From: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Andrew Bresticker <abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
Thierry Reding
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Alexandre Courbot
<gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Subject: Re: [PATCH V7 4/9] mfd: Add binding document for NVIDIA Tegra XUSB
Date: Wed, 29 Apr 2015 19:34:29 +0100 [thread overview]
Message-ID: <20150429183429.GB9169@x1> (raw)
In-Reply-To: <CAL1qeaFh5go_K0GnGXxU7KqjcgCm2kpUL5mVgGSYosPoXAXgpw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On Wed, 29 Apr 2015, Andrew Bresticker wrote:
> Lee,
>
> On Wed, Apr 29, 2015 at 2:25 AM, Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> > On Mon, 27 Apr 2015, Andrew Bresticker wrote:
> >
> >> Add a binding document for the XUSB host complex on NVIDIA Tegra124
> >> and later SoCs. The XUSB host complex includes a mailbox for
> >> communication with the XUSB micro-controller and an xHCI host-controller.
> >>
> >> Signed-off-by: Andrew Bresticker <abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
> >> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> >> Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
> >> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
> >> Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
> >> Cc: Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
> >> Cc: Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> >> Cc: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> >> ---
> >> New for v7.
> >> ---
> >> .../bindings/mfd/nvidia,tegra124-xusb.txt | 46 ++++++++++++++++++++++
> >> 1 file changed, 46 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
> >>
> >> diff --git a/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
> >> new file mode 100644
> >> index 0000000..6a46680
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
> >> @@ -0,0 +1,46 @@
> >> +NVIDIA Tegra XUSB host copmlex
> >> +==============================
> >> +
> >> +The XUSB host complex on Tegra124 and later SoCs contains an xHCI host
> >> +controller and a mailbox for communication with the XUSB micro-controller.
> >> +
> >> +Required properties:
> >> +--------------------
> >> + - compatible: For Tegra124, must contain "nvidia,tegra124-xusb".
> >> + Otherwise, must contain '"nvidia,<chip>-xusb", "nvidia,tegra124-xusb"'
> >> + where <chip> is tegra132.
> >
> > Okay. Why?
>
> Why what? This is the convention used for Tegra bindings and is also
> documented in Documentation/devicetree/bindings/submitting-patches.txt.
> See nvidia,tegra114-spi.txt and nvidia,tegra20-i2c.txt for other
> examples of this.
It seems strange to me that you'd mention two specific chips in one
compatible string. What's the purpose of that?
> >> + - reg: Must contain register base and length for each register set listed
> >> + in reg-names.
> >
> > You've mentioned 2 of the cells, what about the remaining 2?
>
> The example given was for Tegra124, where there are two address cells
> and two size cells.
I don't get that. How does that work?
> >> + - reg-names: Must include the following entries:
> >> + - xhci
> >> + - fpci
> >> + - ipfs
> >> + - interrupts: Must contain an interrupt for each entry in interrupt-names.
> >> + - interrupt-names: Must include the following entries:
> >> + - host
> >> + - smi
> >> + - pme
> >> +
> >> +Example:
> >> +--------
> >> + usb@0,70090000 {
> >> + compatible = "nvidia,tegra124-xusb";
> >> + reg = <0x0 0x70090000 0x0 0x8000>,
> >> + <0x0 0x70098000 0x0 0x1000>,
> >> + <0x0 0x70099000 0x0 0x1000>;
> >> + reg-names = "xhci", "fpci", "ipfs";
> >> + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 40 IRQ_TYPE_LEVEL_HGIH>,
> >> + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> >> + interrupt-names = "host", "smi", "pme";
> >
> > Are these resources used by both children?
>
> Only the FPCI register set is shared.
>
> > If not, place them into the children and ioremap() them from the
> > associated child drivers.
>
> Ok.
Great.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2015-04-29 18:34 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-27 22:37 [PATCH V7 0/9] Tegra xHCI support Andrew Bresticker
2015-04-27 22:37 ` [PATCH V7 1/9] xhci: Set shared HCD's hcd_priv in xhci_gen_setup Andrew Bresticker
[not found] ` <1430174242-29465-1-git-send-email-abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2015-04-27 22:37 ` [PATCH V7 2/9] mailbox: Make struct mbox_controller's ops field const Andrew Bresticker
[not found] ` <1430174242-29465-3-git-send-email-abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2015-04-28 16:49 ` Suman Anna
2015-04-27 22:37 ` [PATCH V7 3/9] mailbox: Fix up error handling in mbox_request_channel() Andrew Bresticker
2015-04-28 16:42 ` Suman Anna
2015-04-27 22:37 ` [PATCH V7 4/9] mfd: Add binding document for NVIDIA Tegra XUSB Andrew Bresticker
[not found] ` <1430174242-29465-5-git-send-email-abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2015-04-29 9:25 ` Lee Jones
2015-04-29 17:02 ` Andrew Bresticker
[not found] ` <CAL1qeaFh5go_K0GnGXxU7KqjcgCm2kpUL5mVgGSYosPoXAXgpw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-04-29 18:34 ` Lee Jones [this message]
2015-04-29 19:46 ` Andrew Bresticker
[not found] ` <CAL1qeaEt9kGbcCfwqhVzwJxx9DvgOnjfU6C8MCH6t0vqwJK0WA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-04-30 10:06 ` Lee Jones
2015-04-30 16:28 ` Andrew Bresticker
2015-04-27 22:37 ` [PATCH V7 5/9] mfd: Add driver " Andrew Bresticker
2015-04-29 9:23 ` Lee Jones
2015-04-29 17:59 ` Andrew Bresticker
2015-04-29 18:30 ` Lee Jones
2015-04-27 22:37 ` [PATCH V7 6/9] mailbox: Add NVIDIA Tegra XUSB mailbox binding Andrew Bresticker
2015-04-27 22:37 ` [PATCH V7 7/9] mailbox: Add NVIDIA Tegra XUSB mailbox driver Andrew Bresticker
2015-04-27 22:37 ` [PATCH V7 8/9] usb: Add NVIDIA Tegra xHCI controller binding Andrew Bresticker
2015-04-27 22:37 ` [PATCH V7 9/9] usb: xhci: Add NVIDIA Tegra xHCI host-controller driver Andrew Bresticker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150429183429.GB9169@x1 \
--to=lee.jones-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).