Re: [PATCH v7 0/9] mfd: watchdog: rtc: New driver for ST's LPC IP

[Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]

> [Alessandro: This just needs RTC Acks now]

Given this patch-set has been on the list for some time now and we
haven't heard from Alessandro in all that time, I'm going to just
apply the set and send out a pull-request to the other Maintainers.

No point waiting any longer IMHO.

> ST's Low Power Controller (LPC) controls two devices; watchdog and RTC.
> Only one of the devices can be used at any one time, which is enforced
> by the Device Driver model.
>  
> This driver set provides everything you need to choose one (and only
> one) of the LPC devices to run per I/P block, of which there are two
> on the enabled STiH407 h/w.
> 
> Version 7:
>  - Fix 2 legacy typos in the binding documentation compatible string
>    examples.  
>  
> Version 6:
>  - RTC: GPL v2 => GPL to reflect the information in the header
>  - Applied another Reviewed-by from Guenter
>  
> Version 5:
>  - Disable WDT clock over suspend
>  - WDT: GPL v2 => GPL to reflect the information in the header
>  - Change module name in Kconfig help and file header
>  
> Version 4:
>  - Use {readl,writel}_relaxed() calls
>  - Add Guenter's Reviewed-by
>  - Rebased onto v4.0-rc1
>  
> Version 3:
>  - Move Regmap pointer into core device data structure
>  - Remove error message from devm_ioremap_resource
> 
> Version 2:
>  - Only calculate keepalive once in probe()
>  - Check for a 0 clk_rate
>  - Set limits using predefined attributes from watchdog_device
>  - CONFIG_PM => CONFIG_SLEEP
>  - Call st_wdog_setup() on resume
>  - Remove MFD driver -- instead rely on driver probing mechanism
>    which continues attempting to bind to different drivers until
>    one does not return -ENODEV
> 
> Lee Jones (9):
>   mfd: dt-bindings: Provide human readable defines for LPC mode choosing
>   ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog
>   ARM: multi_v7_defconfig: Enable support for ST's LPC RTC
>   ARM: STi: DT: STiH407: Add Device Tree node for the LPC
>   watchdog: bindings: Provide ST bindings for ST's LPC Watchdog device
>   watchdog: st_wdt: Add new driver for ST's LPC Watchdog
>   rtc: bindings: Provide ST bindings for ST's LPC RTC device
>   rtc: st: add new driver for ST's LPC RTC
>   MAINTAINERS: Add Watchdog and RTC files to STI's maintainer entry
> 
>  .../devicetree/bindings/rtc/rtc-st-lpc.txt         |  25 ++
>  .../devicetree/bindings/watchdog/st_lpc_wdt.txt    |  38 +++
>  MAINTAINERS                                        |   2 +
>  arch/arm/boot/dts/stih407-family.dtsi              |  20 ++
>  arch/arm/configs/multi_v7_defconfig                |   2 +
>  drivers/rtc/Kconfig                                |  12 +
>  drivers/rtc/Makefile                               |   1 +
>  drivers/rtc/rtc-st-lpc.c                           | 354 +++++++++++++++++++++
>  drivers/watchdog/Kconfig                           |  13 +
>  drivers/watchdog/Makefile                          |   1 +
>  drivers/watchdog/st_lpc_wdt.c                      | 344 ++++++++++++++++++++
>  include/dt-bindings/mfd/st-lpc.h                   |  15 +
>  12 files changed, 827 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt
>  create mode 100644 Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
>  create mode 100644 drivers/rtc/rtc-st-lpc.c
>  create mode 100644 drivers/watchdog/st_lpc_wdt.c
>  create mode 100644 include/dt-bindings/mfd/st-lpc.h
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html