_88F6928),
+		 MPP_VAR_FUNCTION(2, "sata1",   "present",  V_88F6928),
+		 MPP_VAR_FUNCTION(7, "led",     "clk",      V_88F6920_PLUS)),
+	MPP_MODE(45,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "ref",     "clk",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(2, "pcie0",   "rstout",   V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(6, "ua1",     "rxd",      V_88F6920_PLUS)),
+	MPP_MODE(46,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "ref",     "clk",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(2, "pcie0",   "rstout",   V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(6, "ua1",     "txd",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "led",     "stb",      V_88F6920_PLUS)),
+	MPP_MODE(47,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "sata0",   "present",  V_88F6928),
+		 MPP_VAR_FUNCTION(2, "sata1",   "present",  V_88F6928),
+		 MPP_VAR_FUNCTION(7, "led",     "data",     V_88F6920_PLUS)),
+	MPP_MODE(48,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "sata0",   "present",  V_88F6928),
+		 MPP_VAR_FUNCTION(2, "m",       "vtt",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "tdm",     "pclk",     V_88F6928),
+		 MPP_VAR_FUNCTION(4, "audio",   "mclk",     V_88F6928),
+		 MPP_VAR_FUNCTION(5, "sd",      "d4",       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(6, "pcie0",   "clkreq",   V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "ua1",     "txd",      V_88F6920_PLUS)),
+	MPP_MODE(49,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "tdm",     "fsync",    V_88F6928),
+		 MPP_VAR_FUNCTION(4, "audio",   "lrclk",    V_88F6928),
+		 MPP_VAR_FUNCTION(5, "sd",      "d5",       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "ua2",     "rxd",      V_88F6920_PLUS)),
+	MPP_MODE(50,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "pcie0",   "rstout",   V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "tdm",     "drx",      V_88F6928),
+		 MPP_VAR_FUNCTION(4, "audio",   "extclk",   V_88F6928),
+		 MPP_VAR_FUNCTION(5, "sd",      "cmd",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "ua2",     "rxd",      V_88F6920_PLUS)),
+	MPP_MODE(51,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "tdm",     "dtx",      V_88F6928),
+		 MPP_VAR_FUNCTION(4, "audio",   "sdo",      V_88F6928),
+		 MPP_VAR_FUNCTION(5, "m",       "decc",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "ua2",     "txd",      V_88F6920_PLUS)),
+	MPP_MODE(52,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "pcie0",   "rstout",   V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "tdm",     "intn",     V_88F6928),
+		 MPP_VAR_FUNCTION(4, "audio",   "sdi",      V_88F6928),
+		 MPP_VAR_FUNCTION(5, "sd",      "d6",       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "i2c3",    "sck",      V_88F6920_PLUS)),
+	MPP_MODE(53,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "sata1",   "present",  V_88F6928),
+		 MPP_VAR_FUNCTION(2, "sata0",   "present",  V_88F6928),
+		 MPP_VAR_FUNCTION(3, "tdm",     "rstn",     V_88F6928),
+		 MPP_VAR_FUNCTION(4, "audio",   "bclk",     V_88F6928),
+		 MPP_VAR_FUNCTION(5, "sd",      "d7",       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "i2c3",    "sda",      V_88F6920_PLUS)),
+	MPP_MODE(54,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "sata0",   "present",  V_88F6928),
+		 MPP_VAR_FUNCTION(2, "sata1",   "present",  V_88F6928),
+		 MPP_VAR_FUNCTION(3, "pcie0",   "rstout",   V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "sd",      "d3",       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "ua3",     "txd",      V_88F6920_PLUS)),
+	MPP_MODE(55,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "ua1",     "cts",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "spi1",    "cs1",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "sd",      "d0",       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(6, "ua1",     "rxd",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(7, "ua3",     "rxd",      V_88F6920_PLUS)),
+	MPP_MODE(56,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "ua1",     "rts",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "m",       "decc",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "spi1",    "mosi",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(6, "ua1",     "txd",      V_88F6920_PLUS)),
+	MPP_MODE(57,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "spi1",    "sck",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "sd",      "clk",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(6, "ua1",     "txd",      V_88F6920_PLUS)),
+	MPP_MODE(58,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(2, "i2c1",    "sck",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(3, "pcie2",   "clkreq",   V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "spi1",    "miso",     V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "sd",      "d1",       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(6, "ua1",     "rxd",      V_88F6920_PLUS)),
+	MPP_MODE(59,
+		 MPP_VAR_FUNCTION(0, "gpio",    NULL,       V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(1, "pcie0",   "rstout",   V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(2, "i2c1",    "sda",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(4, "spi1",    "cs0",      V_88F6920_PLUS),
+		 MPP_VAR_FUNCTION(5, "sd",      "d2",       V_88F6920_PLUS)),
+};
+
+static struct mvebu_pinctrl_soc_info armada_39x_pinctrl_info;
+
+static struct of_device_id armada_39x_pinctrl_of_match[] = {
+	{
+		.compatible = "marvell,mv88f6920-pinctrl",
+		.data       = (void *) V_88F6920,
+	},
+	{
+		.compatible = "marvell,mv88f6928-pinctrl",
+		.data       = (void *) V_88F6928,
+	},
+	{ },
+};
+
+static struct mvebu_mpp_ctrl armada_39x_mpp_controls[] = {
+	MPP_FUNC_CTRL(0, 59, NULL, armada_39x_mpp_ctrl),
+};
+
+static struct pinctrl_gpio_range armada_39x_mpp_gpio_ranges[] = {
+	MPP_GPIO_RANGE(0,   0,  0, 32),
+	MPP_GPIO_RANGE(1,  32, 32, 27),
+};
+
+static int armada_39x_pinctrl_probe(struct platform_device *pdev)
+{
+	struct mvebu_pinctrl_soc_info *soc = &armada_39x_pinctrl_info;
+	const struct of_device_id *match =
+		of_match_device(armada_39x_pinctrl_of_match, &pdev->dev);
+	struct resource *res;
+
+	if (!match)
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mpp_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mpp_base))
+		return PTR_ERR(mpp_base);
+
+	soc->variant = (unsigned) match->data & 0xff;
+	soc->controls = armada_39x_mpp_controls;
+	soc->ncontrols = ARRAY_SIZE(armada_39x_mpp_controls);
+	soc->gpioranges = armada_39x_mpp_gpio_ranges;
+	soc->ngpioranges = ARRAY_SIZE(armada_39x_mpp_gpio_ranges);
+	soc->modes = armada_39x_mpp_modes;
+	soc->nmodes = armada_39x_mpp_controls[0].npins;
+
+	pdev->dev.platform_data = soc;
+
+	return mvebu_pinctrl_probe(pdev);
+}
+
+static int armada_39x_pinctrl_remove(struct platform_device *pdev)
+{
+	return mvebu_pinctrl_remove(pdev);
+}
+
+static struct platform_driver armada_39x_pinctrl_driver = {
+	.driver = {
+		.name = "armada-39x-pinctrl",
+		.of_match_table = of_match_ptr(armada_39x_pinctrl_of_match),
+	},
+	.probe = armada_39x_pinctrl_probe,
+	.remove = armada_39x_pinctrl_remove,
+};
+
+module_platform_driver(armada_39x_pinctrl_driver);
+
+MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>");
+MODULE_DESCRIPTION("Marvell Armada 39x pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 16/20] ARM: mvebu: add core support for Armada 39x

