From: Lorenzo Pieralisi <lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org>
To: Howard Chen <howard.chen-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Matthias Brugger
<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <Pawel.Moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <Mark.Rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Catalin Marinas <Catalin.Marinas-5wv7dgnIgG8@public.gmane.org>,
Will Deacon <Will.Deacon-5wv7dgnIgG8@public.gmane.org>,
Eddie Huang <eddie.huang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
"srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org"
<srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: Re: [PATCH v2] ARM: dts: mt8173: support arm64 cpuidle-dt
Date: Wed, 8 Apr 2015 11:54:43 +0100 [thread overview]
Message-ID: <20150408105443.GA23642@red-moon> (raw)
In-Reply-To: <1428393905-32166-1-git-send-email-howard.chen-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
On Tue, Apr 07, 2015 at 09:05:05AM +0100, Howard Chen wrote:
> This patch adds an idle-states node to describe the mt8173 idle states and
> also adds references to the idle-states node in all CPU nodes.
>
> Signed-off-by: Howard Chen <howard.chen-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Is copying me in too much effort to ask ?
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index 8554ec3..0d31a34 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -48,6 +48,8 @@
> device_type = "cpu";
> compatible = "arm,cortex-a53";
> reg = <0x000>;
> + enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
Cluster idle state vanished between v1 and v2.
?
> };
>
> cpu1: cpu@1 {
> @@ -55,6 +57,7 @@
> compatible = "arm,cortex-a53";
> reg = <0x001>;
> enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> };
>
> cpu2: cpu@100 {
> @@ -62,6 +65,7 @@
> compatible = "arm,cortex-a57";
> reg = <0x100>;
> enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> };
>
> cpu3: cpu@101 {
> @@ -69,6 +73,19 @@
> compatible = "arm,cortex-a57";
> reg = <0x101>;
> enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> + };
> +
> + idle-states {
> + entry-method = "arm,psci";
> +
> + CPU_SLEEP_0: cpu-sleep-0 {
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x0010000>;
> + entry-latency-us = <639>;
> + exit-latency-us = <328>;
> + min-residency-us = <1088>;
> + };
> };
> };
Is the arch timer still running when you enter this state ?
Apart from these remarks the patch seems fine, I wonder whether we should
merge these changes into the kernel instead of keeping these changes in
firmware for specific kernel configurations.
Lorenzo
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2015-04-08 10:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-07 8:05 [PATCH v2] ARM: dts: mt8173: support arm64 cpuidle-dt Howard Chen
[not found] ` <1428393905-32166-1-git-send-email-howard.chen-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-04-08 10:54 ` Lorenzo Pieralisi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150408105443.GA23642@red-moon \
--to=lorenzo.pieralisi-5wv7dgnigg8@public.gmane.org \
--cc=Catalin.Marinas-5wv7dgnIgG8@public.gmane.org \
--cc=Mark.Rutland-5wv7dgnIgG8@public.gmane.org \
--cc=Pawel.Moll-5wv7dgnIgG8@public.gmane.org \
--cc=Will.Deacon-5wv7dgnIgG8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=eddie.huang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=howard.chen-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).