[parent not found: <1428645330-1043-1-git-send-email-human.hwang-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>]
* [PATCH v5 01/12] drm/exynos: add Exynos5433 decon driver
[not found] ` <1428645330-1043-1-git-send-email-human.hwang-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
@ 2015-04-10 5:55 ` Hyungwon Hwang
[not found] ` <1428645330-1043-2-git-send-email-human.hwang-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-04-10 5:55 ` [PATCH v5 02/12] of: add helper for getting endpoint node of specific identifiers Hyungwon Hwang
2015-04-10 5:55 ` [PATCH v5 10/12] drm/exynos: dsi: add support for MIC driver as a bridge Hyungwon Hwang
2 siblings, 1 reply; 16+ messages in thread
From: Hyungwon Hwang @ 2015-04-10 5:55 UTC (permalink / raw)
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
devicetree-u79uwXL29TY76Z2rM5mHXA,
inki.dae-Sze3O3UU22JBDgjK7y7TUQ, daniel-rLtY4a/8tF1rovVCs/uTlw
Cc: sw0312.kim-Sze3O3UU22JBDgjK7y7TUQ,
jy0922.shim-Sze3O3UU22JBDgjK7y7TUQ,
dh09.lee-Sze3O3UU22JBDgjK7y7TUQ, cw00.choi-Sze3O3UU22JBDgjK7y7TUQ,
Hyungwon Hwang
From: Joonyoung Shim <jy0922.shim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
DECON(Display and Enhancement Controller) is new IP replacing FIMD in
Exynos5433. This patch adds Exynos5433 decon driver.
Signed-off-by: Joonyoung Shim <jy0922.shim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Hyungwon Hwang <human.hwang-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
Changes for v2:
- change file names and variable names of decon to represnt exynos5433 instead
of exynos to distinguish them from exynos7 decon
Changes for v3:
- fail fast when the proper image format is not set
- remove unnecessary checking code
- add and modify the function to make DPMS work well
Changes for v4:
- rebased to exynos-drm-next with the clean-up patchset by Gustavo Padovan.
Changes for v5:
- None
.../devicetree/bindings/video/exynos5433-decon.txt | 65 +++
drivers/gpu/drm/exynos/Kconfig | 6 +
drivers/gpu/drm/exynos/Makefile | 1 +
drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 617 +++++++++++++++++++++
drivers/gpu/drm/exynos/exynos_drm_drv.c | 3 +
drivers/gpu/drm/exynos/exynos_drm_drv.h | 1 +
include/video/exynos5433_decon.h | 163 ++++++
7 files changed, 856 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/exynos5433-decon.txt
create mode 100644 drivers/gpu/drm/exynos/exynos5433_drm_decon.c
create mode 100644 include/video/exynos5433_decon.h
diff --git a/Documentation/devicetree/bindings/video/exynos5433-decon.txt b/Documentation/devicetree/bindings/video/exynos5433-decon.txt
new file mode 100644
index 0000000..377afbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/exynos5433-decon.txt
@@ -0,0 +1,65 @@
+Device-Tree bindings for Samsung Exynos SoC display controller (DECON)
+
+DECON (Display and Enhancement Controller) is the Display Controller for the
+Exynos series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be "samsung,exynos5433-decon";
+- reg: physical base address and length of the DECON registers set.
+- interrupts: should contain a list of all DECON IP block interrupts in the
+ order: VSYNC, LCD_SYSTEM. The interrupt specifier format
+ depends on the interrupt controller used.
+- interrupt-names: should contain the interrupt names: "vsync", "lcd_sys"
+ in the same order as they were listed in the interrupts
+ property.
+- clocks: must include clock specifiers corresponding to entries in the
+ clock-names property.
+- clock-names: list of clock names sorted in the same order as the clocks
+ property. Must contain "aclk_decon", "aclk_smmu_decon0x",
+ "aclk_xiu_decon0x", "pclk_smmu_decon0x", clk_decon_vclk",
+ "sclk_decon_eclk"
+- ports: contains a port which is connected to mic node. address-cells and
+ size-cells must 1 and 0, respectively.
+- port: contains an endpoint node which is connected to the endpoint in the mic
+ node. The reg value muset be 0.
+- i80-if-timings: specify whether the panel which is connected to decon uses
+ i80 lcd interface or mipi video interface. This node contains
+ no timing information as that of fimd does. Because there is
+ no register in decon to specify i80 interface timing value,
+ it is not needed, but make it remain to use same kind of node
+ in fimd and exynos7 decon.
+
+Example:
+SoC specific DT entry:
+decon: decon@13800000 {
+ compatible = "samsung,exynos5433-decon";
+ reg = <0x13800000 0x2104>;
+ clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+ <&cmu_disp CLK_ACLK_XIU_DECON0X>,
+ <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+ <&cmu_disp CLK_SCLK_DECON_VCLK>,
+ <&cmu_disp CLK_SCLK_DECON_ECLK>;
+ clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x",
+ "pclk_smmu_decon0x", "sclk_decon_vclk", "sclk_decon_eclk";
+ interrupt-names = "vsync", "lcd_sys";
+ interrupts = <0 202 0>, <0 203 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ decon_to_mic: endpoint {
+ remote-endpoint = <&mic_to_decon>;
+ };
+ };
+ };
+};
+
+Board specific DT entry:
+&decon {
+ i80-if-timings {
+ };
+};
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index 0a67803..dd6ae21 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -24,6 +24,12 @@ config DRM_EXYNOS_FIMD
help
Choose this option if you want to use Exynos FIMD for DRM.
+config DRM_EXYNOS5433_DECON
+ bool "Exynos5433 DRM DECON"
+ depends on DRM_EXYNOS
+ help
+ Choose this option if you want to use Exynos5433 DECON for DRM.
+
config DRM_EXYNOS7_DECON
bool "Exynos DRM DECON"
depends on DRM_EXYNOS
diff --git a/drivers/gpu/drm/exynos/Makefile b/drivers/gpu/drm/exynos/Makefile
index cc90679..fbd084d 100644
--- a/drivers/gpu/drm/exynos/Makefile
+++ b/drivers/gpu/drm/exynos/Makefile
@@ -10,6 +10,7 @@ exynosdrm-y := exynos_drm_drv.o exynos_drm_encoder.o \
exynosdrm-$(CONFIG_DRM_EXYNOS_IOMMU) += exynos_drm_iommu.o
exynosdrm-$(CONFIG_DRM_EXYNOS_FIMD) += exynos_drm_fimd.o
+exynosdrm-$(CONFIG_DRM_EXYNOS5433_DECON) += exynos5433_drm_decon.o
exynosdrm-$(CONFIG_DRM_EXYNOS7_DECON) += exynos7_drm_decon.o
exynosdrm-$(CONFIG_DRM_EXYNOS_DPI) += exynos_drm_dpi.o
exynosdrm-$(CONFIG_DRM_EXYNOS_DSI) += exynos_drm_dsi.o
diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
new file mode 100644
index 0000000..4cc2842
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
@@ -0,0 +1,617 @@
+/* drivers/gpu/drm/exynos5433_drm_decon.c
+ *
+ * Copyright (C) 2015 Samsung Electronics Co.Ltd
+ * Authors:
+ * Joonyoung Shim <jy0922.shim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
+ * Hyungwon Hwang <human.hwang-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundationr
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/of_gpio.h>
+
+#include <video/exynos5433_decon.h>
+
+#include "exynos_drm_drv.h"
+#include "exynos_drm_crtc.h"
+#include "exynos_drm_plane.h"
+
+#define WINDOWS_NR 3
+#define MIN_FB_WIDTH_FOR_16WORD_BURST 128
+
+struct decon_context {
+ struct device *dev;
+ struct drm_device *drm_dev;
+ struct exynos_drm_crtc *crtc;
+ struct exynos_drm_plane planes[WINDOWS_NR];
+ void __iomem *addr;
+ struct clk *clks[6];
+ unsigned int default_win;
+ int pipe;
+ bool suspended;
+
+#define BIT_CLKS_ENABLED 0
+#define BIT_IRQS_ENABLED 1
+ unsigned long enabled;
+ bool i80_if;
+ atomic_t win_updated;
+};
+
+static const char * const decon_clks_name[] = {
+ "aclk_decon",
+ "aclk_smmu_decon0x",
+ "aclk_xiu_decon0x",
+ "pclk_smmu_decon0x",
+ "sclk_decon_vclk",
+ "sclk_decon_eclk",
+};
+
+static int decon_enable_vblank(struct exynos_drm_crtc *crtc)
+{
+ struct decon_context *ctx = crtc->ctx;
+ u32 val;
+
+ if (ctx->suspended)
+ return -EPERM;
+
+ if (!test_and_set_bit(BIT_IRQS_ENABLED, &ctx->enabled)) {
+ val = VIDINTCON0_INTEN;
+ if (ctx->i80_if)
+ val |= VIDINTCON0_FRAMEDONE;
+ else
+ val |= VIDINTCON0_INTFRMEN;
+
+ writel(val, ctx->addr + DECON_VIDINTCON0);
+ }
+
+ return 0;
+}
+
+static void decon_disable_vblank(struct exynos_drm_crtc *crtc)
+{
+ struct decon_context *ctx = crtc->ctx;
+
+ if (ctx->suspended)
+ return;
+
+ if (test_and_clear_bit(BIT_IRQS_ENABLED, &ctx->enabled))
+ writel(0, ctx->addr + DECON_VIDINTCON0);
+}
+
+static void decon_commit(struct exynos_drm_crtc *crtc)
+{
+ struct decon_context *ctx = crtc->ctx;
+ struct drm_display_mode *mode = &crtc->base.mode;
+ u32 val;
+
+ /* enable clock gate */
+ val = CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F;
+ writel(val, ctx->addr + DECON_CMU);
+
+ /* lcd on and use command if */
+ val = VIDOUT_LCD_ON;
+ if (ctx->i80_if)
+ val |= VIDOUT_COMMAND_IF;
+ else
+ val |= VIDOUT_RGB_IF;
+ writel(val, ctx->addr + DECON_VIDOUTCON0);
+
+ val = VIDTCON2_LINEVAL(mode->vdisplay - 1) |
+ VIDTCON2_HOZVAL(mode->hdisplay - 1);
+ writel(val, ctx->addr + DECON_VIDTCON2);
+
+ if (!ctx->i80_if) {
+ val = VIDTCON00_VBPD_F(
+ mode->crtc_vtotal - mode->crtc_vsync_end) |
+ VIDTCON00_VFPD_F(
+ mode->crtc_vsync_start - mode->crtc_vdisplay);
+ writel(val, ctx->addr + DECON_VIDTCON00);
+
+ val = VIDTCON01_VSPW_F(
+ mode->crtc_vsync_end - mode->crtc_vsync_start);
+ writel(val, ctx->addr + DECON_VIDTCON01);
+
+ val = VIDTCON10_HBPD_F(
+ mode->crtc_htotal - mode->crtc_hsync_end) |
+ VIDTCON10_HFPD_F(
+ mode->crtc_hsync_start - mode->crtc_hdisplay);
+ writel(val, ctx->addr + DECON_VIDTCON10);
+
+ val = VIDTCON11_HSPW_F(
+ mode->crtc_hsync_end - mode->crtc_hsync_start);
+ writel(val, ctx->addr + DECON_VIDTCON11);
+ }
+
+ /* sw trigger enable */
+ val = TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | TRIGCON_TE_AUTO_MASK |
+ TRIGCON_SWTRIGEN;
+ writel(val, ctx->addr + DECON_TRIGCON);
+
+ /* enable output and display signal */
+ val = VIDCON0_ENVID | VIDCON0_ENVID_F;
+ writel(val, ctx->addr + DECON_VIDCON0);
+}
+
+#define COORDINATE_X(x) (((x) & 0xfff) << 12)
+#define COORDINATE_Y(x) ((x) & 0xfff)
+#define OFFSIZE(x) (((x) & 0x3fff) << 14)
+#define PAGEWIDTH(x) ((x) & 0x3fff)
+
+static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win)
+{
+ struct exynos_drm_plane *plane = &ctx->planes[win];
+ unsigned long val;
+
+ val = readl(ctx->addr + DECON_WINCONx(win));
+ val &= ~WINCONx_BPPMODE_MASK;
+
+ switch (plane->pixel_format) {
+ case DRM_FORMAT_XRGB1555:
+ val |= WINCONx_BPPMODE_16BPP_I1555;
+ val |= WINCONx_HAWSWP_F;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ case DRM_FORMAT_RGB565:
+ val |= WINCONx_BPPMODE_16BPP_565;
+ val |= WINCONx_HAWSWP_F;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ case DRM_FORMAT_XRGB8888:
+ val |= WINCONx_BPPMODE_24BPP_888;
+ val |= WINCONx_WSWP_F;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ case DRM_FORMAT_ARGB8888:
+ val |= WINCONx_BPPMODE_32BPP_A8888;
+ val |= WINCONx_WSWP_F | WINCONx_BLD_PIX_F | WINCONx_ALPHA_SEL_F;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ default:
+ DRM_ERROR("Proper pixel format is not set\n");
+ return;
+ }
+
+ DRM_DEBUG_KMS("bpp = %u\n", plane->bpp);
+
+ /*
+ * In case of exynos, setting dma-burst to 16Word causes permanent
+ * tearing for very small buffers, e.g. cursor buffer. Burst Mode
+ * switching which is based on plane size is not recommended as
+ * plane size varies a lot towards the end of the screen and rapid
+ * movement causes unstable DMA which results into iommu crash/tear.