[Thomas Petazzoni]

This commit adds the core support for Armada 39x, which is quite
simple:

 - a new Kconfig option which selects the appropriate clock and
   pinctrl drivers as well as other common features (GIC, L2 cache,
   SMP, etc.)

 - a new DT_MACHINE_START which references the top-level compatible
   strings supported for the Marvell Armada 39x.

 - a new SMP enable-method. The mechanism to enable CPUs for Armada
   39x appears to be the same as Armada 38x. However, we do not want
   to use marvell,armada-380-smp in the Device Tree, in the case of
   the discovery of a subtle difference in the future, which would
   require changing the Device Tree. And the enable-method isn't a
   compatible string: you can't specify several values and expect a
   fallback on the second string if the first one isn't
   supported. Therefore, we simply declare the SMP enable method
   "marvell,armada-390-smp" as doing the same thing as the
   "marvell,armada-380-smp" one.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 arch/arm/mach-mvebu/Kconfig      | 14 ++++++++++++++
 arch/arm/mach-mvebu/board-v7.c   | 14 ++++++++++++++
 arch/arm/mach-mvebu/platsmp-a9.c |  2 ++
 3 files changed, 30 insertions(+)

diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index c1e4567..9747316 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -64,6 +64,20 @@ config MACH_ARMADA_38X
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Armada 380/385 SoC with device tree.
 
