From: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
To: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>
Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
marex-ynQEQJNshbs@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
harald-95f8Dae0BrPYtjvyW6yDsg@public.gmane.org
Subject: Re: [PATCH] ARM: dts: imx23-olinuxino: Fix dr_mode of usb0
Date: Wed, 15 Apr 2015 11:32:12 +0800 [thread overview]
Message-ID: <20150415033211.GB29095@shlinux2> (raw)
In-Reply-To: <1429043846-28731-1-git-send-email-stefan.wahren-eS4NqCHxEME@public.gmane.org>
On Tue, Apr 14, 2015 at 08:37:26PM +0000, Stefan Wahren wrote:
> The dr_mode of usb0 on imx233-olinuxino is left to default "otg".
> Since the green LED (GPIO2_1) on imx233-olinuxino is connected to the
> same pin as USB_OTG_ID it's possible to disable USB host by LED toggling:
>
> echo 0 > /sys/class/leds/green/brightness
> [ 1068.890000] ci_hdrc ci_hdrc.0: remove, state 1
> [ 1068.890000] usb usb1: USB disconnect, device number 1
> [ 1068.920000] usb 1-1: USB disconnect, device number 2
> [ 1068.920000] usb 1-1.1: USB disconnect, device number 3
> [ 1069.070000] usb 1-1.2: USB disconnect, device number 4
> [ 1069.450000] ci_hdrc ci_hdrc.0: USB bus 1 deregistered
> [ 1074.460000] ci_hdrc ci_hdrc.0: timeout waiting for 00000800 in 11
>
> This patch fixes the issue by setting dr_mode to "host" in the dts file.
>
> Reported-by: Harald Geyer <harald-95f8Dae0BrPYtjvyW6yDsg@public.gmane.org>
> Signed-off-by: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>
> ---
> arch/arm/boot/dts/imx23-olinuxino.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
> index 7e6eef2..3b2d74d 100644
> --- a/arch/arm/boot/dts/imx23-olinuxino.dts
> +++ b/arch/arm/boot/dts/imx23-olinuxino.dts
> @@ -93,6 +93,7 @@
>
> ahb@80080000 {
> usb0: usb@80080000 {
> + dr_mode = "host";
> vbus-supply = <®_usb0_vbus>;
> status = "okay";
> };
> --
> 1.7.9.5
>
If this board has only host function, I am ok for it.
Acked-by: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-04-15 3:32 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-14 20:37 [PATCH] ARM: dts: imx23-olinuxino: Fix dr_mode of usb0 Stefan Wahren
[not found] ` <1429043846-28731-1-git-send-email-stefan.wahren-eS4NqCHxEME@public.gmane.org>
2015-04-14 20:43 ` Fabio Estevam
2015-04-15 2:59 ` Marek Vasut
2015-04-15 3:32 ` Peter Chen [this message]
2015-04-15 19:11 ` Stefan Wahren
2015-04-27 12:26 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150415033211.GB29095@shlinux2 \
--to=peter.chen-kzfg59tc24xl57midrcfdg@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=harald-95f8Dae0BrPYtjvyW6yDsg@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=marex-ynQEQJNshbs@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=stefan.wahren-eS4NqCHxEME@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).