+ */
+
+ if (plane->fb_width < MIN_FB_WIDTH_FOR_16WORD_BURST) {
+ val &= ~WINCONx_BURSTLEN_MASK;
+ val |= WINCONx_BURSTLEN_8WORD;
+ }
+
+ writel(val, ctx->addr + DECON_WINCONx(win));
+}
+
+static void decon_shadow_protect_win(struct decon_context *ctx, int win,
+ bool protect)
+{
+ u32 val;
+
+ val = readl(ctx->addr + DECON_SHADOWCON);
+
+ if (protect)
+ val |= SHADOWCON_Wx_PROTECT(win);
+ else
+ val &= ~SHADOWCON_Wx_PROTECT(win);
+
+ writel(val, ctx->addr + DECON_SHADOWCON);
+}
+
+static void decon_win_commit(struct exynos_drm_crtc *crtc, unsigned int win)
+{
+ struct decon_context *ctx = crtc->ctx;
+ struct exynos_drm_plane *plane;
+ u32 val;
+
+ if (win < 0 || win >= WINDOWS_NR)
+ return;
+
+ plane = &ctx->planes[win];
+
+ /* If suspended, enable this on resume */
+ if (ctx->suspended) {
+ plane->resume = true;
+ return;
+ }
+
+ decon_shadow_protect_win(ctx, win, true);
+
+ val = COORDINATE_X(plane->crtc_x) | COORDINATE_Y(plane->crtc_y);
+ writel(val, ctx->addr + DECON_VIDOSDxA(win));
+
+ val = COORDINATE_X(plane->crtc_x + plane->crtc_width - 1) |
+ COORDINATE_Y(plane->crtc_y + plane->crtc_height - 1);
+ writel(val, ctx->addr + DECON_VIDOSDxB(win));
+
+ val = VIDOSD_Wx_ALPHA_R_F(0x0) | VIDOSD_Wx_ALPHA_G_F(0x0) |
+ VIDOSD_Wx_ALPHA_B_F(0x0);
+ writel(val, ctx->addr + DECON_VIDOSDxC(win));
+
+ val = VIDOSD_Wx_ALPHA_R_F(0x0) | VIDOSD_Wx_ALPHA_G_F(0x0) |
+ VIDOSD_Wx_ALPHA_B_F(0x0);
+ writel(val, ctx->addr + DECON_VIDOSDxD(win));
+
+ writel(plane->dma_addr[0], ctx->addr + DECON_VIDW0xADD0B0(win));
+
+ val = plane->dma_addr[0] + plane->pitch * plane->crtc_height;
+ writel(val, ctx->addr + DECON_VIDW0xADD1B0(win));
+
+ val = OFFSIZE(plane->pitch - plane->crtc_width * (plane->bpp >> 3))
+ | PAGEWIDTH(plane->crtc_width * (plane->bpp >> 3));
+ writel(val, ctx->addr + DECON_VIDW0xADD2(win));
+
+ decon_win_set_pixfmt(ctx, win);
+
+ /* window enable */
+ val = readl(ctx->addr + DECON_WINCONx(win));
+ val |= WINCONx_ENWIN_F;
+ writel(val, ctx->addr + DECON_WINCONx(win));
+
+ decon_shadow_protect_win(ctx, win, false);
+
+ /* standalone update */
+ val = readl(ctx->addr + DECON_UPDATE);
+ val |= STANDALONE_UPDATE_F;
+ writel(val, ctx->addr + DECON_UPDATE);
+
+ if (ctx->i80_if)
+ atomic_set(&ctx->win_updated, 1);
+
+ plane->enabled = true;
+}
+
+static void decon_win_disable(struct exynos_drm_crtc *crtc, unsigned int win)
+{
+ struct decon_context *ctx = crtc->ctx;
+ struct exynos_drm_plane *plane;
+ u32 val;
+
+ if (win < 0 || win >= WINDOWS_NR)
+ return;
+
+ plane = &ctx->planes[win];
+
+ if (ctx->suspended) {
+ plane->resume = false;
+ return;
+ }
+
+ decon_shadow_protect_win(ctx, win, true);
+
+ /* window disable */
+ val = readl(ctx->addr + DECON_WINCONx(win));
+ val &= ~WINCONx_ENWIN_F;
+ writel(val, ctx->addr + DECON_WINCONx(win));
+
+ decon_shadow_protect_win(ctx, win, false);
+
+ /* standalone update */
+ val = readl(ctx->addr + DECON_UPDATE);
+ val |= STANDALONE_UPDATE_F;
+ writel(val, ctx->addr + DECON_UPDATE);
+
+ plane->enabled = false;
+}
+
+static void decon_window_suspend(struct decon_context *ctx)
+{
+ struct exynos_drm_plane *plane;
+ int i;
+
+ for (i = 0; i < WINDOWS_NR; i++) {
+ plane = &ctx->planes[i];
+ plane->resume = plane->enabled;
+ if (plane->enabled)
+ decon_win_disable(ctx->crtc, i);
+ }
+}
+
+static void decon_window_resume(struct decon_context *ctx)
+{
+ struct exynos_drm_plane *plane;
+ int i;
+
+ for (i = 0; i < WINDOWS_NR; i++) {
+ plane = &ctx->planes[i];
+ plane->enabled = plane->resume;
+ plane->resume = false;
+ }
+}
+
+static void decon_apply(struct decon_context *ctx)
+{
+ struct exynos_drm_plane *plane;
+ int i;
+
+ for (i = 0; i < WINDOWS_NR; i++) {
+ plane = &ctx->planes[i];
+ if (plane->enabled)
+ decon_win_commit(ctx->crtc, i);
+ else
+ decon_win_disable(ctx->crtc, i);
+ }
+
+ decon_commit(ctx->crtc);
+}
+
+static void decon_dpms_on(struct decon_context *ctx)
+{
+ int ret;
+ int i;
+
+ if (!ctx->suspended)
+ return;
+
+ ctx->suspended = false;
+
+ for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) {
+ ret = clk_prepare_enable(ctx->clks[i]);
+ if (ret < 0)
+ goto err;
+ }
+
+ set_bit(BIT_CLKS_ENABLED, &ctx->enabled);
+
+ decon_window_resume(ctx);
+ decon_apply(ctx);
+
+ return;
+err:
+ while (--i >= 0)
+ clk_disable_unprepare(ctx->clks[i]);
+
+ ctx->suspended = true;
+}
+
+static void decon_dpms_off(struct decon_context *ctx)
+{
+ int i;
+
+ if (ctx->suspended)
+ return;
+
+ clear_bit(BIT_CLKS_ENABLED, &ctx->enabled);
+ decon_window_suspend(ctx);
+
+ for (i = ARRAY_SIZE(decon_clks_name) - 1; i >= 0; i--)
+ clk_disable_unprepare(ctx->clks[i]);
+
+ ctx->suspended = true;
+}
+
+static void decon_dpms(struct exynos_drm_crtc *crtc, int mode)
+{
+ struct decon_context *ctx = crtc->ctx;
+
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ decon_dpms_on(ctx);
+ break;
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ case DRM_MODE_DPMS_OFF:
+ decon_dpms_off(ctx);
+ break;
+ default:
+ DRM_DEBUG_KMS("unspecified mode %d\n", mode);
+ break;
+ }
+}
+
+void decon_te_irq_handler(struct exynos_drm_crtc *crtc)
+{
+ struct decon_context *ctx = crtc->ctx;
+ u32 val;
+
+ if (!test_bit(BIT_CLKS_ENABLED, &ctx->enabled))
+ return;
+
+ if (atomic_add_unless(&ctx->win_updated, -1, 0)) {
+ /* trigger */
+ val = readl(ctx->addr + DECON_TRIGCON);
+ val |= TRIGCON_SWTRIGCMD;
+ writel(val, ctx->addr + DECON_TRIGCON);
+ }
+}
+
+static struct exynos_drm_crtc_ops decon_crtc_ops = {
+ .dpms = decon_dpms,
+ .enable_vblank = decon_enable_vblank,
+ .disable_vblank = decon_disable_vblank,
+ .commit = decon_commit,
+ .win_commit = decon_win_commit,
+ .win_disable = decon_win_disable,
+ .te_handler = decon_te_irq_handler,
+};
+
+static int decon_bind(struct device *dev, struct device *master, void *data)
+{
+ struct decon_context *ctx = dev_get_drvdata(dev);
+ struct drm_device *drm_dev = data;
+ struct exynos_drm_private *priv = drm_dev->dev_private;
+ enum drm_plane_type type;
+ unsigned int zpos;
+ int ret;
+
+ ctx->drm_dev = drm_dev;
+ ctx->pipe = priv->pipe++;
+
+ for (zpos = 0; zpos < WINDOWS_NR; zpos++) {
+ type = (zpos == ctx->default_win) ? DRM_PLANE_TYPE_PRIMARY :
+ DRM_PLANE_TYPE_OVERLAY;
+ ret = exynos_plane_init(drm_dev, &ctx->planes[zpos],
+ 1 << ctx->pipe, type, zpos);
+ if (ret)
+ return ret;
+ }
+
+ ctx->crtc = exynos_drm_crtc_create(drm_dev,
+ &ctx->planes[ctx->default_win].base, ctx->pipe,
+ EXYNOS_DISPLAY_TYPE_LCD, &decon_crtc_ops, ctx);
+ if (IS_ERR(ctx->crtc)) {
+ priv->pipe--;
+ return PTR_ERR(ctx->crtc);
+ }
+
+ return 0;
+}
+
+static void decon_unbind(struct device *dev, struct device *master, void *data)
+{
+ struct decon_context *ctx = dev_get_drvdata(dev);
+
+ decon_dpms(ctx->crtc, DRM_MODE_DPMS_OFF);
+}
+
+static const struct component_ops decon_component_ops = {
+ .bind = decon_bind,
+ .unbind = decon_unbind,
+};
+
+static irqreturn_t decon_vsync_irq_handler(int irq, void *dev_id)
+{
+ struct decon_context *ctx = dev_id;
+ u32 val;
+
+ if (!test_bit(BIT_CLKS_ENABLED, &ctx->enabled))
+ goto out;
+
+ val = readl(ctx->addr + DECON_VIDINTCON1);
+ if (val & VIDINTCON1_INTFRMPEND) {
+ drm_handle_vblank(ctx->drm_dev, ctx->pipe);
+
+ /* clear */
+ writel(VIDINTCON1_INTFRMPEND, ctx->addr + DECON_VIDINTCON1);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t decon_lcd_sys_irq_handler(int irq, void *dev_id)
+{
+ struct decon_context *ctx = dev_id;
+ u32 val;
+
+ if (!test_bit(BIT_CLKS_ENABLED, &ctx->enabled))
+ goto out;
+
+ val = readl(ctx->addr + DECON_VIDINTCON1);
+ if (val & VIDINTCON1_INTFRMDONEPEND) {
+ exynos_drm_crtc_finish_pageflip(ctx->drm_dev, ctx->pipe);
+
+ /* clear */
+ writel(VIDINTCON1_INTFRMDONEPEND,
+ ctx->addr + DECON_VIDINTCON1);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+static int exynos5433_decon_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct decon_context *ctx;
+ struct resource *res;
+ int ret;
+ int i;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->default_win = 0;
+ ctx->suspended = true;
+ ctx->dev = dev;
+ if (of_get_child_by_name(dev->of_node, "i80-if-timings"))
+ ctx->i80_if = true;
+
+ for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) {
+ struct clk *clk;
+
+ clk = devm_clk_get(ctx->dev, decon_clks_name[i]);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ ctx->clks[i] = clk;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "cannot find IO resource\n");
+ return -ENXIO;
+ }
+
+ ctx->addr = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ctx->addr)) {
+ dev_err(dev, "ioremap failed\n");
+ return PTR_ERR(ctx->addr);
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
+ ctx->i80_if ? "lcd_sys" : "vsync");
+ if (!res) {
+ dev_err(dev, "cannot find IRQ resource\n");
+ return -ENXIO;
+ }
+
+ ret = devm_request_irq(dev, res->start, ctx->i80_if ?
+ decon_lcd_sys_irq_handler : decon_vsync_irq_handler, 0,
+ "drm_decon", ctx);
+ if (ret < 0) {
+ dev_err(dev, "lcd_sys irq request failed\n");
+ return ret;
+ }
+
+ ret = exynos_drm_component_add(dev, EXYNOS_DEVICE_TYPE_CRTC,
+ EXYNOS_DISPLAY_TYPE_LCD);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, ctx);
+
+ ret = component_add(dev, &decon_component_ops);
+ if (ret < 0) {
+ exynos_drm_component_del(dev, EXYNOS_DEVICE_TYPE_CRTC);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int exynos5433_decon_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &decon_component_ops);
+ exynos_drm_component_del(&pdev->dev, EXYNOS_DEVICE_TYPE_CRTC);
+
+ return 0;
+}
+
+static const struct of_device_id exynos5433_decon_driver_dt_match[] = {
+ { .compatible = "samsung,exynos5433-decon" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, exynos5433_decon_driver_dt_match);
+
+struct platform_driver exynos5433_decon_driver = {
+ .probe = exynos5433_decon_probe,
+ .remove = exynos5433_decon_remove,
+ .driver = {
+ .name = "exynos5433-decon",
+ .owner = THIS_MODULE,
+ .of_match_table = exynos5433_decon_driver_dt_match,
+ },
+};
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index 8ac4652..78ef497 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -529,6 +529,9 @@ static struct platform_driver *const exynos_drm_kms_drivers[] = {
#ifdef CONFIG_DRM_EXYNOS_FIMD
&fimd_driver,
#endif
+#ifdef CONFIG_DRM_EXYNOS5433_DECON
+ &exynos5433_decon_driver,
+#endif
#ifdef CONFIG_DRM_EXYNOS7_DECON
&decon_driver,
#endif
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h
index e12ecb5..147737a 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
@@ -342,6 +342,7 @@ void exynos_drm_component_del(struct device *dev,
enum exynos_drm_device_type dev_type);
extern struct platform_driver fimd_driver;
+extern struct platform_driver exynos5433_decon_driver;
extern struct platform_driver decon_driver;
extern struct platform_driver dp_driver;
extern struct platform_driver dsi_driver;
diff --git a/include/video/exynos5433_decon.h b/include/video/exynos5433_decon.h
new file mode 100644
index 0000000..9e7f851
--- /dev/null
+++ b/include/video/exynos5433_decon.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundationr
+ */
+
+#ifndef EXYNOS_REGS_DECON_H
+#define EXYNOS_REGS_DECON_H
+
+/* Exynos543X DECON */
+#define DECON_VIDCON0 0x0000
+#define DECON_VIDOUTCON0 0x0010
+#define DECON_WINCONx(n) (0x0020 + ((n) * 4))
+#define DECON_VIDOSDxH(n) (0x0080 + ((n) * 4))
+#define DECON_SHADOWCON 0x00A0
+#define DECON_VIDOSDxA(n) (0x00B0 + ((n) * 0x20))
+#define DECON_VIDOSDxB(n) (0x00B4 + ((n) * 0x20))
+#define DECON_VIDOSDxC(n) (0x00B8 + ((n) * 0x20))
+#define DECON_VIDOSDxD(n) (0x00BC + ((n) * 0x20))
+#define DECON_VIDOSDxE(n) (0x00C0 + ((n) * 0x20))
+#define DECON_VIDW0xADD0B0(n) (0x0150 + ((n) * 0x10))
+#define DECON_VIDW0xADD0B1(n) (0x0154 + ((n) * 0x10))
+#define DECON_VIDW0xADD0B2(n) (0x0158 + ((n) * 0x10))
+#define DECON_VIDW0xADD1B0(n) (0x01A0 + ((n) * 0x10))
+#define DECON_VIDW0xADD1B1(n) (0x01A4 + ((n) * 0x10))
+#define DECON_VIDW0xADD1B2(n) (0x01A8 + ((n) * 0x10))
+#define DECON_VIDW0xADD2(n) (0x0200 + ((n) * 4))
+#define DECON_LOCALxSIZE(n) (0x0214 + ((n) * 4))
+#define DECON_VIDINTCON0 0x0220
+#define DECON_VIDINTCON1 0x0224
+#define DECON_WxKEYCON0(n) (0x0230 + ((n - 1) * 8))
+#define DECON_WxKEYCON1(n) (0x0234 + ((n - 1) * 8))
+#define DECON_WxKEYALPHA(n) (0x0250 + ((n - 1) * 4))
+#define DECON_WINxMAP(n) (0x0270 + ((n) * 4))
+#define DECON_QOSLUT07_00 0x02C0
+#define DECON_QOSLUT15_08 0x02C4
+#define DECON_QOSCTRL 0x02C8
+#define DECON_BLENDERQx(n) (0x0300 + ((n - 1) * 4))
+#define DECON_BLENDCON 0x0310
+#define DECON_OPE_VIDW0xADD0(n) (0x0400 + ((n) * 4))
+#define DECON_OPE_VIDW0xADD1(n) (0x0414 + ((n) * 4))
+#define DECON_FRAMEFIFO_REG7 0x051C
+#define DECON_FRAMEFIFO_REG8 0x0520
+#define DECON_FRAMEFIFO_STATUS 0x0524
+#define DECON_CMU 0x1404
+#define DECON_UPDATE 0x1410
+#define DECON_UPDATE_SCHEME 0x1438
+#define DECON_VIDCON1 0x2000
+#define DECON_VIDCON2 0x2004
+#define DECON_VIDCON3 0x2008
+#define DECON_VIDCON4 0x200C
+#define DECON_VIDTCON2 0x2028
+#define DECON_FRAME_SIZE 0x2038
+#define DECON_LINECNT_OP_THRESHOLD 0x203C
+#define DECON_TRIGCON 0x2040
+#define DECON_TRIGSKIP 0x2050
+#define DECON_CRCRDATA 0x20B0
+#define DECON_CRCCTRL 0x20B4
+
+/* Exynos5430 DECON */
+#define DECON_VIDTCON0 0x2020
+#define DECON_VIDTCON1 0x2024
+
+/* Exynos5433 DECON */
+#define DECON_VIDTCON00 0x2010
+#define DECON_VIDTCON01 0x2014
+#define DECON_VIDTCON10 0x2018
+#define DECON_VIDTCON11 0x201C
+
+/* Exynos543X DECON Internal */
+#define DECON_W013DSTREOCON 0x0320
+#define DECON_W233DSTREOCON 0x0324
+#define DECON_FRAMEFIFO_REG0 0x0500
+#define DECON_ENHANCER_CTRL 0x2100
+
+/* Exynos543X DECON TV */
+#define DECON_VCLKCON0 0x0014
+#define DECON_VIDINTCON2 0x0228
+#define DECON_VIDINTCON3 0x022C
+
+/* VIDCON0 */
+#define VIDCON0_ENVID (1 << 1)
+#define VIDCON0_ENVID_F (1 << 0)
+
+/* VIDOUTCON0 */
+#define VIDOUT_LCD_ON (1 << 24)
+#define VIDOUT_IF_F_MASK (0x3 << 20)
+#define VIDOUT_RGB_IF (0x0 << 20)
+#define VIDOUT_COMMAND_IF (0x2 << 20)
+
+/* WINCONx */
+#define WINCONx_HAWSWP_F (1 << 16)
+#define WINCONx_WSWP_F (1 << 15)
+#define WINCONx_BURSTLEN_MASK (0x3 << 10)
+#define WINCONx_BURSTLEN_16WORD (0x0 << 10)
+#define WINCONx_BURSTLEN_8WORD (0x1 << 10)
+#define WINCONx_BURSTLEN_4WORD (0x2 << 10)
+#define WINCONx_BLD_PIX_F (1 << 6)
+#define WINCONx_BPPMODE_MASK (0xf << 2)
+#define WINCONx_BPPMODE_16BPP_565 (0x5 << 2)
+#define WINCONx_BPPMODE_16BPP_A1555 (0x6 << 2)