+config MACH_ARMADA_39X
+	bool "Marvell Armada 39x boards" if ARCH_MULTI_V7
+	select ARM_GIC
+	select ARMADA_39X_CLK
+	select CACHE_L2X0
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	select HAVE_SMP
+	select MACH_MVEBU_V7
+	select PINCTRL_ARMADA_39X
+	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Armada 39x SoC with device tree.
+
 config MACH_ARMADA_XP
 	bool "Marvell Armada XP boards" if ARCH_MULTI_V7
 	select ARMADA_XP_CLK
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index 31b66f2..afee908 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -232,3 +232,17 @@ DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)")
 	.restart	= mvebu_restart,
 	.dt_compat	= armada_38x_dt_compat,
 MACHINE_END
+
+static const char * const armada_39x_dt_compat[] __initconst = {
+	"marvell,armada390",
+	"marvell,armada398",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADA_39X_DT, "Marvell Armada 39x (Device Tree)")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.init_irq       = mvebu_init_irq,
+	.restart	= mvebu_restart,
+	.dt_compat	= armada_39x_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c
index 2ec1a42..df0a9cc 100644
--- a/arch/arm/mach-mvebu/platsmp-a9.c
+++ b/arch/arm/mach-mvebu/platsmp-a9.c
@@ -110,3 +110,5 @@ CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp",
 		      &mvebu_cortex_a9_smp_ops);
 CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp",
 		      &armada_38x_smp_ops);
+CPU_METHOD_OF_DECLARE(mvebu_armada_390_smp, "marvell,armada-390-smp",
+		      &armada_38x_smp_ops);
-- 
2.1.0

[PATCH v3 17/20] ARM: mvebu: add Device Tree files for Armada 39x SoC and board

[Thomas Petazzoni]

This commit adds the Device Tree files for the Armada 39x family of
processors, as well as one Armada 398 Development Board.

Like for other Marvell EBU families, a common armada-39x.dtsi contains
the description of the common features of all Armada 39x SoCs, while
armada-390.dtsi and armada-398.dtsi respectively describe the
specificities of those SoCs.

Finally, an armada-398-db.dts file is added to describe the Armada 398
Development Board itself.

So far, the following features are supported:

 * SMP: dual Cortex-A9
 * Basic ARM IPs: SCU, timer, GIC, L2 cache
 * Basic Marvell IPs: pin-muxing, clocks, system controller, MBus
   controller, MPIC interrupt controller, timer, CPU reset for SMP,
   PMSU.
 * I2C
 * SPI
 * SDHCI
 * XOR
 * NAND
 * UART
 * PCIe

