From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Ripard Subject: Re: [PATCH v2] ARM: dts: sun7i: Add dts file for the Jesurun Q5 top set box Date: Thu, 23 Apr 2015 22:30:24 +0200 Message-ID: <20150423203024.GG28007@lukather> References: <1429792010-22359-1-git-send-email-hdegoede@redhat.com> Reply-To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="XRI2XbIfl/05pQwm" Return-path: Content-Disposition: inline In-Reply-To: <1429792010-22359-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Hans de Goede Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree , linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org --XRI2XbIfl/05pQwm Content-Type: text/plain; charset=UTF-8 Content-Disposition: inline On Thu, Apr 23, 2015 at 02:26:50PM +0200, Hans de Goede wrote: > The Jesurun Q5 has a black plastic casing with the approximate dimensions > of 100mm x 100mm x 24mm with rounded edges. In terms of hardware it > features an Allwinner A10 SoC with 1GB RAM and 8GB of NAND flash. The > external connectors are: 2x USB-A female supporting USB2.0, 3.5mm female > jack for audio, HDMI female, SPDIF, RJ45 LAN and Power. In addition the > device has 1x red LED (hard wired to power) and an programmable green led. > On the board there is also an unpopulated IR receiver and the UART. > The devices is equipped with an AXP209 PMU. > > For more details see: http://linux-sunxi.org/Jesurun_Q5 > > Signed-off-by: Hans de Goede Queued for 4.2, thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com --XRI2XbIfl/05pQwm--