+#define WINCONx_BPPMODE_16BPP_I1555 (0x7 << 2)
+#define WINCONx_BPPMODE_24BPP_888 (0xb << 2)
+#define WINCONx_BPPMODE_24BPP_A1887 (0xc << 2)
+#define WINCONx_BPPMODE_25BPP_A1888 (0xd << 2)
+#define WINCONx_BPPMODE_32BPP_A8888 (0xd << 2)
+#define WINCONx_BPPMODE_16BPP_A4444 (0xe << 2)
+#define WINCONx_ALPHA_SEL_F (1 << 1)
+#define WINCONx_ENWIN_F (1 << 0)
+
+/* SHADOWCON */
+#define SHADOWCON_Wx_PROTECT(n) (1 << (10 + (n)))
+
+/* VIDOSDxD */
+#define VIDOSD_Wx_ALPHA_R_F(n) (((n) & 0xff) << 16)
+#define VIDOSD_Wx_ALPHA_G_F(n) (((n) & 0xff) << 8)
+#define VIDOSD_Wx_ALPHA_B_F(n) (((n) & 0xff) << 0)
+
+/* VIDINTCON0 */
+#define VIDINTCON0_FRAMEDONE (1 << 17)
+#define VIDINTCON0_INTFRMEN (1 << 12)
+#define VIDINTCON0_INTEN (1 << 0)
+
+/* VIDINTCON1 */
+#define VIDINTCON1_INTFRMDONEPEND (1 << 2)
+#define VIDINTCON1_INTFRMPEND (1 << 1)
+#define VIDINTCON1_INTFIFOPEND (1 << 0)
+
+/* DECON_CMU */
+#define CMU_CLKGAGE_MODE_SFR_F (1 << 1)
+#define CMU_CLKGAGE_MODE_MEM_F (1 << 0)
+
+/* DECON_UPDATE */
+#define STANDALONE_UPDATE_F (1 << 0)
+
+/* DECON_VIDTCON00 */
+#define VIDTCON00_VBPD_F(x) (((x) & 0xfff) << 16)
+#define VIDTCON00_VFPD_F(x) ((x) & 0xfff)
+
+/* DECON_VIDTCON01 */
+#define VIDTCON01_VSPW_F(x) (((x) & 0xfff) << 16)
+
+/* DECON_VIDTCON10 */
+#define VIDTCON10_HBPD_F(x) (((x) & 0xfff) << 16)
+#define VIDTCON10_HFPD_F(x) ((x) & 0xfff)
+
+/* DECON_VIDTCON11 */
+#define VIDTCON11_HSPW_F(x) (((x) & 0xfff) << 16)
+
+/* DECON_VIDTCON2 */
+#define VIDTCON2_LINEVAL(x) (((x) & 0xfff) << 16)
+#define VIDTCON2_HOZVAL(x) ((x) & 0xfff)
+
+/* TRIGCON */
+#define TRIGCON_TRIGEN_PER_F (1 << 31)
+#define TRIGCON_TRIGEN_F (1 << 30)
+#define TRIGCON_TE_AUTO_MASK (1 << 29)
+#define TRIGCON_SWTRIGCMD (1 << 1)
+#define TRIGCON_SWTRIGEN (1 << 0)
+
+#endif /* EXYNOS_REGS_DECON_H */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v5 02/12] of: add helper for getting endpoint node of specific identifiers
[not found] ` <1428645330-1043-1-git-send-email-human.hwang-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-04-10 5:55 ` [PATCH v5 01/12] drm/exynos: add Exynos5433 decon driver Hyungwon Hwang
@ 2015-04-10 5:55 ` Hyungwon Hwang
2015-04-10 5:55 ` [PATCH v5 10/12] drm/exynos: dsi: add support for MIC driver as a bridge Hyungwon Hwang
2 siblings, 0 replies; 16+ messages in thread
From: Hyungwon Hwang @ 2015-04-10 5:55 UTC (permalink / raw)
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
devicetree-u79uwXL29TY76Z2rM5mHXA,
inki.dae-Sze3O3UU22JBDgjK7y7TUQ, daniel-rLtY4a/8tF1rovVCs/uTlw
Cc: sw0312.kim-Sze3O3UU22JBDgjK7y7TUQ,
jy0922.shim-Sze3O3UU22JBDgjK7y7TUQ,
dh09.lee-Sze3O3UU22JBDgjK7y7TUQ, cw00.choi-Sze3O3UU22JBDgjK7y7TUQ,
Hyungwon Hwang
When there are multiple ports or multiple endpoints in a port, they have to be
distinguished by the value of reg property. It is common. The drivers can get
the specific endpoint in the specific port via this function. Now the drivers
have to implement this code in themselves or have to force the order of dt nodes
to get the right node.
Signed-off-by: Hyungwon Hwang <human.hwang-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Acked-by: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
Changes for v2:
- None
Changes for v3:
- None
Changes for v4:
- None
Changes for v5:
- None
drivers/of/base.c | 33 +++++++++++++++++++++++++++++++++
include/linux/of_graph.h | 8 ++++++++
2 files changed, 41 insertions(+)
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 8f165b1..37bc8e0 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -2158,6 +2158,39 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
EXPORT_SYMBOL(of_graph_get_next_endpoint);
/**
+ * of_graph_get_endpoint_by_regs() - get endpoint node of specific identifiers
+ * @parent: pointer to the parent device node
+ * @port_reg: identifier (value of reg property) of the parent port node
+ * @reg: identifier (value of reg property) of the endpoint node
+ *
+ * Return: An 'endpoint' node pointer which is identified by reg and at the same
+ * is the child of a port node identified by port_reg. reg and port_reg are
+ * ignored when they are -1.
+ */
+struct device_node *of_graph_get_endpoint_by_regs(
+ const struct device_node *parent, int port_reg, int reg)
+{
+ struct of_endpoint endpoint;
+ struct device_node *node, *prev_node = NULL;
+
+ while (1) {
+ node = of_graph_get_next_endpoint(parent, prev_node);
+ of_node_put(prev_node);
+ if (!node)
+ break;
+
+ of_graph_parse_endpoint(node, &endpoint);
+ if (((port_reg == -1) || (endpoint.port == port_reg)) &&
+ ((reg == -1) || (endpoint.id == reg)))
+ return node;
+
+ prev_node = node;
+ }
+
+ return NULL;
+}
+
+/**
* of_graph_get_remote_port_parent() - get remote port's parent node
* @node: pointer to a local endpoint device_node
*
diff --git a/include/linux/of_graph.h b/include/linux/of_graph.h
index befef42..e859eb7 100644
--- a/include/linux/of_graph.h
+++ b/include/linux/of_graph.h
@@ -31,6 +31,8 @@ int of_graph_parse_endpoint(const struct device_node *node,
struct of_endpoint *endpoint);
struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
struct device_node *previous);
+struct device_node *of_graph_get_endpoint_by_regs(
+ const struct device_node *parent, int port_reg, int reg);
struct device_node *of_graph_get_remote_port_parent(
const struct device_node *node);
struct device_node *of_graph_get_remote_port(const struct device_node *node);
@@ -49,6 +51,12 @@ static inline struct device_node *of_graph_get_next_endpoint(
return NULL;
}
+struct device_node *of_graph_get_endpoint_by_regs(
+ const struct device_node *parent, int port_reg, int reg)
+{
+ return NULL;
+}
+
static inline struct device_node *of_graph_get_remote_port_parent(
const struct device_node *node)
{
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v5 10/12] drm/exynos: dsi: add support for MIC driver as a bridge
[not found] ` <1428645330-1043-1-git-send-email-human.hwang-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-04-10 5:55 ` [PATCH v5 01/12] drm/exynos: add Exynos5433 decon driver Hyungwon Hwang
2015-04-10 5:55 ` [PATCH v5 02/12] of: add helper for getting endpoint node of specific identifiers Hyungwon Hwang
@ 2015-04-10 5:55 ` Hyungwon Hwang
2 siblings, 0 replies; 16+ messages in thread
From: Hyungwon Hwang @ 2015-04-10 5:55 UTC (permalink / raw)
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
devicetree-u79uwXL29TY76Z2rM5mHXA,
inki.dae-Sze3O3UU22JBDgjK7y7TUQ, daniel-rLtY4a/8tF1rovVCs/uTlw
Cc: sw0312.kim-Sze3O3UU22JBDgjK7y7TUQ,
jy0922.shim-Sze3O3UU22JBDgjK7y7TUQ,
dh09.lee-Sze3O3UU22JBDgjK7y7TUQ, cw00.choi-Sze3O3UU22JBDgjK7y7TUQ,
Hyungwon Hwang
MIC must be initilized by MIPI DSI when it is being bound.
Signed-off-by: Hyungwon Hwang <human.hwang-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
Changes for v2:
- None
Changes for v3:
- None
Changes for v4:
- None
Changes for v5:
- None
.../devicetree/bindings/video/exynos_dsim.txt | 23 ++++++++++++++++++---
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 24 ++++++++++++++++++++++
2 files changed, 44 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/video/exynos_dsim.txt b/Documentation/devicetree/bindings/video/exynos_dsim.txt
index 11ccac9..0be0362 100644
--- a/Documentation/devicetree/bindings/video/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dsim.txt
@@ -32,10 +32,19 @@ Video interfaces:
Device node can contain video interface port nodes according to [2].
The following are properties specific to those nodes:
- port node:
- - reg: (required) can be 0 for input RGB/I80 port or 1 for DSI port;
+ port node inbound:
+ - reg: (required) must be 0.
+ port node outbound:
+ - reg: (required) must be 1.
- endpoint node of DSI port (reg = 1):
+ endpoint node connected from mic node (reg = 0):
+ - remote-endpoint: specifies the endpoint in mic node. This node is required
+ for Exynos5433 mipi dsi. So mic can access to panel node
+ thoughout this dsi node.
+ endpoint node connected to panel node (reg = 1):
+ - remote-endpoint: specifies the endpoint in panel node. This node is
+ required in all kinds of exynos mipi dsi to represent
+ the connection between mipi dsi and panel.
- samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
mode
- samsung,esc-clock-frequency: specifies DSI frequency in escape mode
@@ -74,7 +83,15 @@ Example:
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ decon_to_mic: endpoint {
+ remote-endpoint = <&mic_to_decon>;
+ };
+ };
+
port@1 {
+ reg = <1>;
dsi_ep: endpoint {
reg = <0>;
samsung,burst-clock-frequency = <500000000>;
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index ddcb77e..d5a3baf 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -20,6 +20,7 @@
#include <linux/irq.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
+#include <linux/of_graph.h>
#include <linux/phy/phy.h>
#include <linux/regulator/consumer.h>
#include <linux/component.h>
@@ -286,6 +287,7 @@ struct exynos_dsi {
struct list_head transfer_list;
struct exynos_dsi_driver_data *driver_data;
+ struct device_node *bridge_node;
};
#define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host)
@@ -1776,7 +1778,22 @@ static int exynos_dsi_parse_dt(struct exynos_dsi *dsi)
ret = exynos_dsi_of_read_u32(ep, "samsung,esc-clock-frequency",
&dsi->esc_clk_rate);
+ if (ret < 0)
+ goto end;
+
+ of_node_put(ep);
+
+ ep = of_graph_get_next_endpoint(node, NULL);
+ if (!ep) {
+ ret = -ENXIO;
+ goto end;
+ }
+ dsi->bridge_node = of_graph_get_remote_port_parent(ep);
+ if (!dsi->bridge_node) {
+ ret = -ENXIO;
+ goto end;
+ }
end:
of_node_put(ep);
@@ -1789,6 +1806,7 @@ static int exynos_dsi_bind(struct device *dev, struct device *master,
struct exynos_drm_display *display = dev_get_drvdata(dev);
struct exynos_dsi *dsi = display_to_dsi(display);
struct drm_device *drm_dev = data;
+ struct drm_bridge *bridge;
int ret;
ret = exynos_drm_create_enc_conn(drm_dev, display);
@@ -1798,6 +1816,12 @@ static int exynos_dsi_bind(struct device *dev, struct device *master,
return ret;
}
+ bridge = of_drm_find_bridge(dsi->bridge_node);
+ if (bridge) {
+ display->encoder->bridge = bridge;
+ drm_bridge_attach(drm_dev, bridge);
+ }
+
return mipi_dsi_host_register(&dsi->dsi_host);
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v5 03/12] drm/exynos: mic: add MIC driver
2015-04-10 5:55 [PATCH v5 00/12] Add drivers for Exynos5433 display Hyungwon Hwang
[not found] ` <1428645330-1043-1-git-send-email-human.hwang-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
@ 2015-04-10 5:55 ` Hyungwon Hwang
2015-04-10 5:55 ` [PATCH v5 04/12] drm/exynos: dsi: rename pll_clk to sclk_clk Hyungwon Hwang
` (7 subsequent siblings)
9 siblings, 0 replies; 16+ messages in thread
From: Hyungwon Hwang @ 2015-04-10 5:55 UTC (permalink / raw)
To: dri-devel, devicetree, inki.dae, daniel
Cc: dh09.lee, sw0312.kim, Hyungwon Hwang, cw00.choi
MIC(Mobile image compressor) is newly added IP in Exynos5433. MIC
resides between decon and mipi dsim, and compresses frame data by 50%.
With dsi, not display port, to send frame data to the panel, the
bandwidth is not enough. That is why this compressor is introduced.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
---
Changes for v2:
- make mic driver to be registered by exynos drm driver instead as a module
driver
- change the description of mic driver in documentation
- add module author at the top of the source file removing MODULE_OWNER,
MODULE_DESCRIPTION, MODULE_LICENSE
Changes for v3:
- move if statement out of function, so that the function is not called
unnecessarily
- Make it use syscon framework for controlling system register
Changes for v4:
- None
Changes for v5:
- None
.../devicetree/bindings/video/exynos-mic.txt | 51 +++
drivers/gpu/drm/exynos/Kconfig | 6 +
drivers/gpu/drm/exynos/Makefile | 1 +
drivers/gpu/drm/exynos/exynos_drm_drv.c | 3 +
drivers/gpu/drm/exynos/exynos_drm_drv.h | 1 +
drivers/gpu/drm/exynos/exynos_drm_mic.c | 490 +++++++++++++++++++++
6 files changed, 552 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/exynos-mic.txt
create mode 100644 drivers/gpu/drm/exynos/exynos_drm_mic.c
diff --git a/Documentation/devicetree/bindings/video/exynos-mic.txt b/Documentation/devicetree/bindings/video/exynos-mic.txt
new file mode 100644
index 0000000..0fba2ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/exynos-mic.txt
@@ -0,0 +1,51 @@
+Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC)
+
+MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is
+not capable to transfer high resoltuion frame data as decon can send. MIC
+solves this problem by compressing the frame data by 1/2 before it is
+transferred through mipi dsi. The compressed frame data must be uncompressed in
+the panel PCB.
+
+Required properties:
+- compatible: value should be "samsung,exynos5433-mic".
+- reg: physical base address and length of the MIC registers set and system
+ register of mic.
+- clocks: must include clock specifiers corresponding to entries in the
+ clock-names property.
+- clock-names: list of clock names sorted in the same order as the clocks
+ property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0".
+- samsung,disp-syscon: the reference node for syscon for DISP block.
+- ports: contains a port which is connected to decon node and dsi node.
+ address-cells and size-cells must 1 and 0, respectively.
+- port: contains an endpoint node which is connected to the endpoint in the
+ decon node or dsi node. The reg value must be 0 and 1 respectively.
+
+Example:
+SoC specific DT entry:
+mic: mic@13930000 {
+ compatible = "samsung,exynos5433-mic";
+ reg = <0x13930000 0x48>;
+ clocks = <&cmu_disp CLK_PCLK_MIC0>,
+ <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+ clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
+ samsung,disp-syscon = <&syscon_disp>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mic_to_decon: endpoint {
+ remote-endpoint = <&decon_to_mic>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mic_to_dsi: endpoint {
+ remote-endpoint = <&dsi_to_mic>;
+ };
+ };
+ };
+};
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index dd6ae21..3f649ab 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -103,3 +103,9 @@ config DRM_EXYNOS_GSC
depends on DRM_EXYNOS_IPP && ARCH_EXYNOS5 && !ARCH_MULTIPLATFORM
help
Choose this option if you want to use Exynos GSC for DRM.