Additional features will be supported in the future.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 arch/arm/boot/dts/Makefile          |   2 +
 arch/arm/boot/dts/armada-390.dtsi   |  57 ++++
 arch/arm/boot/dts/armada-398-db.dts | 153 +++++++++++
 arch/arm/boot/dts/armada-398.dtsi   |  60 +++++
 arch/arm/boot/dts/armada-39x.dtsi   | 508 ++++++++++++++++++++++++++++++++++++
 5 files changed, 780 insertions(+)
 create mode 100644 arch/arm/boot/dts/armada-390.dtsi
 create mode 100644 arch/arm/boot/dts/armada-398-db.dts
 create mode 100644 arch/arm/boot/dts/armada-398.dtsi
 create mode 100644 arch/arm/boot/dts/armada-39x.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1c776b8..c3130de 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -624,6 +624,8 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
 	armada-388-db.dtb \
 	armada-388-gp.dtb \
 	armada-388-rd.dtb
+dtb-$(CONFIG_MACH_ARMADA_39X) += \
+	armada-398-db.dtb
 dtb-$(CONFIG_MACH_ARMADA_XP) += \
 	armada-xp-axpwifiap.dtb \
 	armada-xp-db.dtb \
diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi
new file mode 100644
index 0000000..094e39c
--- /dev/null
+++ b/arch/arm/boot/dts/armada-390.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Device Tree Include file for Marvell Armada 390 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armada-39x.dtsi"
+
+/ {
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6920-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+		};
+};
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
new file mode 100644
index 0000000..bbf8375
--- /dev/null
+++ b/arch/arm/boot/dts/armada-398-db.dts
@@ -0,0 +1,153 @@
+/*
+ * Device Tree Include file for Marvell Armada 398 Development Board
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-398.dtsi"
+
+/ {
+	model = "Marvell Armada 398 Development Board";
+	compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10680 {
+				status = "okay";
+				pinctrl-0 = <&spi1_pins>;
+				pinctrl-names = "default";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "n25q128a13";
+					reg = <0>;
+					spi-max-frequency = <108000000>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0 0x400000>;
+					};
+
+					partition@400000 {
+						label = "Filesystem";
+						reg = <0x400000 0x1000000>;
+					};
+				};
+			};
+
+			i2c@11000 {
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				pinctrl-0 = <&uart0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			serial@12100 {
+				pinctrl-0 = <&uart1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			flash@d0000 {
+				status = "okay";
+				pinctrl-0 = <&nand_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <8>;
+				nand-ecc-step-size = <512>;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x800000>;
+				};
+				partition@800000 {
+					label = "Linux";
+					reg = <0x800000 0x800000>;
+				};
+				partition@1000000 {
+					label = "Filesystem";
+					reg = <0x1000000 0x3f000000>;
+				};
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi
new file mode 100644
index 0000000..fdc2591
--- /dev/null
+++ b/arch/arm/boot/dts/armada-398.dtsi
@@ -0,0 +1,60 @@
+/*
+ * Device Tree Include file for Marvell Armada 398 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armada-39x.dtsi"
+
+/ {
+	compatible = "marvell,armada398", "marvell,armada390";
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6928-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
new file mode 100644
index 0000000..0e85fc1
--- /dev/null
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -0,0 +1,508 @@
+/*
+ * Device Tree Include file for Marvell Armada 39x family of SoCs.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	model = "Marvell Armada 39x family SoC";
+	compatible = "marvell,armada390";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-390-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+			};
+
+			scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x100>;
+			};
+
+			timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@10680 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@11200 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11200 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@11300 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11300 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart2: serial@12200 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12200 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart3: serial@12300 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12300 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl@18000 {
+				i2c0_pins: i2c0-pins {
+					marvell,pins = "mpp2", "mpp3";
+					marvell,function = "i2c0";
+				};
+
+				uart0_pins: uart0-pins {
+					marvell,pins = "mpp0", "mpp1";
+					marvell,function = "ua0";
+				};
+
+				uart1_pins: uart1-pins {
+					marvell,pins = "mpp19", "mpp20";
+					marvell,function = "ua1";
+				};
+
+				spi1_pins: spi1-pins {
+					marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
+					marvell,function = "spi1";
+				};
+
+				nand_pins: nand-pins {
+					marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33",
+						       "mpp38", "mpp28", "mpp40", "mpp42",
+						       "mpp35", "mpp36", "mpp25", "mpp30",
+						       "mpp32";
+					marvell,function = "dev";
+				};
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-390-system-controller",
+					     "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-390-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			coreclk: mvebu-sar@18600 {
+				compatible = "marvell,armada-390-core-clock";
+				reg = <0x18600 0x04>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
+			};
+
+			mpic: interrupt-controller@20a00 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-380-timer",
+					     "marvell,armada-xp-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 2>, <&coreclk 5>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			pmsu@22000 {
+				compatible = "marvell,armada-390-pmsu",
+					     "marvell,armada-380-pmsu";
+				reg = <0x22000 0x1000>;
+			};
+
+			xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			flash@d0000 {
+				compatible = "marvell,armada370-nand";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coredivclk 0>;
+				status = "disabled";
+			};
+
+			sdhci@d8000 {
+				compatible = "marvell,armada-380-sdhci";
+				reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 17>;
+				mrvl,clk-delay-cycles = <0x1F>;
+				status = "disabled";
+			};
+
+			coredivclk: clock@e4250 {
+				compatible = "marvell,armada-390-corediv-clock",
+					     "marvell,armada-380-corediv-clock";
+				reg = <0xe4250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
+
+			/*
+			 * This port can be either x4 or x1. When
+			 * configured in x4 by the bootloader, then
+			 * pcie@4,0 is not available.
+			 */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			/*
+			 * x1 port only available when pcie@1,0 is
+			 * configured as a x1 port
+			 */
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+		};
+	};
+
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <2000000000>;
+		};
+	};
+};
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 18/20] Documentation: arm: update supported Marvell EBU processors

