From mboxrd@z Thu Jan 1 00:00:00 1970 From: Leo Yan Subject: Re: [PATCH v5 1/3] dt-bindings: Document the hi6220 thermal sensor bindings Date: Wed, 20 May 2015 09:06:48 +0800 Message-ID: <20150520010648.GA18345@leoy-linaro> References: <1431933109-22764-1-git-send-email-kong.kongxinwei@hisilicon.com> <1431933109-22764-2-git-send-email-kong.kongxinwei@hisilicon.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1431933109-22764-2-git-send-email-kong.kongxinwei@hisilicon.com> Sender: linux-pm-owner@vger.kernel.org To: Xinwei Kong Cc: edubezval@gmail.com, rui.zhuang@intel.com, amit.kucheria@linaro.org, punit.agrawal@arm.com, Javi.Merino@arm.com, jorge.ramirez-ortiz@linaro.org, haojian.zhuang@linaro.org, linux-pm@vger.kernel.org, dan.zhao@hisilicon.com, devicetree@vger.kernel.org, gongyu@hisilicon.com, guodong.xu@linaro.org, robh@kernel.org, mark.rutland@arm.com, linuxarm@huawei.com, zhenwei.wang@hisilicon.com, mporter@konsulko.com, zhangfei.gao@linaro.org, liguozhu@hisilicon.com List-Id: devicetree@vger.kernel.org On Mon, May 18, 2015 at 03:11:47PM +0800, Xinwei Kong wrote: > From: kongxinwei > > This adds documentation of device tree bindings for the > thermal sensor controller of hi6220 SoC. > > Signed-off-by: Leo Yan > Signed-off-by: kongxinwei > --- > .../bindings/thermal/hisilicon-thermal.txt | 23 ++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt > > diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt > new file mode 100644 > index 0000000..b2a349f > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt > @@ -0,0 +1,23 @@ > +* Temperature Sensor on hisilicon SoCs > + > +** Required properties : > + > +- compatible: "hisilicon,tsensor". > +- reg: physical base address of thermal sensor and length of memory mapped > + region. > +- interrupt: The interrupt number to the cpu. Defines the interrupt used > + by SOCTHERM. s/SOCTHERM/tsensor/ > +- clock-names: Input clock name, should be 'thermal_clk'. > +- clocks: phandles for clock specified in "clock-names" property. > +- #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description. > + > +Example : > + > + tsensor: tsensor@0,f7030700 { > + compatible = "hisilicon,tsensor"; > + reg = <0x0 0xf7030700 0x0 0x1000>; > + interrupts = <0 7 0x4>; > + clocks = <&clock_sys HI6220_TSENSOR_CLK>; > + clock-names = "thermal_clk"; > + #thermal-sensor-cells = <1>; > + } > -- > 1.9.1 > >