+
+config DRM_EXYNOS_MIC
+ bool "Exynos DRM MIC"
+ depends on (DRM_EXYNOS && DRM_EXYNOS5433_DECON)
+ help
+ Choose this option if you want to use Exynos MIC for DRM.
diff --git a/drivers/gpu/drm/exynos/Makefile b/drivers/gpu/drm/exynos/Makefile
index fbd084d..7de0b10 100644
--- a/drivers/gpu/drm/exynos/Makefile
+++ b/drivers/gpu/drm/exynos/Makefile
@@ -22,5 +22,6 @@ exynosdrm-$(CONFIG_DRM_EXYNOS_IPP) += exynos_drm_ipp.o
exynosdrm-$(CONFIG_DRM_EXYNOS_FIMC) += exynos_drm_fimc.o
exynosdrm-$(CONFIG_DRM_EXYNOS_ROTATOR) += exynos_drm_rotator.o
exynosdrm-$(CONFIG_DRM_EXYNOS_GSC) += exynos_drm_gsc.o
+exynosdrm-$(CONFIG_DRM_EXYNOS_MIC) += exynos_drm_mic.o
obj-$(CONFIG_DRM_EXYNOS) += exynosdrm.o
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index 78ef497..105fc1a 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -535,6 +535,9 @@ static struct platform_driver *const exynos_drm_kms_drivers[] = {
#ifdef CONFIG_DRM_EXYNOS7_DECON
&decon_driver,
#endif
+#ifdef CONFIG_DRM_EXYNOS_MIC
+ &mic_driver,
+#endif
#ifdef CONFIG_DRM_EXYNOS_DP
&dp_driver,
#endif
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h
index 147737a..4569847 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
@@ -355,4 +355,5 @@ extern struct platform_driver fimc_driver;
extern struct platform_driver rotator_driver;
extern struct platform_driver gsc_driver;
extern struct platform_driver ipp_driver;
+extern struct platform_driver mic_driver;
#endif
diff --git a/drivers/gpu/drm/exynos/exynos_drm_mic.c b/drivers/gpu/drm/exynos/exynos_drm_mic.c
new file mode 100644
index 0000000..8994eab
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_mic.c
@@ -0,0 +1,490 @@
+/*
+ * Copyright (C) 2015 Samsung Electronics Co.Ltd
+ * Authors:
+ * Hyungwon Hwang <human.hwang@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundationr
+ */
+
+#include <linux/platform_device.h>
+#include <video/of_videomode.h>
+#include <linux/of_address.h>
+#include <video/videomode.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/clk.h>
+#include <drm/drmP.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+/* Sysreg registers for MIC */
+#define DSD_CFG_MUX 0x1004
+#define MIC0_RGB_MUX (1 << 0)
+#define MIC0_I80_MUX (1 << 1)
+#define MIC0_ON_MUX (1 << 5)
+
+/* MIC registers */
+#define MIC_OP 0x0
+#define MIC_IP_VER 0x0004
+#define MIC_V_TIMING_0 0x0008
+#define MIC_V_TIMING_1 0x000C
+#define MIC_IMG_SIZE 0x0010
+#define MIC_INPUT_TIMING_0 0x0014
+#define MIC_INPUT_TIMING_1 0x0018
+#define MIC_2D_OUTPUT_TIMING_0 0x001C
+#define MIC_2D_OUTPUT_TIMING_1 0x0020
+#define MIC_2D_OUTPUT_TIMING_2 0x0024
+#define MIC_3D_OUTPUT_TIMING_0 0x0028
+#define MIC_3D_OUTPUT_TIMING_1 0x002C
+#define MIC_3D_OUTPUT_TIMING_2 0x0030
+#define MIC_CORE_PARA_0 0x0034
+#define MIC_CORE_PARA_1 0x0038
+#define MIC_CTC_CTRL 0x0040
+#define MIC_RD_DATA 0x0044
+
+#define MIC_UPD_REG (1 << 31)
+#define MIC_ON_REG (1 << 30)
+#define MIC_TD_ON_REG (1 << 29)
+#define MIC_BS_CHG_OUT (1 << 16)
+#define MIC_VIDEO_TYPE(x) (((x) & 0xf) << 12)
+#define MIC_PSR_EN (1 << 5)
+#define MIC_SW_RST (1 << 4)
+#define MIC_ALL_RST (1 << 3)
+#define MIC_CORE_VER_CONTROL (1 << 2)
+#define MIC_MODE_SEL_COMMAND_MODE (1 << 1)
+#define MIC_MODE_SEL_MASK (1 << 1)
+#define MIC_CORE_EN (1 << 0)
+
+#define MIC_V_PULSE_WIDTH(x) (((x) & 0x3fff) << 16)
+#define MIC_V_PERIOD_LINE(x) ((x) & 0x3fff)
+
+#define MIC_VBP_SIZE(x) (((x) & 0x3fff) << 16)
+#define MIC_VFP_SIZE(x) ((x) & 0x3fff)
+
+#define MIC_IMG_V_SIZE(x) (((x) & 0x3fff) << 16)
+#define MIC_IMG_H_SIZE(x) ((x) & 0x3fff)
+
+#define MIC_H_PULSE_WIDTH_IN(x) (((x) & 0x3fff) << 16)
+#define MIC_H_PERIOD_PIXEL_IN(x) ((x) & 0x3fff)
+
+#define MIC_HBP_SIZE_IN(x) (((x) & 0x3fff) << 16)
+#define MIC_HFP_SIZE_IN(x) ((x) & 0x3fff)
+
+#define MIC_H_PULSE_WIDTH_2D(x) (((x) & 0x3fff) << 16)
+#define MIC_H_PERIOD_PIXEL_2D(x) ((x) & 0x3fff)
+
+#define MIC_HBP_SIZE_2D(x) (((x) & 0x3fff) << 16)
+#define MIC_HFP_SIZE_2D(x) ((x) & 0x3fff)
+
+#define MIC_BS_SIZE_2D(x) ((x) & 0x3fff)
+
+enum {
+ ENDPOINT_DECON_NODE,
+ ENDPOINT_DSI_NODE,
+ NUM_ENDPOINTS
+};
+
+static char *clk_names[] = { "pclk_mic0", "sclk_rgb_vclk_to_mic0" };
+#define NUM_CLKS ARRAY_SIZE(clk_names)
+static DEFINE_MUTEX(mic_mutex);
+
+struct exynos_mic {
+ struct device *dev;
+ void __iomem *reg;
+ struct regmap *sysreg;
+ struct clk *clks[NUM_CLKS];
+
+ bool i80_mode;
+ struct videomode vm;
+ struct drm_encoder *encoder;
+ struct drm_bridge bridge;
+
+ bool enabled;
+};
+
+static void mic_set_path(struct exynos_mic *mic, bool enable)
+{
+ int ret;
+ unsigned int val;
+
+ ret = regmap_read(mic->sysreg, DSD_CFG_MUX, &val);
+ if (ret) {
+ DRM_ERROR("mic: Failed to read system register\n");
+ return;
+ }
+
+ if (enable) {
+ if (mic->i80_mode)
+ val |= MIC0_I80_MUX;
+ else
+ val |= MIC0_RGB_MUX;
+
+ val |= MIC0_ON_MUX;
+ } else
+ val &= ~(MIC0_RGB_MUX | MIC0_I80_MUX | MIC0_ON_MUX);
+
+ regmap_write(mic->sysreg, DSD_CFG_MUX, val);
+ if (ret)
+ DRM_ERROR("mic: Failed to read system register\n");
+}
+
+static int mic_sw_reset(struct exynos_mic *mic)
+{
+ unsigned int retry = 100;
+ int ret;
+
+ writel(MIC_SW_RST, mic->reg + MIC_OP);
+
+ while (retry-- > 0) {
+ ret = readl(mic->reg + MIC_OP);
+ if (!(ret & MIC_SW_RST))
+ return 0;
+
+ udelay(10);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static void mic_set_porch_timing(struct exynos_mic *mic)
+{
+ struct videomode vm = mic->vm;
+ u32 reg;
+
+ reg = MIC_V_PULSE_WIDTH(vm.vsync_len) +
+ MIC_V_PERIOD_LINE(vm.vsync_len + vm.vactive +
+ vm.vback_porch + vm.vfront_porch);
+ writel(reg, mic->reg + MIC_V_TIMING_0);
+
+ reg = MIC_VBP_SIZE(vm.vback_porch) +
+ MIC_VFP_SIZE(vm.vfront_porch);
+ writel(reg, mic->reg + MIC_V_TIMING_1);
+
+ reg = MIC_V_PULSE_WIDTH(vm.hsync_len) +
+ MIC_V_PERIOD_LINE(vm.hsync_len + vm.hactive +
+ vm.hback_porch + vm.hfront_porch);
+ writel(reg, mic->reg + MIC_INPUT_TIMING_0);
+
+ reg = MIC_VBP_SIZE(vm.hback_porch) +
+ MIC_VFP_SIZE(vm.hfront_porch);
+ writel(reg, mic->reg + MIC_INPUT_TIMING_1);
+}
+
+static void mic_set_img_size(struct exynos_mic *mic)
+{
+ struct videomode *vm = &mic->vm;
+ u32 reg;
+
+ reg = MIC_IMG_H_SIZE(vm->hactive) +
+ MIC_IMG_V_SIZE(vm->vactive);
+
+ writel(reg, mic->reg + MIC_IMG_SIZE);
+}
+
+static void mic_set_output_timing(struct exynos_mic *mic)
+{
+ struct videomode vm = mic->vm;
+ u32 reg, bs_size_2d;
+
+ DRM_DEBUG("w: %u, h: %u\n", vm.hactive, vm.vactive);
+ bs_size_2d = ((vm.hactive >> 2) << 1) + (vm.vactive % 4);
+ reg = MIC_BS_SIZE_2D(bs_size_2d);
+ writel(reg, mic->reg + MIC_2D_OUTPUT_TIMING_2);
+
+ if (!mic->i80_mode) {
+ reg = MIC_H_PULSE_WIDTH_2D(vm.hsync_len) +
+ MIC_H_PERIOD_PIXEL_2D(vm.hsync_len + bs_size_2d +
+ vm.hback_porch + vm.hfront_porch);
+ writel(reg, mic->reg + MIC_2D_OUTPUT_TIMING_0);
+
+ reg = MIC_HBP_SIZE_2D(vm.hback_porch) +
+ MIC_H_PERIOD_PIXEL_2D(vm.hfront_porch);
+ writel(reg, mic->reg + MIC_2D_OUTPUT_TIMING_1);
+ }
+}
+
+static void mic_set_reg_on(struct exynos_mic *mic, bool enable)
+{
+ u32 reg = readl(mic->reg + MIC_OP);
+
+ if (enable) {
+ reg &= ~(MIC_MODE_SEL_MASK | MIC_CORE_VER_CONTROL | MIC_PSR_EN);
+ reg |= (MIC_CORE_EN | MIC_BS_CHG_OUT | MIC_ON_REG);
+
+ reg &= ~MIC_MODE_SEL_COMMAND_MODE;
+ if (mic->i80_mode)
+ reg |= MIC_MODE_SEL_COMMAND_MODE;
+ } else {
+ reg &= ~MIC_CORE_EN;
+ }
+
+ reg |= MIC_UPD_REG;
+ writel(reg, mic->reg + MIC_OP);
+}
+
+static struct device_node *get_remote_node(struct device_node *from, int reg)
+{
+ struct device_node *endpoint = NULL, *remote_node = NULL;
+
+ endpoint = of_graph_get_endpoint_by_regs(from, reg, -1);
+ if (!endpoint) {
+ DRM_ERROR("mic: Failed to find remote port from %s",
+ from->full_name);
+ goto exit;
+ }
+
+ remote_node = of_graph_get_remote_port_parent(endpoint);
+ if (!remote_node) {
+ DRM_ERROR("mic: Failed to find remote port parent from %s",
+ from->full_name);
+ goto exit;
+ }
+
+exit:
+ of_node_put(endpoint);
+ return remote_node;
+}
+
+static int parse_dt(struct exynos_mic *mic)
+{
+ int ret = 0, i, j;
+ struct device_node *remote_node;
+ struct device_node *nodes[3];
+
+ /*
+ * The order of endpoints does matter.
+ * The first node must be for decon and the second one must be for dsi.