[Thomas Petazzoni]

Now that we support Armada 39x, let's add this family of SoC to the
Marvell documentation, and a reference to a link with more details
about those processors. Unfortunately, no datasheet is publicly
available at this time.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 Documentation/arm/Marvell/README | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README
index 1745379..18a775d 100644
--- a/Documentation/arm/Marvell/README
+++ b/Documentation/arm/Marvell/README
@@ -96,6 +96,11 @@ EBU Armada family
 	88F6820
 	88F6828
 
+  Armada 390/398 Flavors:
+	88F6920
+	88F6928
+    Product infos: http://www.marvell.com/embedded-processors/armada-39x/
+
   Armada XP Flavors:
         MV78230
         MV78260
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 19/20] ARM: mvebu: enable Armada 39x in mvebu_v7_defconfig

[Thomas Petazzoni]

Following the introduction of the Marvell Armada 39x support, let's
enabled it by default in mvebu_v7_defconfig.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 arch/arm/configs/mvebu_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig
index 73673e9..bb262f0 100644
--- a/arch/arm/configs/mvebu_v7_defconfig
+++ b/arch/arm/configs/mvebu_v7_defconfig
@@ -12,6 +12,7 @@ CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_375=y
 CONFIG_MACH_ARMADA_38X=y
+CONFIG_MACH_ARMADA_39X=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_MACH_DOVE=y
 CONFIG_PCI=y
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 20/20] ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig

[Thomas Petazzoni]

Following the introduction of the Marvell Armada 39x support, let's
enable this support by default in multi_v7_defconfig.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: <arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e8a4c95..32d5399 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -16,6 +16,7 @@ CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_375=y
 CONFIG_MACH_ARMADA_38X=y
+CONFIG_MACH_ARMADA_39X=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_MACH_DOVE=y
 CONFIG_ARCH_BCM=y
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 00/20] ARM: mvebu: Armada 39x basic support, and preparatory cleanups

[Gregory CLEMENT]

