[PATCH v3 00/17] crypto: talitos - Add support for SEC1

[PATCH v3 00/17] crypto: talitos - Add support for SEC1

[Christophe Leroy]

The purpose of this set of patchs is to add to talitos crypto driver
the support for the SEC1 version of the security engine, which is
found in mpc885 and mpc8272 processors.

v3 is a complete rework of the patchset. Since a kernel can be built
with support for both MPC82xx and MPC83xx at the same time, talitos
driver shall support both SEC1 and SEC2+ at the same time.

Based on cryptodev-2.6 tree

Christophe Leroy (17):
  crypto: talitos - Use zero entry to init descriptors ptrs to zero
  crypto: talitos - Refactor the sg in/out chain allocation
  crypto: talitos - talitos_ptr renamed ptr for more lisibility
  crypto: talitos - Add a helper function to clear j_extent field
  crypto: talitos - remove param 'extent' in map_single_talitos_ptr()
  crypto: talitos - helper function for ptr len
  crypto: talitos - enhanced talitos_desc struct for SEC1
  crypto: talitos - add sub-choice in talitos CONFIG for SEC1
  crypto: talitos - Add a feature to tag SEC1
  crypto: talitos - fill in talitos descriptor iaw SEC1 or SEC2+
  crypto: talitos - adaptation of talitos_submit() for SEC1
  crypto: talitos - base address for Execution Units
  crypto: talitos - adapt interrupts and reset functions to SEC1
  crypto: talitos - implement scatter/gather copy for SEC1
  crypto: talitos - SEC1 bugs on 0 data hash
  crypto: talitos - Add fsl,sec1.0 compatible
  crypto: talitos - Update DT bindings with SEC1

 .../devicetree/bindings/crypto/fsl-sec2.txt        |   6 +-
 drivers/crypto/Kconfig                             |  18 +
 drivers/crypto/talitos.c                           | 727 +++++++++++++++------
 drivers/crypto/talitos.h                           | 153 +++--
 4 files changed, 644 insertions(+), 260 deletions(-)

-- 
2.1.0

Re: [PATCH v3 00/17] crypto: talitos - Add support for SEC1

[Olaf Hering]

On Fri, Apr 17, Christophe Leroy wrote:

> v3 is a complete rework of the patchset. Since a kernel can be built
> with support for both MPC82xx and MPC83xx at the same time, talitos
> driver shall support both SEC1 and SEC2+ at the same time.

The used git send-email command lacked the --thread option.

>From this perspective: NACK to the whole series...

Olaf

Re: [PATCH v3 00/17] crypto: talitos - Add support for SEC1

[Herbert Xu]

On Fri, Apr 17, 2015 at 04:31:47PM +0200, Christophe Leroy wrote:
> The purpose of this set of patchs is to add to talitos crypto driver
> the support for the SEC1 version of the security engine, which is
> found in mpc885 and mpc8272 processors.
> 
> v3 is a complete rework of the patchset. Since a kernel can be built
> with support for both MPC82xx and MPC83xx at the same time, talitos
> driver shall support both SEC1 and SEC2+ at the same time.
> 
> Based on cryptodev-2.6 tree

All applied.
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

[PATCH v3 00/17] crypto: talitos - Add support for SEC1

[Christophe Leroy]

The purpose of this set of patchs is to add to talitos crypto driver
the support for the SEC1 version of the security engine, which is
found in mpc885 and mpc8272 processors.

v3 is a complete rework of the patchset. Since a kernel can be built
with support for both MPC82xx and MPC83xx at the same time, talitos
driver shall support both SEC1 and SEC2+ at the same time.

Based on cryptodev-2.6 tree

Christophe Leroy (17):
  crypto: talitos - Use zero entry to init descriptors ptrs to zero
  crypto: talitos - Refactor the sg in/out chain allocation
  crypto: talitos - talitos_ptr renamed ptr for more lisibility
  crypto: talitos - Add a helper function to clear j_extent field
  crypto: talitos - remove param 'extent' in map_single_talitos_ptr()
  crypto: talitos - helper function for ptr len
  crypto: talitos - enhanced talitos_desc struct for SEC1
  crypto: talitos - add sub-choice in talitos CONFIG for SEC1
  crypto: talitos - Add a feature to tag SEC1
  crypto: talitos - fill in talitos descriptor iaw SEC1 or SEC2+
  crypto: talitos - adaptation of talitos_submit() for SEC1
  crypto: talitos - base address for Execution Units
  crypto: talitos - adapt interrupts and reset functions to SEC1
  crypto: talitos - implement scatter/gather copy for SEC1
  crypto: talitos - SEC1 bugs on 0 data hash
  crypto: talitos - Add fsl,sec1.0 compatible
  crypto: talitos - Update DT bindings with SEC1

 .../devicetree/bindings/crypto/fsl-sec2.txt        |   6 +-
 drivers/crypto/Kconfig                             |  18 +
 drivers/crypto/talitos.c                           | 727 +++++++++++++++------
 drivers/crypto/talitos.h                           | 153 +++--
 4 files changed, 644 insertions(+), 260 deletions(-)

-- 
2.1.0

Re: [PATCH v3 00/17] crypto: talitos - Add support for SEC1

[leroy christophe]

Oops, this is the first time I use directly the output of git 
format-patch into sendmail, and
it looks like the mails are dated with the commit date, not today's date.

I will resend now with today's date. Sorry for the noise.

Christophe

Le 17/04/2015 15:47, Christophe Leroy a écrit :
> The purpose of this set of patchs is to add to talitos crypto driver
> the support for the SEC1 version of the security engine, which is
> found in mpc885 and mpc8272 processors.
>
> v3 is a complete rework of the patchset. Since a kernel can be built
> with support for both MPC82xx and MPC83xx at the same time, talitos
> driver shall support both SEC1 and SEC2+ at the same time.
>
> Based on cryptodev-2.6 tree
>
> Christophe Leroy (17):
>    crypto: talitos - Use zero entry to init descriptors ptrs to zero
>    crypto: talitos - Refactor the sg in/out chain allocation
>    crypto: talitos - talitos_ptr renamed ptr for more lisibility
>    crypto: talitos - Add a helper function to clear j_extent field
>    crypto: talitos - remove param 'extent' in map_single_talitos_ptr()
>    crypto: talitos - helper function for ptr len
>    crypto: talitos - enhanced talitos_desc struct for SEC1
>    crypto: talitos - add sub-choice in talitos CONFIG for SEC1
>    crypto: talitos - Add a feature to tag SEC1
>    crypto: talitos - fill in talitos descriptor iaw SEC1 or SEC2+
>    crypto: talitos - adaptation of talitos_submit() for SEC1
>    crypto: talitos - base address for Execution Units
>    crypto: talitos - adapt interrupts and reset functions to SEC1
>    crypto: talitos - implement scatter/gather copy for SEC1
>    crypto: talitos - SEC1 bugs on 0 data hash
>    crypto: talitos - Add fsl,sec1.0 compatible
>    crypto: talitos - Update DT bindings with SEC1
>
>   .../devicetree/bindings/crypto/fsl-sec2.txt        |   6 +-
>   drivers/crypto/Kconfig                             |  18 +
>   drivers/crypto/talitos.c                           | 727 +++++++++++++++------
>   drivers/crypto/talitos.h                           | 153 +++--
>   4 files changed, 644 insertions(+), 260 deletions(-)
>