+ */
+ for (i = 0, j = 0; i < NUM_ENDPOINTS; i++) {
+ remote_node = get_remote_node(mic->dev->of_node, i);
+ if (!remote_node) {
+ ret = -EPIPE;
+ goto exit;
+ }
+ nodes[j++] = remote_node;
+
+ switch (i) {
+ case ENDPOINT_DECON_NODE:
+ /* decon node */
+ if (of_get_child_by_name(remote_node,
+ "i80-if-timings"))
+ mic->i80_mode = 1;
+
+ break;
+ case ENDPOINT_DSI_NODE:
+ /* panel node */
+ remote_node = get_remote_node(remote_node, 1);
+ if (!remote_node) {
+ ret = -EPIPE;
+ goto exit;
+ }
+ nodes[j++] = remote_node;
+
+ ret = of_get_videomode(remote_node,
+ &mic->vm, 0);
+ if (ret) {
+ DRM_ERROR("mic: failed to get videomode");
+ goto exit;
+ }
+
+ break;
+ default:
+ DRM_ERROR("mic: Unknown endpoint from MIC");
+ break;
+ }
+ }
+
+exit:
+ while (--j > -1)
+ of_node_put(nodes[j]);
+
+ return ret;
+}
+
+void mic_disable(struct drm_bridge *bridge) { }
+
+void mic_post_disable(struct drm_bridge *bridge)
+{
+ struct exynos_mic *mic = bridge->driver_private;
+ int i;
+
+ mutex_lock(&mic_mutex);
+ if (!mic->enabled)
+ goto already_disabled;
+
+ mic_set_path(mic, 0);
+
+ for (i = NUM_CLKS - 1; i > -1; i--)
+ clk_disable_unprepare(mic->clks[i]);
+
+ mic->enabled = 0;
+
+already_disabled:
+ mutex_unlock(&mic_mutex);
+}
+
+void mic_pre_enable(struct drm_bridge *bridge)
+{
+ struct exynos_mic *mic = bridge->driver_private;
+ int ret, i;
+
+ mutex_lock(&mic_mutex);
+ if (mic->enabled)
+ goto already_enabled;
+
+ for (i = 0; i < NUM_CLKS; i++) {
+ ret = clk_prepare_enable(mic->clks[i]);
+ if (ret < 0) {
+ DRM_ERROR("Failed to enable clock (%s)\n",
+ clk_names[i]);
+ goto turn_off_clks;
+ }
+ }
+
+ mic_set_path(mic, 1);
+
+ ret = mic_sw_reset(mic);
+ if (ret) {
+ DRM_ERROR("Failed to reset\n");
+ goto turn_off_clks;
+ }
+
+ if (!mic->i80_mode)
+ mic_set_porch_timing(mic);
+ mic_set_img_size(mic);
+ mic_set_output_timing(mic);
+ mic_set_reg_on(mic, 1);
+ mic->enabled = 1;
+ mutex_unlock(&mic_mutex);
+
+ return;
+
+turn_off_clks:
+ while (--i > -1)
+ clk_disable_unprepare(mic->clks[i]);
+already_enabled:
+ mutex_unlock(&mic_mutex);
+}
+
+void mic_enable(struct drm_bridge *bridge) { }
+
+void mic_destroy(struct drm_bridge *bridge)
+{
+ struct exynos_mic *mic = bridge->driver_private;
+ int i;
+
+ mutex_lock(&mic_mutex);
+ if (!mic->enabled)
+ goto already_disabled;
+
+ for (i = NUM_CLKS - 1; i > -1; i--)
+ clk_disable_unprepare(mic->clks[i]);
+
+already_disabled:
+ mutex_unlock(&mic_mutex);
+}
+
+struct drm_bridge_funcs mic_bridge_funcs = {
+ .disable = mic_disable,
+ .post_disable = mic_post_disable,
+ .pre_enable = mic_pre_enable,
+ .enable = mic_enable,
+};
+
+int exynos_mic_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct exynos_mic *mic;
+ struct resource res;
+ int ret, i;
+
+ mic = devm_kzalloc(dev, sizeof(*mic), GFP_KERNEL);
+ if (!mic) {
+ DRM_ERROR("mic: Failed to allocate memory for MIC object\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ mic->dev = dev;
+
+ ret = parse_dt(mic);
+ if (ret)
+ goto err;
+
+ ret = of_address_to_resource(dev->of_node, 0, &res);
+ if (ret) {
+ DRM_ERROR("mic: Failed to get mem region for MIC\n");
+ goto err;
+ }
+ mic->reg = devm_ioremap(dev, res.start, resource_size(&res));
+ if (!mic->reg) {
+ DRM_ERROR("mic: Failed to remap for MIC\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ mic->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "samsung,disp-syscon");
+ if (IS_ERR(mic->sysreg)) {
+ DRM_ERROR("mic: Failed to get system register.\n");
+ goto err;
+ }
+
+ mic->bridge.funcs = &mic_bridge_funcs;
+ mic->bridge.of_node = dev->of_node;
+ mic->bridge.driver_private = mic;
+ ret = drm_bridge_add(&mic->bridge);
+ if (ret) {
+ DRM_ERROR("mic: Failed to add MIC to the global bridge list\n");
+ goto err;
+ }
+
+ for (i = 0; i < NUM_CLKS; i++) {
+ mic->clks[i] = of_clk_get_by_name(dev->of_node, clk_names[i]);
+ if (IS_ERR(mic->clks[i])) {
+ DRM_ERROR("mic: Failed to get clock (%s)\n",
+ clk_names[i]);
+ ret = PTR_ERR(mic->clks[i]);
+ goto err;
+ }
+ }
+
+ DRM_DEBUG_KMS("MIC has been probed\n");
+
+err:
+ return ret;
+}
+
+static int exynos_mic_remove(struct platform_device *pdev)
+{
+ struct exynos_mic *mic = platform_get_drvdata(pdev);
+ int i;
+
+ drm_bridge_remove(&mic->bridge);
+
+ for (i = NUM_CLKS - 1; i > -1; i--)
+ clk_put(mic->clks[i]);
+
+ return 0;
+}
+
+static const struct of_device_id exynos_mic_of_match[] = {
+ { .compatible = "samsung,exynos5433-mic" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, exynos_mic_of_match);
+
+struct platform_driver mic_driver = {
+ .probe = exynos_mic_probe,
+ .remove = exynos_mic_remove,
+ .driver = {
+ .name = "exynos-mic",
+ .owner = THIS_MODULE,
+ .of_match_table = exynos_mic_of_match,
+ },
+};
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v5 04/12] drm/exynos: dsi: rename pll_clk to sclk_clk
2015-04-10 5:55 [PATCH v5 00/12] Add drivers for Exynos5433 display Hyungwon Hwang
[not found] ` <1428645330-1043-1-git-send-email-human.hwang-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-04-10 5:55 ` [PATCH v5 03/12] drm/exynos: mic: add MIC driver Hyungwon Hwang
@ 2015-04-10 5:55 ` Hyungwon Hwang
2015-04-15 1:24 ` Inki Dae
2015-04-10 5:55 ` [PATCH v5 05/12] drm/exynos: dsi: add macros for register access Hyungwon Hwang
` (6 subsequent siblings)
9 siblings, 1 reply; 16+ messages in thread
From: Hyungwon Hwang @ 2015-04-10 5:55 UTC (permalink / raw)
To: dri-devel, devicetree, inki.dae, daniel
Cc: dh09.lee, sw0312.kim, Hyungwon Hwang, cw00.choi
This patch renames pll_clk to sclk_clk. The clock referenced by pll_clk
is actually not the pll input clock for dsi. The pll input clock comes
from the board's oscillator directly.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
---
Changes for v3:
- Newly added
Changes for v4:
- None
Changes for v5:
- None
.../devicetree/bindings/video/exynos_dsim.txt | 7 ++---
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 31 ++++++++--------------
2 files changed, 15 insertions(+), 23 deletions(-)
diff --git a/Documentation/devicetree/bindings/video/exynos_dsim.txt b/Documentation/devicetree/bindings/video/exynos_dsim.txt
index 802aa7e..44659dd 100644
--- a/Documentation/devicetree/bindings/video/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dsim.txt
@@ -10,13 +10,14 @@ Required properties:
- interrupts: should contain DSI interrupt
- clocks: list of clock specifiers, must contain an entry for each required
entry in clock-names
- - clock-names: should include "bus_clk"and "pll_clk" entries
+ - clock-names: should include "bus_clk"and "sclk_mipi" entries
+ the use of "pll_clk" is deprecated
- phys: list of phy specifiers, must contain an entry for each required
entry in phy-names
- phy-names: should include "dsim" entry
- vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V)
- vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
- - samsung,pll-clock-frequency: specifies frequency of the "pll_clk" clock
+ - samsung,pll-clock-frequency: specifies frequency of the oscillator clock
- #address-cells, #size-cells: should be set respectively to <1> and <0>
according to DSI host bindings (see MIPI DSI bindings [1])
@@ -48,7 +49,7 @@ Example:
reg = <0x11C80000 0x10000>;
interrupts = <0 79 0>;
clocks = <&clock 286>, <&clock 143>;
- clock-names = "bus_clk", "pll_clk";
+ clock-names = "bus_clk", "sclk_mipi";
phys = <&mipi_phy 1>;
phy-names = "dsim";
vddcore-supply = <&vusb_reg>;
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 0492715..178be44 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -277,7 +277,7 @@ struct exynos_dsi {
void __iomem *reg_base;
struct phy *phy;
- struct clk *pll_clk;
+ struct clk *sclk_clk;
struct clk *bus_clk;
struct regulator_bulk_data supplies[2];
int irq;
@@ -431,16 +431,7 @@ static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
u16 m;
u32 reg;
- clk_set_rate(dsi->pll_clk, dsi->pll_clk_rate);
-
- fin = clk_get_rate(dsi->pll_clk);
- if (!fin) {
- dev_err(dsi->dev, "failed to get PLL clock frequency\n");
- return 0;
- }
-
- dev_dbg(dsi->dev, "PLL input frequency: %lu\n", fin);
-
+ fin = dsi->pll_clk_rate;
fout = exynos_dsi_pll_find_pms(dsi, fin, freq, &p, &m, &s);
if (!fout) {
dev_err(dsi->dev,
@@ -1308,10 +1299,10 @@ static int exynos_dsi_poweron(struct exynos_dsi *dsi)
goto err_bus_clk;
}
- ret = clk_prepare_enable(dsi->pll_clk);
+ ret = clk_prepare_enable(dsi->sclk_clk);
if (ret < 0) {
dev_err(dsi->dev, "cannot enable pll clock %d\n", ret);
- goto err_pll_clk;
+ goto err_sclk_clk;
}
ret = phy_power_on(dsi->phy);
@@ -1323,8 +1314,8 @@ static int exynos_dsi_poweron(struct exynos_dsi *dsi)
return 0;
err_phy:
- clk_disable_unprepare(dsi->pll_clk);
-err_pll_clk:
+ clk_disable_unprepare(dsi->sclk_clk);
+err_sclk_clk:
clk_disable_unprepare(dsi->bus_clk);
err_bus_clk:
regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
@@ -1350,7 +1341,7 @@ static void exynos_dsi_poweroff(struct exynos_dsi *dsi)
phy_power_off(dsi->phy);
- clk_disable_unprepare(dsi->pll_clk);
+ clk_disable_unprepare(dsi->sclk_clk);
clk_disable_unprepare(dsi->bus_clk);
ret = regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
@@ -1713,10 +1704,10 @@ static int exynos_dsi_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
}
- dsi->pll_clk = devm_clk_get(dev, "pll_clk");
- if (IS_ERR(dsi->pll_clk)) {
- dev_info(dev, "failed to get dsi pll input clock\n");
- ret = PTR_ERR(dsi->pll_clk);
+ dsi->sclk_clk = devm_clk_get(dev, "sclk_mipi");
+ if (IS_ERR(dsi->sclk_clk)) {
+ dev_info(dev, "failed to get dsi sclk clock\n");
+ ret = PTR_ERR(dsi->sclk_clk);
goto err_del_component;
}
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v5 04/12] drm/exynos: dsi: rename pll_clk to sclk_clk
2015-04-10 5:55 ` [PATCH v5 04/12] drm/exynos: dsi: rename pll_clk to sclk_clk Hyungwon Hwang
@ 2015-04-15 1:24 ` Inki Dae
0 siblings, 0 replies; 16+ messages in thread
From: Inki Dae @ 2015-04-15 1:24 UTC (permalink / raw)
To: Hyungwon Hwang; +Cc: devicetree, sw0312.kim, dh09.lee, cw00.choi, dri-devel
On 2015년 04월 10일 14:55, Hyungwon Hwang wrote:
> This patch renames pll_clk to sclk_clk. The clock referenced by pll_clk
> is actually not the pll input clock for dsi. The pll input clock comes
> from the board's oscillator directly.
>
> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
> ---
> Changes for v3:
> - Newly added
>
> Changes for v4:
> - None
>
> Changes for v5:
> - None
> .../devicetree/bindings/video/exynos_dsim.txt | 7 ++---
> drivers/gpu/drm/exynos/exynos_drm_dsi.c | 31 ++++++++--------------
> 2 files changed, 15 insertions(+), 23 deletions(-)
>
...snip...
> @@ -1350,7 +1341,7 @@ static void exynos_dsi_poweroff(struct exynos_dsi *dsi)
>
> phy_power_off(dsi->phy);
>
> - clk_disable_unprepare(dsi->pll_clk);
> + clk_disable_unprepare(dsi->sclk_clk);
> clk_disable_unprepare(dsi->bus_clk);
>
> ret = regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
> @@ -1713,10 +1704,10 @@ static int exynos_dsi_probe(struct platform_device *pdev)
> return -EPROBE_DEFER;
> }
>
> - dsi->pll_clk = devm_clk_get(dev, "pll_clk");
> - if (IS_ERR(dsi->pll_clk)) {
> - dev_info(dev, "failed to get dsi pll input clock\n");
> - ret = PTR_ERR(dsi->pll_clk);
> + dsi->sclk_clk = devm_clk_get(dev, "sclk_mipi");
As I mentioned before, this patch makes existing device tree to be
broken so this cannot be merged even though you posted an another patch
which resolves the dt broken issue. That is because each patch shouldn't
incur any problem on working. So it'd be better to integrate this patch
and patch 9.
Thanks,
Inki Dae
> + if (IS_ERR(dsi->sclk_clk)) {
> + dev_info(dev, "failed to get dsi sclk clock\n");
> + ret = PTR_ERR(dsi->sclk_clk);
> goto err_del_component;
> }
>
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v5 05/12] drm/exynos: dsi: add macros for register access
2015-04-10 5:55 [PATCH v5 00/12] Add drivers for Exynos5433 display Hyungwon Hwang
` (2 preceding siblings ...)
2015-04-10 5:55 ` [PATCH v5 04/12] drm/exynos: dsi: rename pll_clk to sclk_clk Hyungwon Hwang
@ 2015-04-10 5:55 ` Hyungwon Hwang
2015-04-10 5:55 ` [PATCH v5 06/12] drm/exynos: dsi: make use of driver data for static values Hyungwon Hwang