Hi Thomas,

On 03/03/2015 15:40, Thomas Petazzoni wrote:
> Hello,
> 
> This is the third version of the patch series adding Armada 39x basic
> support.
> 
> This set of patches add basic support for a new family of Marvell EBU
> processors: the Armada 39x. They are based on Cortex-A9 (like Armada
> 375 and 38x) and the most important new feature is probably the
> addition of 10 GbE support.
> 
> See http://www.marvell.com/embedded-processors/armada-39x/ for a basic
> introduction.
> 
> Note that this web page talks about an Armada 395 and Armada 398, but
> so far the technical documentation we have been given access to only
> describes Armada 390 and Armada 398, so this series supports only
> Armada 390 and Armada 398 so far. Support for Armada 395 might be
> added in the future, once we get access to the appropriate technical
> details.
> 
> Changes v2 -> v3:
> 
>  - Rebased on top of v4.0-rc1
> 
>  - Add support for the L2 cache
> 
>  - Added Acked-by from Gregory Clement on
> 
>    ARM: mvebu: add __initconst specifiers on DT_MACHINE_START dt_compat tables
>    ARM: mvebu: fix usb@ unit address on Armada 38x to match register address
>    ARM: mvebu: add missing UART alias on Armada 38x
>    devicetree: bindings: add DT binding for the Marvell Armada 39x SoC family
> 
>  - Renamed 'ARM: mvebu: add missing UART alias on Armada 38x' to 'ARM:
>    mvebu: add missing UART labels on Armada 38x'.
> 
>  - Added a patch 'ARM: mvebu: add UART labels to Armada 375'.
> 
>  - Change 'ARM: mvebu: add stdout-path to all armada-*.dts' to go
>    further and eliminate completely /chosen/bootargs. This removes the
>    non-desired 'earlyprintk' argument, and since console= was the only
>    remaining kernel parameter, using stdout-path makes more
>    sense. Requested by Rob Herring and Mark Rutland.
> 
>  - Dropped the patch "ARM: mvebu: use IRQ macros to define the SDHCI
>    interrupt on Armada 38x" from the series, since Gregory Clement
>    already submitted it as part of a different series.
> 
>  - Added patches 'ARM: mvebu: enable Armada 39x in mvebu_v7_defconfig'
>    and 'ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig'
>    to update mvebu_v7_defconfig and multi_v7_defconfig so that they
>    enable Marvell Armada 39x by default. Suggested by Gregory Clement.
> 
>  - Fix the unit address of the MPIC interrupt controller, in both the
>    newly added Armada 39x support, as well as in the existing Armada
>    370, 375, 38x and XP support. Suggested by Gregory Clement.
> 
> Changes v1 -> v2:
> 
>  - At the SoC level, add the description of SPI controller 0 and 1,
>    NAND flash controller, SDHCI controller, Core Divider Clock (needed
>    by the NAND flash controller), the main PLL clock (needed by the
>    Core Divider Clock) and the XOR engines.
> 
>  - At the board level, add the description of the SPI flash connected
>    to SPI bus 1, which contains the bootloader, and the description of
>    the NAND flash.
> 
>  - Fix space vs. tab.
> 
>  - Use __initconst when defining the dt_compat table for Armada
>    39x. Suggested by Stephen Boyd.
> 
>  - Fix typo in commit log of "ARM: mvebu: add core support for Armada
>    39x", noticed by Maxime Ripard.
> 
>  - Remove earlyprintk from /chosen/bootargs. Suggested by Andrew Lunn.
> 
>  - Add aliases for uart[0-3]. Suggested by Andrew Lunn.
> 
>  - Add /chosen/stdout-path to Armada 398 DB DT. Suggested by Andrew
>    Lunn.
> 
>  - Move pinctrl configurations at the SoC level. Suggested by Andrew
>    Lunn.
> 
>  - Add several preparation/cleanup patches not related to Armada 39x
>    directly, but whose topics were found while working on Armada 39x
>    support:
> 
>      - Add __initconst to all dt_compat table in mach-mvebu.
>      - Fixup usb@ unit address on Armada 38x
>      - Add stdout-path to all armada-*.dts
>      - Use GIC and IRQ macros in SDHCI definition of Armada 38x
>      - Add missing UART alias on Armada 38x
> 
> Thanks!
> 
> Thomas
> 
> Thomas Petazzoni (20):
>   ARM: mvebu: add __initconst specifiers on DT_MACHINE_START dt_compat
>     tables
>   ARM: mvebu: fix usb@ unit address on Armada 38x to match register
>     address
>   ARM: mvebu: add missing UART labels on Armada 38x
>   ARM: mvebu: add UART labels to Armada 375
>   ARM: mvebu: remove aliases for Ethernet devices on Armada
>     370/375/38x/XP
>   ARM: mvebu: add serial port aliases on Armada 370/375/38x/XP
>   ARM: mvebu: use stdout-path in all armada-*.dts
>   ARM: mvebu: fix unit address of MPIC nodes
>   devicetree: bindings: add DT binding for the Marvell Armada 39x SoC
>     family
>   devicetree: bindings: update DT bindings for Marvell EBU clock support
>   devicetree: bindings: add Device Tree bindings for Armada 39x
>     pin-muxing controller
>   devicetree: bindings: add new SMP enable method for Marvell Armada 39x
>   clk: mvebu: extend common code to allow an optional refclk
>   clk: mvebu: add Marvell Armada 39x driver
>   pinctrl: mvebu: add pinctrl driver for Marvell Armada 39x
>   ARM: mvebu: add core support for Armada 39x
>   ARM: mvebu: add Device Tree files for Armada 39x SoC and board
>   Documentation: arm: update supported Marvell EBU processors
>   ARM: mvebu: enable Armada 39x in mvebu_v7_defconfig
>   ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig

Patches 1 applied to mvebu/cleanup
Patches 2 to 8 and patch 17 applied to mvebu/dt
Patches 9,12,16 and 18 applied to mvebu/soc
Patch 19 applied to mvebu/defconfig

and

Patches 10,13 and 14 applied to mvebu/clk as requested by Mike.

