From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Ripard Subject: Re: [PATCH v2 2/2] ARM: dts: sun7i: Add uart4 support for BananaPro, disable uart2 Date: Fri, 22 May 2015 21:24:40 +0200 Message-ID: <20150522192440.GH8557@lukather> References: <1432305184-8589-1-git-send-email-hdegoede@redhat.com> <1432305184-8589-2-git-send-email-hdegoede@redhat.com> Reply-To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="kr14OxHsRwZHHqxS" Return-path: Content-Disposition: inline In-Reply-To: <1432305184-8589-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Hans de Goede Cc: Michael Ring , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree , linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org --kr14OxHsRwZHHqxS Content-Type: text/plain; charset=UTF-8 Content-Disposition: inline On Fri, May 22, 2015 at 04:33:04PM +0200, Hans de Goede wrote: > From: Michael Ring > > The BananaPro uses uart4 for the default rx/tx pins on the 40 pins connector, > so enable uart4. > > Uart2 is also available at the bananapro io-pins, but like on the bananapi > the primary function of the pins is to act as gpios, see: > http://forum.lemaker.org/forum.php?mod=viewthread&tid=10852 > > Remove the uart2 node, people who want to use uart2 can do so with a > devicetree-overlay. > > Signed-off-by: Michael Ring > [hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org: Remove uart2 node] > Signed-off-by: Hans de Goede Applied both, thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com --kr14OxHsRwZHHqxS--