` (5 subsequent siblings)
9 siblings, 0 replies; 16+ messages in thread
From: Hyungwon Hwang @ 2015-04-10 5:55 UTC (permalink / raw)
To: dri-devel, devicetree, inki.dae, daniel
Cc: dh09.lee, sw0312.kim, Hyungwon Hwang, cw00.choi
This patch adds macros for register writing/reading. This is needed for
adding support Exynos5433 MIPI DSI driver, not by using if statement, but
by using driver data.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
---
Changes for v5:
- Newly added
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 98 +++++++++++++++++----------------
1 file changed, 51 insertions(+), 47 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 178be44..1074dce 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -234,6 +234,9 @@
#define DSI_XFER_TIMEOUT_MS 100
#define DSI_RX_FIFO_EMPTY 0x30800002
+#define DSI_WRITE(dsi, reg, val) writel((val), (dsi)->reg_base + (reg))
+#define DSI_READ(dsi, reg) readl((dsi)->reg_base + (reg))
+
enum exynos_dsi_transfer_type {
EXYNOS_DSI_TX,
EXYNOS_DSI_RX,
@@ -361,8 +364,10 @@ static void exynos_dsi_wait_for_reset(struct exynos_dsi *dsi)
static void exynos_dsi_reset(struct exynos_dsi *dsi)
{
+ struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
+
reinit_completion(&dsi->completed);
- writel(DSIM_SWRST, dsi->reg_base + DSIM_SWRST_REG);
+ DSI_WRITE(dsi, DSIM_SWRST_REG, DSIM_SWRST);
}
#ifndef MHZ
@@ -372,6 +377,7 @@ static void exynos_dsi_reset(struct exynos_dsi *dsi)
static unsigned long exynos_dsi_pll_find_pms(struct exynos_dsi *dsi,
unsigned long fin, unsigned long fout, u8 *p, u16 *m, u8 *s)
{
+ struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
unsigned long best_freq = 0;
u32 min_delta = 0xffffffff;
u8 p_min, p_max;
@@ -462,7 +468,7 @@ static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
reg |= DSIM_FREQ_BAND(band);
}
- writel(reg, dsi->reg_base + DSIM_PLLCTRL_REG);
+ DSI_WRITE(dsi, DSIM_PLLCTRL_REG, reg);
timeout = 1000;
do {
@@ -470,7 +476,7 @@ static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
dev_err(dsi->dev, "PLL failed to stabilize\n");
return 0;
}
- reg = readl(dsi->reg_base + DSIM_STATUS_REG);
+ reg = DSI_READ(dsi, DSIM_STATUS_REG);
} while ((reg & DSIM_PLL_STABLE) == 0);
return fout;
@@ -500,7 +506,7 @@ static int exynos_dsi_enable_clock(struct exynos_dsi *dsi)
dev_dbg(dsi->dev, "hs_clk = %lu, byte_clk = %lu, esc_clk = %lu\n",
hs_clk, byte_clk, esc_clk);
- reg = readl(dsi->reg_base + DSIM_CLKCTRL_REG);
+ reg = DSI_READ(dsi, DSIM_CLKCTRL_REG);
reg &= ~(DSIM_ESC_PRESCALER_MASK | DSIM_LANE_ESC_CLK_EN_CLK
| DSIM_LANE_ESC_CLK_EN_DATA_MASK | DSIM_PLL_BYPASS
| DSIM_BYTE_CLK_SRC_MASK);
@@ -510,7 +516,7 @@ static int exynos_dsi_enable_clock(struct exynos_dsi *dsi)
| DSIM_LANE_ESC_CLK_EN_DATA(BIT(dsi->lanes) - 1)
| DSIM_BYTE_CLK_SRC(0)
| DSIM_TX_REQUEST_HSCLK;
- writel(reg, dsi->reg_base + DSIM_CLKCTRL_REG);
+ DSI_WRITE(dsi, DSIM_CLKCTRL_REG, reg);
return 0;
}
@@ -525,7 +531,7 @@ static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
/* B D-PHY: D-PHY Master & Slave Analog Block control */
reg = DSIM_PHYCTRL_ULPS_EXIT(0x0af);
- writel(reg, dsi->reg_base + DSIM_PHYCTRL_REG);
+ DSI_WRITE(dsi, DSIM_PHYCTRL_REG, reg);
/*
* T LPX: Transmitted length of any Low-Power state period
@@ -533,7 +539,7 @@ static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
* burst
*/
reg = DSIM_PHYTIMING_LPX(0x06) | DSIM_PHYTIMING_HS_EXIT(0x0b);
- writel(reg, dsi->reg_base + DSIM_PHYTIMING_REG);
+ DSI_WRITE(dsi, DSIM_PHYTIMING_REG, reg);
/*
* T CLK-PREPARE: Time that the transmitter drives the Clock Lane LP-00
@@ -552,7 +558,7 @@ static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
DSIM_PHYTIMING1_CLK_ZERO(0x27) |
DSIM_PHYTIMING1_CLK_POST(0x0d) |
DSIM_PHYTIMING1_CLK_TRAIL(0x08);
- writel(reg, dsi->reg_base + DSIM_PHYTIMING1_REG);
+ DSI_WRITE(dsi, DSIM_PHYTIMING1_REG, reg);
/*
* T HS-PREPARE: Time that the transmitter drives the Data Lane LP-00
@@ -565,21 +571,21 @@ static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
*/
reg = DSIM_PHYTIMING2_HS_PREPARE(0x09) | DSIM_PHYTIMING2_HS_ZERO(0x0d) |
DSIM_PHYTIMING2_HS_TRAIL(0x0b);
- writel(reg, dsi->reg_base + DSIM_PHYTIMING2_REG);
+ DSI_WRITE(dsi, DSIM_PHYTIMING2_REG, reg);
}
static void exynos_dsi_disable_clock(struct exynos_dsi *dsi)
{
u32 reg;
- reg = readl(dsi->reg_base + DSIM_CLKCTRL_REG);
+ reg = DSI_READ(dsi, DSIM_CLKCTRL_REG);
reg &= ~(DSIM_LANE_ESC_CLK_EN_CLK | DSIM_LANE_ESC_CLK_EN_DATA_MASK
| DSIM_ESC_CLKEN | DSIM_BYTE_CLKEN);
- writel(reg, dsi->reg_base + DSIM_CLKCTRL_REG);
+ DSI_WRITE(dsi, DSIM_CLKCTRL_REG, reg);
- reg = readl(dsi->reg_base + DSIM_PLLCTRL_REG);
+ reg = DSI_READ(dsi, DSIM_PLLCTRL_REG);
reg &= ~DSIM_PLL_EN;
- writel(reg, dsi->reg_base + DSIM_PLLCTRL_REG);
+ DSI_WRITE(dsi, DSIM_PLLCTRL_REG, reg);
}
static int exynos_dsi_init_link(struct exynos_dsi *dsi)
@@ -590,15 +596,14 @@ static int exynos_dsi_init_link(struct exynos_dsi *dsi)
u32 lanes_mask;
/* Initialize FIFO pointers */
- reg = readl(dsi->reg_base + DSIM_FIFOCTRL_REG);
+ reg = DSI_READ(dsi, DSIM_FIFOCTRL_REG);
reg &= ~0x1f;
- writel(reg, dsi->reg_base + DSIM_FIFOCTRL_REG);
+ DSI_WRITE(dsi, DSIM_FIFOCTRL_REG, reg);
usleep_range(9000, 11000);
reg |= 0x1f;
- writel(reg, dsi->reg_base + DSIM_FIFOCTRL_REG);
-
+ DSI_WRITE(dsi, DSIM_FIFOCTRL_REG, reg);
usleep_range(9000, 11000);
/* DSI configuration */
@@ -657,14 +662,14 @@ static int exynos_dsi_init_link(struct exynos_dsi *dsi)
reg |= DSIM_NUM_OF_DATA_LANE(dsi->lanes - 1);
- writel(reg, dsi->reg_base + DSIM_CONFIG_REG);
+ DSI_WRITE(dsi, DSIM_CONFIG_REG, reg);
reg |= DSIM_LANE_EN_CLK;
- writel(reg, dsi->reg_base + DSIM_CONFIG_REG);
+ DSI_WRITE(dsi, DSIM_CONFIG_REG, reg);
lanes_mask = BIT(dsi->lanes) - 1;
reg |= DSIM_LANE_EN(lanes_mask);
- writel(reg, dsi->reg_base + DSIM_CONFIG_REG);
+ DSI_WRITE(dsi, DSIM_CONFIG_REG, reg);
/*
* Use non-continuous clock mode if the periparal wants and
@@ -677,7 +682,7 @@ static int exynos_dsi_init_link(struct exynos_dsi *dsi)
if (driver_data->has_clklane_stop &&
dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
reg |= DSIM_CLKLANE_STOP;
- writel(reg, dsi->reg_base + DSIM_CONFIG_REG);
+ DSI_WRITE(dsi, DSIM_CONFIG_REG, reg);
}
/* Check clock and data lane state are stop state */
@@ -688,19 +693,19 @@ static int exynos_dsi_init_link(struct exynos_dsi *dsi)
return -EFAULT;
}
- reg = readl(dsi->reg_base + DSIM_STATUS_REG);
+ reg = DSI_READ(dsi, DSIM_STATUS_REG);
if ((reg & DSIM_STOP_STATE_DAT(lanes_mask))
!= DSIM_STOP_STATE_DAT(lanes_mask))
continue;
} while (!(reg & (DSIM_STOP_STATE_CLK | DSIM_TX_READY_HS_CLK)));
- reg = readl(dsi->reg_base + DSIM_ESCMODE_REG);
+ reg = DSI_READ(dsi, DSIM_ESCMODE_REG);
reg &= ~DSIM_STOP_STATE_CNT_MASK;
reg |= DSIM_STOP_STATE_CNT(0xf);
- writel(reg, dsi->reg_base + DSIM_ESCMODE_REG);
+ DSI_WRITE(dsi, DSIM_ESCMODE_REG, reg);
reg = DSIM_BTA_TIMEOUT(0xff) | DSIM_LPDR_TIMEOUT(0xffff);
- writel(reg, dsi->reg_base + DSIM_TIMEOUT_REG);
+ DSI_WRITE(dsi, DSIM_TIMEOUT_REG, reg);
return 0;
}
@@ -714,19 +719,19 @@ static void exynos_dsi_set_display_mode(struct exynos_dsi *dsi)
reg = DSIM_CMD_ALLOW(0xf)
| DSIM_STABLE_VFP(vm->vfront_porch)
| DSIM_MAIN_VBP(vm->vback_porch);
- writel(reg, dsi->reg_base + DSIM_MVPORCH_REG);
+ DSI_WRITE(dsi, DSIM_MVPORCH_REG, reg);
reg = DSIM_MAIN_HFP(vm->hfront_porch)
| DSIM_MAIN_HBP(vm->hback_porch);
- writel(reg, dsi->reg_base + DSIM_MHPORCH_REG);
+ DSI_WRITE(dsi, DSIM_MHPORCH_REG, reg);
reg = DSIM_MAIN_VSA(vm->vsync_len)
| DSIM_MAIN_HSA(vm->hsync_len);
- writel(reg, dsi->reg_base + DSIM_MSYNC_REG);
+ DSI_WRITE(dsi, DSIM_MSYNC_REG, reg);
}
reg = DSIM_MAIN_HRESOL(vm->hactive) | DSIM_MAIN_VRESOL(vm->vactive);
- writel(reg, dsi->reg_base + DSIM_MDRESOL_REG);
+ DSI_WRITE(dsi, DSIM_MDRESOL_REG, reg);
dev_dbg(dsi->dev, "LCD size = %dx%d\n", vm->hactive, vm->vactive);
}
@@ -735,12 +740,12 @@ static void exynos_dsi_set_display_enable(struct exynos_dsi *dsi, bool enable)
{
u32 reg;
- reg = readl(dsi->reg_base + DSIM_MDRESOL_REG);
+ reg = DSI_READ(dsi, DSIM_MDRESOL_REG);
if (enable)
reg |= DSIM_MAIN_STAND_BY;
else
reg &= ~DSIM_MAIN_STAND_BY;
- writel(reg, dsi->reg_base + DSIM_MDRESOL_REG);
+ DSI_WRITE(dsi, DSIM_MDRESOL_REG, reg);
}
static int exynos_dsi_wait_for_hdr_fifo(struct exynos_dsi *dsi)
@@ -748,7 +753,7 @@ static int exynos_dsi_wait_for_hdr_fifo(struct exynos_dsi *dsi)
int timeout = 2000;
do {
- u32 reg = readl(dsi->reg_base + DSIM_FIFOCTRL_REG);
+ u32 reg = DSI_READ(dsi, DSIM_FIFOCTRL_REG);
if (!(reg & DSIM_SFR_HEADER_FULL))
return 0;
@@ -762,22 +767,21 @@ static int exynos_dsi_wait_for_hdr_fifo(struct exynos_dsi *dsi)
static void exynos_dsi_set_cmd_lpm(struct exynos_dsi *dsi, bool lpm)
{
- u32 v = readl(dsi->reg_base + DSIM_ESCMODE_REG);
+ u32 v = DSI_READ(dsi, DSIM_ESCMODE_REG);
if (lpm)
v |= DSIM_CMD_LPDT_LP;
else
v &= ~DSIM_CMD_LPDT_LP;
- writel(v, dsi->reg_base + DSIM_ESCMODE_REG);
+ DSI_WRITE(dsi, DSIM_ESCMODE_REG, v);
}
static void exynos_dsi_force_bta(struct exynos_dsi *dsi)
{
- u32 v = readl(dsi->reg_base + DSIM_ESCMODE_REG);
-
+ u32 v = DSI_READ(dsi, DSIM_ESCMODE_REG);
v |= DSIM_FORCE_BTA;
- writel(v, dsi->reg_base + DSIM_ESCMODE_REG);
+ DSI_WRITE(dsi, DSIM_ESCMODE_REG, v);
}
static void exynos_dsi_send_to_fifo(struct exynos_dsi *dsi,
@@ -801,7 +805,7 @@ static void exynos_dsi_send_to_fifo(struct exynos_dsi *dsi,
while (length >= 4) {
reg = (payload[3] << 24) | (payload[2] << 16)
| (payload[1] << 8) | payload[0];
- writel(reg, dsi->reg_base + DSIM_PAYLOAD_REG);
+ DSI_WRITE(dsi, DSIM_PAYLOAD_REG, reg);
payload += 4;
length -= 4;
}
@@ -816,7 +820,7 @@ static void exynos_dsi_send_to_fifo(struct exynos_dsi *dsi,
/* Fall through */
case 1:
reg |= payload[0];
- writel(reg, dsi->reg_base + DSIM_PAYLOAD_REG);
+ DSI_WRITE(dsi, DSIM_PAYLOAD_REG, reg);
break;
case 0:
/* Do nothing */
@@ -839,7 +843,7 @@ static void exynos_dsi_send_to_fifo(struct exynos_dsi *dsi,
dsi->state ^= DSIM_STATE_CMD_LPM;
}
- writel(reg, dsi->reg_base + DSIM_PKTHDR_REG);
+ DSI_WRITE(dsi, DSIM_PKTHDR_REG, reg);
if (xfer->flags & MIPI_DSI_MSG_REQ_ACK)
exynos_dsi_force_bta(dsi);
@@ -855,7 +859,7 @@ static void exynos_dsi_read_from_fifo(struct exynos_dsi *dsi,
u32 reg;
if (first) {
- reg = readl(dsi->reg_base + DSIM_RXFIFO_REG);
+ reg = DSI_READ(dsi, DSIM_RXFIFO_REG);
switch (reg & 0x3f) {
case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE:
@@ -894,7 +898,7 @@ static void exynos_dsi_read_from_fifo(struct exynos_dsi *dsi,
/* Receive payload */
while (length >= 4) {
- reg = readl(dsi->reg_base + DSIM_RXFIFO_REG);
+ reg = DSI_READ(dsi, DSIM_RXFIFO_REG);
payload[0] = (reg >> 0) & 0xff;
payload[1] = (reg >> 8) & 0xff;
payload[2] = (reg >> 16) & 0xff;
@@ -904,7 +908,7 @@ static void exynos_dsi_read_from_fifo(struct exynos_dsi *dsi,
}
if (length) {
- reg = readl(dsi->reg_base + DSIM_RXFIFO_REG);
+ reg = DSI_READ(dsi, DSIM_RXFIFO_REG);
switch (length) {
case 3:
payload[2] = (reg >> 16) & 0xff;
@@ -923,7 +927,7 @@ static void exynos_dsi_read_from_fifo(struct exynos_dsi *dsi,
clear_fifo:
length = DSI_RX_FIFO_SIZE / 4;
do {
- reg = readl(dsi->reg_base + DSIM_RXFIFO_REG);
+ reg = DSI_READ(dsi, DSIM_RXFIFO_REG);
if (reg == DSI_RX_FIFO_EMPTY)
break;
} while (--length);
@@ -1079,18 +1083,18 @@ static irqreturn_t exynos_dsi_irq(int irq, void *dev_id)
struct exynos_dsi *dsi = dev_id;
u32 status;
- status = readl(dsi->reg_base + DSIM_INTSRC_REG);
+ status = DSI_READ(dsi, DSIM_INTSRC_REG);
if (!status) {
static unsigned long int j;
if (printk_timed_ratelimit(&j, 500))
dev_warn(dsi->dev, "spurious interrupt\n");
return IRQ_HANDLED;
}
- writel(status, dsi->reg_base + DSIM_INTSRC_REG);
+ DSI_WRITE(dsi, DSIM_INTSRC_REG, status);
if (status & DSIM_INT_SW_RST_RELEASE) {
u32 mask = ~(DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY);
- writel(mask, dsi->reg_base + DSIM_INTMSK_REG);
+ DSI_WRITE(dsi, DSIM_INTMSK_REG, mask);
complete(&dsi->completed);
return IRQ_HANDLED;
}
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v5 06/12] drm/exynos: dsi: make use of driver data for static values
2015-04-10 5:55 [PATCH v5 00/12] Add drivers for Exynos5433 display Hyungwon Hwang
` (3 preceding siblings ...)