I had to amend the patch "ARM: mvebu: fix unit address of MPIC nodes"
by removing the armada-38x related part which was already applied by the
patch "ARM: mvebu: Fix MPIC unit address".

Patch 20 should be directly taken by the arm-soc maintainer.


Thanks,

Gregory



> 
>  Documentation/arm/Marvell/README                   |   5 +
>  .../devicetree/bindings/arm/armada-39x.txt         |  20 +
>  Documentation/devicetree/bindings/arm/cpus.txt     |   1 +
>  .../devicetree/bindings/clock/mvebu-core-clock.txt |   9 +
>  .../bindings/clock/mvebu-gated-clock.txt           |  15 +-
>  .../pinctrl/marvell,armada-39x-pinctrl.txt         |  78 ++++
>  arch/arm/boot/dts/Makefile                         |   2 +
>  arch/arm/boot/dts/armada-370-db.dts                |   2 +-
>  arch/arm/boot/dts/armada-370-mirabox.dts           |   2 +-
>  arch/arm/boot/dts/armada-370-netgear-rn102.dts     |   2 +-
>  arch/arm/boot/dts/armada-370-netgear-rn104.dts     |   2 +-
>  arch/arm/boot/dts/armada-370-rd.dts                |   2 +-
>  arch/arm/boot/dts/armada-370-synology-ds213j.dts   |   3 +-
>  arch/arm/boot/dts/armada-370-xp.dtsi               |   6 +-
>  arch/arm/boot/dts/armada-370.dtsi                  |   2 +-
>  arch/arm/boot/dts/armada-375-db.dts                |   2 +-
>  arch/arm/boot/dts/armada-375.dtsi                  |  10 +-
>  arch/arm/boot/dts/armada-385-db-ap.dts             |   3 +-
>  arch/arm/boot/dts/armada-388-db.dts                |   4 +-
>  arch/arm/boot/dts/armada-388-gp.dts                |   5 +-
>  arch/arm/boot/dts/armada-388-rd.dts                |   2 +-
>  arch/arm/boot/dts/armada-38x.dtsi                  |  11 +-
>  .../dts/{armada-xp-matrix.dts => armada-390.dtsi}  |  71 +---
>  .../dts/{armada-388-db.dts => armada-398-db.dts}   | 111 ++---
>  .../dts/{armada-xp-matrix.dts => armada-398.dtsi}  |  70 +---
>  .../boot/dts/{armada-375.dtsi => armada-39x.dtsi}  | 446 ++++++++-------------
>  arch/arm/boot/dts/armada-xp-axpwifiap.dts          |   2 +-
>  arch/arm/boot/dts/armada-xp-db.dts                 |   2 +-
>  arch/arm/boot/dts/armada-xp-gp.dts                 |   2 +-
>  arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts    |   3 +-
>  arch/arm/boot/dts/armada-xp-matrix.dts             |   2 +-
>  arch/arm/boot/dts/armada-xp-mv78260.dtsi           |   1 -
>  arch/arm/boot/dts/armada-xp-mv78460.dtsi           |   1 -
>  arch/arm/boot/dts/armada-xp-netgear-rn2120.dts     |   2 +-
>  arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts   |   2 +-
>  arch/arm/boot/dts/armada-xp-synology-ds414.dts     |   3 +-
>  arch/arm/boot/dts/armada-xp.dtsi                   |   5 +-
>  arch/arm/configs/multi_v7_defconfig                |   1 +
>  arch/arm/configs/mvebu_v7_defconfig                |   1 +
>  arch/arm/mach-mvebu/Kconfig                        |  14 +
>  arch/arm/mach-mvebu/board-v7.c                     |  20 +-
>  arch/arm/mach-mvebu/dove.c                         |   2 +-
>  arch/arm/mach-mvebu/kirkwood.c                     |   2 +-
>  arch/arm/mach-mvebu/platsmp-a9.c                   |   2 +
>  drivers/clk/mvebu/Kconfig                          |   4 +
>  drivers/clk/mvebu/Makefile                         |   1 +
>  drivers/clk/mvebu/armada-39x.c                     | 156 +++++++
>  drivers/clk/mvebu/common.c                         |  17 +
>  drivers/clk/mvebu/common.h                         |   1 +
>  drivers/pinctrl/mvebu/Kconfig                      |   4 +
>  drivers/pinctrl/mvebu/Makefile                     |   1 +
>  drivers/pinctrl/mvebu/pinctrl-armada-39x.c         | 432 ++++++++++++++++++++
>  52 files changed, 1045 insertions(+), 524 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/armada-39x.txt
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt
>  copy arch/arm/boot/dts/{armada-xp-matrix.dts => armada-390.dtsi} (61%)
>  copy arch/arm/boot/dts/{armada-388-db.dts => armada-398-db.dts} (70%)
>  copy arch/arm/boot/dts/{armada-xp-matrix.dts => armada-398.dtsi} (61%)
>  copy arch/arm/boot/dts/{armada-375.dtsi => armada-39x.dtsi} (55%)
>  create mode 100644 drivers/clk/mvebu/armada-39x.c
>  create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-39x.c
> 


-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Re: [PATCH v3 00/20] ARM: mvebu: Armada 39x basic support, and preparatory cleanups

[Thomas Petazzoni]

Gregory,

On Wed, 04 Mar 2015 16:05:41 +0100, Gregory CLEMENT wrote:

> Patches 1 applied to mvebu/cleanup
> Patches 2 to 8 and patch 17 applied to mvebu/dt
> Patches 9,12,16 and 18 applied to mvebu/soc
> Patch 19 applied to mvebu/defconfig
> 
> and
> 
> Patches 10,13 and 14 applied to mvebu/clk as requested by Mike.
> 
> I had to amend the patch "ARM: mvebu: fix unit address of MPIC nodes"
> by removing the armada-38x related part which was already applied by the
> patch "ARM: mvebu: Fix MPIC unit address".
> 
> Patch 20 should be directly taken by the arm-soc maintainer.

Thanks!

So this leaves only:

  [PATCH v3 11/20] devicetree: bindings: add Device Tree bindings for Armada 39x pin-muxing controller
  [PATCH v3 15/20] pinctrl: mvebu: add pinctrl driver for Marvell Armada 39x

to be applied, right? Patch 15/20 has been applied by Linus Walleij
already, but from the v1 of the series. I also asked him to merge PATCH
v3 11/20.

With this done, and PATCH v2 20/20 merged by the arm-soc maintainers, I
guess we should be all set with this patch series.

Thanks again!

Best regards,

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Re: [PATCH v3 11/20] devicetree: bindings: add Device Tree bindings for Armada 39x pin-muxing controller

[Linus Walleij]

On Tue, Mar 3, 2015 at 3:41 PM, Thomas Petazzoni
<thomas.petazzoni@free-electrons.com> wrote:

> This commit adds the Device Tree binding documentation to describe the
> pin-muxing controller of the Marvell Armada 39x processors. Two
> variants are supported for the moment: the 88F6920 (Armada 390) and
> 88F6928 (Armada 398).
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Patch applied to the pinctrl tree.

Yours,
Linus Walleij

Re: [PATCH v3 15/20] pinctrl: mvebu: add pinctrl driver for Marvell Armada 39x

[Linus Walleij]

On Tue, Mar 3, 2015 at 3:41 PM, Thomas Petazzoni
<thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> wrote:

> This commit adds a new pinctrl driver for the Marvell Armada 39x
> family of processors, which hooks into the existing infrastructure to
> support pin-muxing on Marvell EBU processors. Two variants of the
> Armada 39x are supported: 88F6920 (Armada 390) and 88F6928 (Armada
> 398), which have a few differences in the available functions for
> certain pins.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>

Already applied this some time ago...

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 20/20] ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig

[Olof Johansson]

On Tue, Mar 03, 2015 at 03:41:15PM +0100, Thomas Petazzoni wrote:
> Following the introduction of the Marvell Armada 39x support, let's
> enable this support by default in multi_v7_defconfig.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Cc: <arm@kernel.org>

Thanks, applied.


-Olof