From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Lunn Subject: Re: [PATCHv2] ARM: mvebu: add support for the new Aramda 385 based Linksys boards Date: Mon, 25 May 2015 16:08:40 +0200 Message-ID: <20150525140840.GA8883@lunn.ch> References: <1432156456-440-1-git-send-email-kaloz@openwrt.org> <55631C6E.8050700@free-electrons.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <55631C6E.8050700-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Gregory CLEMENT Cc: Imre Kaloz , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org, thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org List-Id: devicetree@vger.kernel.org On Mon, May 25, 2015 at 02:58:22PM +0200, Gregory CLEMENT wrote: > Hi Imre, > > On 20/05/2015 23:14, Imre Kaloz wrote: > > This patch adds support for the Linksys WRT1200AC (Caiman) and > > the Linksys WRT1900AC v2 (Cobra). > > > > Both boards have: > > > > - 2 Marvell 88W8864 radios > > - 1 USB 3.0 port > > - 1 USB 2.0/eSATAp port > > - 2 Ethernet interfaces connected to a 88E6176 switch (1x WAN + 4x LAN) > > - 128MB NAND flash > > - 512MB RAM > > > > Signed-off-by: Imre Kaloz > > > > --- > > Changes since v1: added DSA support > > --- > > The only difference between the two boards is the radio configuration > > (2x2 vs 3x3), so everything except the leds (to be named properly) > > is in the dtsi file. When the wireless driver will be submitted > > upstream, the powertables (calibration data) will end up in the board > > specific files, tho. > > it seems that you missed my comment about removing bootargs and just using > stdout-path = "serial0:115200n8"; > > If you agree and if there is no remark about the DSA part from Andrew, I can > take car of it while applying your patch on mvebu/dt. DSA looks fine Acked-by: Andrew Lunn Thanks Andrew > > > Thanks, > > Gregory > > [...] > > > --- /dev/null > > +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi > > [...] > > > + chosen { > > + bootargs = "console=ttyS0,115200"; > > + stdout-path = &uart0; > Just here > > + }; > > > [...] > -- > Gregory Clement, Free Electrons > Kernel, drivers, real-time and embedded Linux > development, consulting, training and support. > http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html