2015-04-10 5:55 ` [PATCH v5 05/12] drm/exynos: dsi: add macros for register access Hyungwon Hwang
@ 2015-04-10 5:55 ` Hyungwon Hwang
2015-04-10 5:55 ` [PATCH v5 07/12] drm/exynos: dsi: make use of array for clock access Hyungwon Hwang
` (4 subsequent siblings)
9 siblings, 0 replies; 16+ messages in thread
From: Hyungwon Hwang @ 2015-04-10 5:55 UTC (permalink / raw)
To: dri-devel, devicetree, inki.dae, daniel
Cc: dh09.lee, sw0312.kim, Hyungwon Hwang, cw00.choi
Exynos MIPI DSI driver uses some static values such as address offsets,
register setting values, and etc. This patch makes the driver get those
values from the driver data.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
---
Changes for v5:
- Newly added
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 196 +++++++++++++++++++++++---------
1 file changed, 145 insertions(+), 51 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 1074dce..83e6798 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -33,38 +33,6 @@
/* returns true iff both arguments logically differs */
#define NEQV(a, b) (!(a) ^ !(b))
-#define DSIM_STATUS_REG 0x0 /* Status register */
-#define DSIM_SWRST_REG 0x4 /* Software reset register */
-#define DSIM_CLKCTRL_REG 0x8 /* Clock control register */
-#define DSIM_TIMEOUT_REG 0xc /* Time out register */
-#define DSIM_CONFIG_REG 0x10 /* Configuration register */
-#define DSIM_ESCMODE_REG 0x14 /* Escape mode register */
-
-/* Main display image resolution register */
-#define DSIM_MDRESOL_REG 0x18
-#define DSIM_MVPORCH_REG 0x1c /* Main display Vporch register */
-#define DSIM_MHPORCH_REG 0x20 /* Main display Hporch register */
-#define DSIM_MSYNC_REG 0x24 /* Main display sync area register */
-
-/* Sub display image resolution register */
-#define DSIM_SDRESOL_REG 0x28
-#define DSIM_INTSRC_REG 0x2c /* Interrupt source register */
-#define DSIM_INTMSK_REG 0x30 /* Interrupt mask register */
-#define DSIM_PKTHDR_REG 0x34 /* Packet Header FIFO register */
-#define DSIM_PAYLOAD_REG 0x38 /* Payload FIFO register */
-#define DSIM_RXFIFO_REG 0x3c /* Read FIFO register */
-#define DSIM_FIFOTHLD_REG 0x40 /* FIFO threshold level register */
-#define DSIM_FIFOCTRL_REG 0x44 /* FIFO status and control register */
-
-/* FIFO memory AC characteristic register */
-#define DSIM_PLLCTRL_REG 0x4c /* PLL control register */
-#define DSIM_PHYACCHR_REG 0x54 /* D-PHY AC characteristic register */
-#define DSIM_PHYACCHR1_REG 0x58 /* D-PHY AC characteristic register1 */
-#define DSIM_PHYCTRL_REG 0x5c
-#define DSIM_PHYTIMING_REG 0x64
-#define DSIM_PHYTIMING1_REG 0x68
-#define DSIM_PHYTIMING2_REG 0x6c
-
/* DSIM_STATUS */
#define DSIM_STOP_STATE_DAT(x) (((x) & 0xf) << 0)
#define DSIM_STOP_STATE_CLK (1 << 8)
@@ -128,8 +96,8 @@
/* DSIM_MDRESOL */
#define DSIM_MAIN_STAND_BY (1 << 31)
-#define DSIM_MAIN_VRESOL(x) (((x) & 0x7ff) << 16)
-#define DSIM_MAIN_HRESOL(x) (((x) & 0X7ff) << 0)
+#define DSIM_MAIN_VRESOL(x, num_bits) (((x) & ((1 << (num_bits)) - 1)) << 16)
+#define DSIM_MAIN_HRESOL(x, num_bits) (((x) & ((1 << (num_bits)) - 1)) << 0)
/* DSIM_MVPORCH */
#define DSIM_CMD_ALLOW(x) ((x) << 28)
@@ -234,8 +202,11 @@
#define DSI_XFER_TIMEOUT_MS 100
#define DSI_RX_FIFO_EMPTY 0x30800002
-#define DSI_WRITE(dsi, reg, val) writel((val), (dsi)->reg_base + (reg))
-#define DSI_READ(dsi, reg) readl((dsi)->reg_base + (reg))
+#define REG_ADDR(dsi, reg_idx) ((dsi)->reg_base + \
+ dsi->driver_data->reg_ofs[(reg_idx)])
+#define DSI_WRITE(dsi, reg_idx, val) writel((val), \
+ REG_ADDR((dsi), (reg_idx)))
+#define DSI_READ(dsi, reg_idx) readl(REG_ADDR((dsi), (reg_idx)))
enum exynos_dsi_transfer_type {
EXYNOS_DSI_TX,
@@ -264,10 +235,15 @@ struct exynos_dsi_transfer {
#define DSIM_STATE_CMD_LPM BIT(2)
struct exynos_dsi_driver_data {
+ unsigned int *reg_ofs;
unsigned int plltmr_reg;
-
unsigned int has_freqband:1;
unsigned int has_clklane_stop:1;
+ unsigned int num_clks;
+ unsigned int max_freq;
+ unsigned int wait_for_reset;
+ unsigned int num_bits_resol;
+ unsigned int *reg_values;
};
struct exynos_dsi {
@@ -312,25 +288,133 @@ static inline struct exynos_dsi *display_to_dsi(struct exynos_drm_display *d)
return container_of(d, struct exynos_dsi, display);
}
+enum reg_idx {
+ DSIM_STATUS_REG, /* Status register */
+ DSIM_SWRST_REG, /* Software reset register */
+ DSIM_CLKCTRL_REG, /* Clock control register */
+ DSIM_TIMEOUT_REG, /* Time out register */
+ DSIM_CONFIG_REG, /* Configuration register */
+ DSIM_ESCMODE_REG, /* Escape mode register */
+ DSIM_MDRESOL_REG,
+ DSIM_MVPORCH_REG, /* Main display Vporch register */
+ DSIM_MHPORCH_REG, /* Main display Hporch register */
+ DSIM_MSYNC_REG, /* Main display sync area register */
+ DSIM_INTSRC_REG, /* Interrupt source register */
+ DSIM_INTMSK_REG, /* Interrupt mask register */
+ DSIM_PKTHDR_REG, /* Packet Header FIFO register */
+ DSIM_PAYLOAD_REG, /* Payload FIFO register */
+ DSIM_RXFIFO_REG, /* Read FIFO register */
+ DSIM_FIFOCTRL_REG, /* FIFO status and control register */
+ DSIM_PLLCTRL_REG, /* PLL control register */
+ DSIM_PHYCTRL_REG,
+ DSIM_PHYTIMING_REG,
+ DSIM_PHYTIMING1_REG,
+ DSIM_PHYTIMING2_REG,
+ NUM_REGS
+};
+static unsigned int exynos_reg_ofs[] = {
+ [DSIM_STATUS_REG] = 0x00,
+ [DSIM_SWRST_REG] = 0x04,
+ [DSIM_CLKCTRL_REG] = 0x08,
+ [DSIM_TIMEOUT_REG] = 0x0c,
+ [DSIM_CONFIG_REG] = 0x10,
+ [DSIM_ESCMODE_REG] = 0x14,
+ [DSIM_MDRESOL_REG] = 0x18,
+ [DSIM_MVPORCH_REG] = 0x1c,
+ [DSIM_MHPORCH_REG] = 0x20,
+ [DSIM_MSYNC_REG] = 0x24,
+ [DSIM_INTSRC_REG] = 0x2c,
+ [DSIM_INTMSK_REG] = 0x30,
+ [DSIM_PKTHDR_REG] = 0x34,
+ [DSIM_PAYLOAD_REG] = 0x38,
+ [DSIM_RXFIFO_REG] = 0x3c,
+ [DSIM_FIFOCTRL_REG] = 0x44,
+ [DSIM_PLLCTRL_REG] = 0x4c,
+ [DSIM_PHYCTRL_REG] = 0x5c,
+ [DSIM_PHYTIMING_REG] = 0x64,
+ [DSIM_PHYTIMING1_REG] = 0x68,
+ [DSIM_PHYTIMING2_REG] = 0x6c,
+};
+
+enum reg_value_idx {
+ RESET_TYPE,
+ PLL_TIMER,
+ STOP_STATE_CNT,
+ PHYCTRL_ULPS_EXIT,
+ PHYCTRL_VREG_LP,
+ PHYCTRL_SLEW_UP,
+ PHYTIMING_LPX,
+ PHYTIMING_HS_EXIT,
+ PHYTIMING_CLK_PREPARE,
+ PHYTIMING_CLK_ZERO,
+ PHYTIMING_CLK_POST,
+ PHYTIMING_CLK_TRAIL,
+ PHYTIMING_HS_PREPARE,
+ PHYTIMING_HS_ZERO,
+ PHYTIMING_HS_TRAIL
+};
+
+static unsigned int reg_values[] = {
+ [RESET_TYPE] = DSIM_SWRST,
+ [PLL_TIMER] = 500,
+ [STOP_STATE_CNT] = 0xf,
+ [PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0x0af),
+ [PHYCTRL_VREG_LP] = 0,
+ [PHYCTRL_SLEW_UP] = 0,
+ [PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x06),
+ [PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0b),
+ [PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x07),
+ [PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x27),
+ [PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0d),
+ [PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x08),
+ [PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x09),
+ [PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x0d),
+ [PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0b),
+};
+
static struct exynos_dsi_driver_data exynos3_dsi_driver_data = {
+ .reg_ofs = exynos_reg_ofs,
.plltmr_reg = 0x50,
.has_freqband = 1,
.has_clklane_stop = 1,
+ .num_clks = 2,
+ .max_freq = 1000,
+ .wait_for_reset = 1,
+ .num_bits_resol = 11,
+ .reg_values = reg_values,
};
static struct exynos_dsi_driver_data exynos4_dsi_driver_data = {
+ .reg_ofs = exynos_reg_ofs,
.plltmr_reg = 0x50,
.has_freqband = 1,
.has_clklane_stop = 1,
+ .num_clks = 2,
+ .max_freq = 1000,
+ .wait_for_reset = 1,
+ .num_bits_resol = 11,
+ .reg_values = reg_values,
};
static struct exynos_dsi_driver_data exynos4415_dsi_driver_data = {
+ .reg_ofs = exynos_reg_ofs,
.plltmr_reg = 0x58,
.has_clklane_stop = 1,
+ .num_clks = 2,
+ .max_freq = 1000,
+ .wait_for_reset = 1,
+ .num_bits_resol = 11,
+ .reg_values = reg_values,
};
static struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
+ .reg_ofs = exynos_reg_ofs,
.plltmr_reg = 0x58,
+ .num_clks = 2,
+ .max_freq = 1000,
+ .wait_for_reset = 1,
+ .num_bits_resol = 11,
+ .reg_values = reg_values,
};
static struct of_device_id exynos_dsi_of_match[] = {
@@ -367,7 +451,7 @@ static void exynos_dsi_reset(struct exynos_dsi *dsi)
struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
reinit_completion(&dsi->completed);
- DSI_WRITE(dsi, DSIM_SWRST_REG, DSIM_SWRST);
+ DSI_WRITE(dsi, DSIM_SWRST_REG, driver_data->reg_values[RESET_TYPE]);
}
#ifndef MHZ
@@ -401,7 +485,8 @@ static unsigned long exynos_dsi_pll_find_pms(struct exynos_dsi *dsi,
tmp = (u64)_m * fin;
do_div(tmp, _p);
- if (tmp < 500 * MHZ || tmp > 1000 * MHZ)
+ if (tmp < 500 * MHZ ||
+ tmp > driver_data->max_freq * MHZ)
continue;
tmp = (u64)_m * fin;
@@ -446,7 +531,8 @@ static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
}
dev_dbg(dsi->dev, "PLL freq %lu, (p %d, m %d, s %d)\n", fout, p, m, s);
- writel(500, dsi->reg_base + driver_data->plltmr_reg);
+ writel(driver_data->reg_values[PLL_TIMER],
+ dsi->reg_base + driver_data->plltmr_reg);
reg = DSIM_PLL_EN | DSIM_PLL_P(p) | DSIM_PLL_M(m) | DSIM_PLL_S(s);
@@ -524,13 +610,15 @@ static int exynos_dsi_enable_clock(struct exynos_dsi *dsi)
static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
{
struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
+ unsigned int *reg_values = driver_data->reg_values;
u32 reg;
if (driver_data->has_freqband)
return;
/* B D-PHY: D-PHY Master & Slave Analog Block control */
- reg = DSIM_PHYCTRL_ULPS_EXIT(0x0af);
+ reg = reg_values[PHYCTRL_ULPS_EXIT] | reg_values[PHYCTRL_VREG_LP] |
+ reg_values[PHYCTRL_SLEW_UP];
DSI_WRITE(dsi, DSIM_PHYCTRL_REG, reg);
/*
@@ -538,7 +626,7 @@ static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
* T HS-EXIT: Time that the transmitter drives LP-11 following a HS
* burst
*/
- reg = DSIM_PHYTIMING_LPX(0x06) | DSIM_PHYTIMING_HS_EXIT(0x0b);
+ reg = reg_values[PHYTIMING_LPX] | reg_values[PHYTIMING_HS_EXIT];
DSI_WRITE(dsi, DSIM_PHYTIMING_REG, reg);
/*
@@ -554,10 +642,11 @@ static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
* T CLK-TRAIL: Time that the transmitter drives the HS-0 state after
* the last payload clock bit of a HS transmission burst
*/
- reg = DSIM_PHYTIMING1_CLK_PREPARE(0x07) |
- DSIM_PHYTIMING1_CLK_ZERO(0x27) |
- DSIM_PHYTIMING1_CLK_POST(0x0d) |
- DSIM_PHYTIMING1_CLK_TRAIL(0x08);
+ reg = reg_values[PHYTIMING_CLK_PREPARE] |
+ reg_values[PHYTIMING_CLK_ZERO] |
+ reg_values[PHYTIMING_CLK_POST] |
+ reg_values[PHYTIMING_CLK_TRAIL];
+
DSI_WRITE(dsi, DSIM_PHYTIMING1_REG, reg);
/*
@@ -569,8 +658,8 @@ static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
* T HS-TRAIL: Time that the transmitter drives the flipped differential
* state after last payload data bit of a HS transmission burst
*/
- reg = DSIM_PHYTIMING2_HS_PREPARE(0x09) | DSIM_PHYTIMING2_HS_ZERO(0x0d) |
- DSIM_PHYTIMING2_HS_TRAIL(0x0b);
+ reg = reg_values[PHYTIMING_HS_PREPARE] | reg_values[PHYTIMING_HS_ZERO] |
+ reg_values[PHYTIMING_HS_TRAIL];
DSI_WRITE(dsi, DSIM_PHYTIMING2_REG, reg);
}
@@ -701,7 +790,7 @@ static int exynos_dsi_init_link(struct exynos_dsi *dsi)
reg = DSI_READ(dsi, DSIM_ESCMODE_REG);
reg &= ~DSIM_STOP_STATE_CNT_MASK;
- reg |= DSIM_STOP_STATE_CNT(0xf);
+ reg |= DSIM_STOP_STATE_CNT(driver_data->reg_values[STOP_STATE_CNT]);
DSI_WRITE(dsi, DSIM_ESCMODE_REG, reg);
reg = DSIM_BTA_TIMEOUT(0xff) | DSIM_LPDR_TIMEOUT(0xffff);
@@ -713,6 +802,7 @@ static int exynos_dsi_init_link(struct exynos_dsi *dsi)
static void exynos_dsi_set_display_mode(struct exynos_dsi *dsi)
{
struct videomode *vm = &dsi->vm;
+ unsigned int num_bits_resol = dsi->driver_data->num_bits_resol;
u32 reg;
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
@@ -729,8 +819,9 @@ static void exynos_dsi_set_display_mode(struct exynos_dsi *dsi)
| DSIM_MAIN_HSA(vm->hsync_len);
DSI_WRITE(dsi, DSIM_MSYNC_REG, reg);
}
+ reg = DSIM_MAIN_HRESOL(vm->hactive, num_bits_resol) |
+ DSIM_MAIN_VRESOL(vm->vactive, num_bits_resol);
- reg = DSIM_MAIN_HRESOL(vm->hactive) | DSIM_MAIN_VRESOL(vm->vactive);
DSI_WRITE(dsi, DSIM_MDRESOL_REG, reg);
dev_dbg(dsi->dev, "LCD size = %dx%d\n", vm->hactive, vm->vactive);
@@ -1137,10 +1228,13 @@ static void exynos_dsi_disable_irq(struct exynos_dsi *dsi)
static int exynos_dsi_init(struct exynos_dsi *dsi)
{
+ struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
+
exynos_dsi_reset(dsi);
exynos_dsi_enable_irq(dsi);
exynos_dsi_enable_clock(dsi);
- exynos_dsi_wait_for_reset(dsi);
+ if (driver_data->wait_for_reset)
+ exynos_dsi_wait_for_reset(dsi);
exynos_dsi_set_phy_ctrl(dsi);
exynos_dsi_init_link(dsi);
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v5 07/12] drm/exynos: dsi: make use of array for clock access
2015-04-10 5:55 [PATCH v5 00/12] Add drivers for Exynos5433 display Hyungwon Hwang
` (4 preceding siblings ...)
2015-04-10 5:55 ` [PATCH v5 06/12] drm/exynos: dsi: make use of driver data for static values Hyungwon Hwang
@ 2015-04-10 5:55 ` Hyungwon Hwang
2015-04-10 5:55 ` [PATCH v5 08/12] drm/exynos: dsi: add support for Exynos5433 Hyungwon Hwang
` (3 subsequent siblings)
9 siblings, 0 replies; 16+ messages in thread
From: Hyungwon Hwang @ 2015-04-10 5:55 UTC (permalink / raw)
To: dri-devel, devicetree, inki.dae, daniel
Cc: dh09.lee, sw0312.kim, Hyungwon Hwang, cw00.choi
This patch make the driver to use an array for clock access. The number
of clocks are different from the existing MIPI DSI driver and Exynos5433
MIPI DSI driver. So this patch is needed before adding support for
Exynos5433 MIPI DSI driver.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
---
Changes for v5:
- Newly added
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 64 +++++++++++++++------------------
1 file changed, 29 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 83e6798..b78d5f5 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -208,6 +208,8 @@
REG_ADDR((dsi), (reg_idx)))
#define DSI_READ(dsi, reg_idx) readl(REG_ADDR((dsi), (reg_idx)))
+static char *clk_names[2] = { "bus_clk", "sclk_mipi" };
+
enum exynos_dsi_transfer_type {
EXYNOS_DSI_TX,
EXYNOS_DSI_RX,
@@ -256,8 +258,7 @@ struct exynos_dsi {
void __iomem *reg_base;
struct phy *phy;
- struct clk *sclk_clk;
- struct clk *bus_clk;
+ struct clk **clks;
struct regulator_bulk_data supplies[2];
int irq;
int te_gpio;
@@ -1383,7 +1384,8 @@ static const struct mipi_dsi_host_ops exynos_dsi_ops = {
static int exynos_dsi_poweron(struct exynos_dsi *dsi)
{
- int ret;
+ struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
+ int ret, i;
ret = regulator_bulk_enable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
if (ret < 0) {
@@ -1391,31 +1393,23 @@ static int exynos_dsi_poweron(struct exynos_dsi *dsi)
return ret;
}
- ret = clk_prepare_enable(dsi->bus_clk);
- if (ret < 0) {
- dev_err(dsi->dev, "cannot enable bus clock %d\n", ret);
- goto err_bus_clk;
- }
-
- ret = clk_prepare_enable(dsi->sclk_clk);
- if (ret < 0) {
- dev_err(dsi->dev, "cannot enable pll clock %d\n", ret);
- goto err_sclk_clk;
+ for (i = 0; i < driver_data->num_clks; i++) {
+ ret = clk_prepare_enable(dsi->clks[i]);
+ if (ret < 0)
+ goto err_clk;
}
ret = phy_power_on(dsi->phy);
if (ret < 0) {
dev_err(dsi->dev, "cannot enable phy %d\n", ret);
- goto err_phy;
+ goto err_clk;
}
return 0;
-err_phy:
- clk_disable_unprepare(dsi->sclk_clk);
-err_sclk_clk:
- clk_disable_unprepare(dsi->bus_clk);
-err_bus_clk:
+err_clk:
+ while (--i > -1)
+ clk_disable_unprepare(dsi->clks[i]);
regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
return ret;
@@ -1423,7 +1417,8 @@ err_bus_clk:
static void exynos_dsi_poweroff(struct exynos_dsi *dsi)
{
- int ret;
+ struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
+ int ret, i;
usleep_range(10000, 20000);
@@ -1439,8 +1434,8 @@ static void exynos_dsi_poweroff(struct exynos_dsi *dsi)
phy_power_off(dsi->phy);
- clk_disable_unprepare(dsi->sclk_clk);
- clk_disable_unprepare(dsi->bus_clk);
+ for (i = driver_data->num_clks - 1; i > -1; i--)
+ clk_disable_unprepare(dsi->clks[i]);
ret = regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
if (ret < 0)
@@ -1762,7 +1757,7 @@ static int exynos_dsi_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct resource *res;
struct exynos_dsi *dsi;
- int ret;
+ int ret, i;
dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
if (!dsi)
@@ -1802,18 +1797,17 @@ static int exynos_dsi_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
}
- dsi->sclk_clk = devm_clk_get(dev, "sclk_mipi");
- if (IS_ERR(dsi->sclk_clk)) {
- dev_info(dev, "failed to get dsi sclk clock\n");
- ret = PTR_ERR(dsi->sclk_clk);
- goto err_del_component;
- }
-
- dsi->bus_clk = devm_clk_get(dev, "bus_clk");
- if (IS_ERR(dsi->bus_clk)) {
- dev_info(dev, "failed to get dsi bus clock\n");
- ret = PTR_ERR(dsi->bus_clk);
- goto err_del_component;
+ dsi->clks = devm_kzalloc(dev,
+ sizeof(*dsi->clks) * dsi->driver_data->num_clks,
+ GFP_KERNEL);
+ for (i = 0; i < dsi->driver_data->num_clks; i++) {
+ dsi->clks[i] = devm_clk_get(dev, clk_names[i]);
+ if (IS_ERR(dsi->clks[i])) {
+ dev_info(dev, "failed to get the clock: %s\n",
+ clk_names[i]);
+ ret = PTR_ERR(dsi->clks[i]);
+ goto err_del_component;
+ }
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v5 08/12] drm/exynos: dsi: add support for Exynos5433
2015-04-10 5:55 [PATCH v5 00/12] Add drivers for Exynos5433 display Hyungwon Hwang
` (5 preceding siblings ...)
2015-04-10 5:55 ` [PATCH v5 07/12] drm/exynos: dsi: make use of array for clock access Hyungwon Hwang
@ 2015-04-10 5:55 ` Hyungwon Hwang
2015-04-10 5:55 ` [PATCH v5 09/12] drm/exynos: dsi: add the backward compatibility for the renamed clock Hyungwon Hwang
` (2 subsequent siblings)
9 siblings, 0 replies; 16+ messages in thread
From: Hyungwon Hwang @ 2015-04-10 5:55 UTC (permalink / raw)
To: dri-devel, devicetree, inki.dae, daniel
Cc: dh09.lee, sw0312.kim, Hyungwon Hwang, cw00.choi
This patch adds support for Exynos5433 mipi dsi.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
---
Changes for v2:
- change the author of "drm/exynos: dsi: add support for Exynos5433 SoC" to
Hyungwon Hwang by the previous author's will
Changes for v3:
- Separated from the patch "drm/exynos: dsi: add support for Exynos5433 SoC"
in version 2.
- use defines for more readable code
- fix typos
Changes for v4:
- None
Changes for v5:
- None
.../devicetree/bindings/video/exynos_dsim.txt | 1 +
drivers/gpu/drm/exynos/Kconfig | 2 +-
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 69 +++++++++++++++++++++-
3 files changed, 68 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/video/exynos_dsim.txt b/Documentation/devicetree/bindings/video/exynos_dsim.txt
index 44659dd..11ccac9 100644
--- a/Documentation/devicetree/bindings/video/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dsim.txt
@@ -6,6 +6,7 @@ Required properties:
"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
"samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */
"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
+ "samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
- reg: physical base address and length of the registers set for the device
- interrupts: should contain DSI interrupt
- clocks: list of clock specifiers, must contain an entry for each required
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index 3f649ab..4e4182b 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -47,7 +47,7 @@ config DRM_EXYNOS_DPI
config DRM_EXYNOS_DSI
bool "EXYNOS DRM MIPI-DSI driver support"
- depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS7_DECON)
+ depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS5433_DECON || DRM_EXYNOS7_DECON)
select DRM_MIPI_DSI
select DRM_PANEL
default n
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index b78d5f5..5f03680 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -131,6 +131,7 @@
#define DSIM_INT_PLL_STABLE (1 << 31)
#define DSIM_INT_SW_RST_RELEASE (1 << 30)
#define DSIM_INT_SFR_FIFO_EMPTY (1 << 29)
+#define DSIM_INT_SFR_HDR_FIFO_EMPTY (1 << 28)
#define DSIM_INT_BTA (1 << 25)
#define DSIM_INT_FRAME_DONE (1 << 24)
#define DSIM_INT_RX_TIMEOUT (1 << 21)
@@ -179,6 +180,8 @@
/* DSIM_PHYCTRL */
#define DSIM_PHYCTRL_ULPS_EXIT(x) (((x) & 0x1ff) << 0)
+#define DSIM_PHYCTRL_B_DPHYCTL_VREG_LP (1 << 30)
+#define DSIM_PHYCTRL_B_DPHYCTL_SLEW_UP (1 << 14)
/* DSIM_PHYTIMING */
#define DSIM_PHYTIMING_LPX(x) ((x) << 8)
@@ -208,7 +211,9 @@
REG_ADDR((dsi), (reg_idx)))
#define DSI_READ(dsi, reg_idx) readl(REG_ADDR((dsi), (reg_idx)))
-static char *clk_names[2] = { "bus_clk", "sclk_mipi" };
+static char *clk_names[5] = { "bus_clk", "sclk_mipi",
+ "phyclk_mipidphy0_bitclkdiv8", "phyclk_mipidphy0_rxclkesc0",
+ "sclk_rgb_vclk_to_dsim0" };
enum exynos_dsi_transfer_type {
EXYNOS_DSI_TX,
@@ -337,6 +342,30 @@ static unsigned int exynos_reg_ofs[] = {
[DSIM_PHYTIMING2_REG] = 0x6c,
};
+static unsigned int exynos5433_reg_ofs[] = {
+ [DSIM_STATUS_REG] = 0x04,
+ [DSIM_SWRST_REG] = 0x0C,
+ [DSIM_CLKCTRL_REG] = 0x10,
+ [DSIM_TIMEOUT_REG] = 0x14,
+ [DSIM_CONFIG_REG] = 0x18,
+ [DSIM_ESCMODE_REG] = 0x1C,
+ [DSIM_MDRESOL_REG] = 0x20,
+ [DSIM_MVPORCH_REG] = 0x24,
+ [DSIM_MHPORCH_REG] = 0x28,
+ [DSIM_MSYNC_REG] = 0x2C,
+ [DSIM_INTSRC_REG] = 0x34,
+ [DSIM_INTMSK_REG] = 0x38,
+ [DSIM_PKTHDR_REG] = 0x3C,
+ [DSIM_PAYLOAD_REG] = 0x40,
+ [DSIM_RXFIFO_REG] = 0x44,
+ [DSIM_FIFOCTRL_REG] = 0x4C,
+ [DSIM_PLLCTRL_REG] = 0x94,
+ [DSIM_PHYCTRL_REG] = 0xA4,
+ [DSIM_PHYTIMING_REG] = 0xB4,
+ [DSIM_PHYTIMING1_REG] = 0xB8,
+ [DSIM_PHYTIMING2_REG] = 0xBC,
+};
+
enum reg_value_idx {
RESET_TYPE,
PLL_TIMER,
@@ -373,6 +402,24 @@ static unsigned int reg_values[] = {
[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0b),
};
+static unsigned int exynos5433_reg_values[] = {
+ [RESET_TYPE] = DSIM_FUNCRST,
+ [PLL_TIMER] = 22200,
+ [STOP_STATE_CNT] = 0xa,
+ [PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0x190),
+ [PHYCTRL_VREG_LP] = DSIM_PHYCTRL_B_DPHYCTL_VREG_LP,
+ [PHYCTRL_SLEW_UP] = DSIM_PHYCTRL_B_DPHYCTL_SLEW_UP,
+ [PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x07),
+ [PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0c),
+ [PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x09),
+ [PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x2d),
+ [PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0e),
+ [PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x09),
+ [PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x0b),
+ [PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x10),
+ [PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0c),
+};
+
static struct exynos_dsi_driver_data exynos3_dsi_driver_data = {
.reg_ofs = exynos_reg_ofs,
.plltmr_reg = 0x50,
@@ -418,6 +465,17 @@ static struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
.reg_values = reg_values,
};
+static struct exynos_dsi_driver_data exynos5433_dsi_driver_data = {
+ .reg_ofs = exynos5433_reg_ofs,
+ .plltmr_reg = 0xa0,
+ .has_clklane_stop = 1,
+ .num_clks = 5,
+ .max_freq = 1500,
+ .wait_for_reset = 0,
+ .num_bits_resol = 12,
+ .reg_values = exynos5433_reg_values,
+};
+
static struct of_device_id exynos_dsi_of_match[] = {
{ .compatible = "samsung,exynos3250-mipi-dsi",
.data = &exynos3_dsi_driver_data },
@@ -427,6 +485,8 @@ static struct of_device_id exynos_dsi_of_match[] = {
.data = &exynos4415_dsi_driver_data },
{ .compatible = "samsung,exynos5410-mipi-dsi",
.data = &exynos5_dsi_driver_data },
+ { .compatible = "samsung,exynos5433-mipi-dsi",
+ .data = &exynos5433_dsi_driver_data },
{ }
};
@@ -1185,13 +1245,16 @@ static irqreturn_t exynos_dsi_irq(int irq, void *dev_id)
DSI_WRITE(dsi, DSIM_INTSRC_REG, status);
if (status & DSIM_INT_SW_RST_RELEASE) {
- u32 mask = ~(DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY);
+ u32 mask = ~(DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY |
+ DSIM_INT_SFR_HDR_FIFO_EMPTY | DSIM_INT_FRAME_DONE |
+ DSIM_INT_RX_ECC_ERR | DSIM_INT_SW_RST_RELEASE);
DSI_WRITE(dsi, DSIM_INTMSK_REG, mask);
complete(&dsi->completed);
return IRQ_HANDLED;
}
- if (!(status & (DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY)))
+ if (!(status & (DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY |
+ DSIM_INT_FRAME_DONE | DSIM_INT_PLL_STABLE)))
return IRQ_HANDLED;
if (exynos_dsi_transfer_finish(dsi))
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v5 09/12] drm/exynos: dsi: add the backward compatibility for the renamed clock
2015-04-10 5:55 [PATCH v5 00/12] Add drivers for Exynos5433 display Hyungwon Hwang
` (6 preceding siblings ...)
2015-04-10 5:55 ` [PATCH v5 08/12] drm/exynos: dsi: add support for Exynos5433 Hyungwon Hwang
@ 2015-04-10 5:55 ` Hyungwon Hwang
2015-04-10 5:55 ` [PATCH v5 11/12] drm/exynos: dsi: do not set TE GPIO direction by input Hyungwon Hwang
2015-04-10 5:55 ` [PATCH v5 12/12] ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi' Hyungwon Hwang
9 siblings, 0 replies; 16+ messages in thread
From: Hyungwon Hwang @ 2015-04-10 5:55 UTC (permalink / raw)
To: dri-devel, devicetree, inki.dae, daniel
Cc: dh09.lee, sw0312.kim, Hyungwon Hwang, cw00.choi
From the commit a45abd04a46048a4956408543cdbdd8bdedd3215
("drm/exynos: dsi: rename pll_clk to sclk_clk'), the compiled dtb
which contains 'pll_clk' becomes not compatible with the current DSI
driver. This patch adds the backward compatibility for this issue.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
---
Changes for v5:
- Newly added
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 5f03680..ddcb77e 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -211,6 +211,8 @@
REG_ADDR((dsi), (reg_idx)))
#define DSI_READ(dsi, reg_idx) readl(REG_ADDR((dsi), (reg_idx)))
+#define OLD_SCLK_MIPI_CLK_NAME "pll_clk"
+
static char *clk_names[5] = { "bus_clk", "sclk_mipi",
"phyclk_mipidphy0_bitclkdiv8", "phyclk_mipidphy0_rxclkesc0",
"sclk_rgb_vclk_to_dsim0" };
@@ -1866,6 +1868,12 @@ static int exynos_dsi_probe(struct platform_device *pdev)
for (i = 0; i < dsi->driver_data->num_clks; i++) {
dsi->clks[i] = devm_clk_get(dev, clk_names[i]);
if (IS_ERR(dsi->clks[i])) {
+ if (strcmp(clk_names[i], "sclk_mipi") == 0) {
+ strcpy(clk_names[i], OLD_SCLK_MIPI_CLK_NAME);
+ i--;
+ continue;
+ }
+
dev_info(dev, "failed to get the clock: %s\n",
clk_names[i]);
ret = PTR_ERR(dsi->clks[i]);
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v5 11/12] drm/exynos: dsi: do not set TE GPIO direction by input
2015-04-10 5:55 [PATCH v5 00/12] Add drivers for Exynos5433 display Hyungwon Hwang
` (7 preceding siblings ...)
2015-04-10 5:55 ` [PATCH v5 09/12] drm/exynos: dsi: add the backward compatibility for the renamed clock Hyungwon Hwang
@ 2015-04-10 5:55 ` Hyungwon Hwang
2015-04-10 5:55 ` [PATCH v5 12/12] ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi' Hyungwon Hwang
9 siblings, 0 replies; 16+ messages in thread
From: Hyungwon Hwang @ 2015-04-10 5:55 UTC (permalink / raw)
To: dri-devel, devicetree, inki.dae, daniel
Cc: dh09.lee, sw0312.kim, Hyungwon Hwang, cw00.choi
On some board, TE GPIO should be configured properly thoughout pinctrl driver
as an wakeup interrupt. So this gpio should be configurable in the board's DT,
not being requested as a input pin.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
---
Changes for v2:
- None
Changes for v3:
- None
Changes for v4:
- None
Changes for v5:
- None
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index d5a3baf..5aee4b1 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1321,15 +1321,15 @@ static int exynos_dsi_register_te_irq(struct exynos_dsi *dsi)
goto out;
}
- ret = gpio_request_one(dsi->te_gpio, GPIOF_IN, "te_gpio");
+ ret = gpio_request(dsi->te_gpio, "te_gpio");
if (ret) {
dev_err(dsi->dev, "gpio request failed with %d\n", ret);
goto out;
}
te_gpio_irq = gpio_to_irq(dsi->te_gpio);
-
irq_set_status_flags(te_gpio_irq, IRQ_NOAUTOEN);
+
ret = request_threaded_irq(te_gpio_irq, exynos_dsi_te_irq_handler, NULL,
IRQF_TRIGGER_RISING, "TE", dsi);
if (ret) {
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v5 12/12] ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi'
2015-04-10 5:55 [PATCH v5 00/12] Add drivers for Exynos5433 display Hyungwon Hwang
` (8 preceding siblings ...)
2015-04-10 5:55 ` [PATCH v5 11/12] drm/exynos: dsi: do not set TE GPIO direction by input Hyungwon Hwang
@ 2015-04-10 5:55 ` Hyungwon Hwang
9 siblings, 0 replies; 16+ messages in thread
From: Hyungwon Hwang @ 2015-04-10 5:55 UTC (permalink / raw)
To: dri-devel, devicetree, inki.dae, daniel
Cc: dh09.lee, sw0312.kim, Hyungwon Hwang, cw00.choi
The clock which was named as 'pll_clk' is actually not the clock source
of PLL in MIPI DSI. This patch fixes this disagreement.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
---
Changes for v5:
- Newly added
arch/arm/boot/dts/exynos4.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 77ea547..ad23675 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -164,7 +164,7 @@
phys = <&mipi_phy 1>;
phy-names = "dsim";
clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
- clock-names = "bus_clk", "pll_clk";
+ clock-names = "bus_clk", "sclk_mipi";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread