Re: [PATCH v3 15/16] ARM: marvell/dt: add crypto node to armada 370 dtsi

[Boris Brezillon <boris.brezillon@free-electrons.com>]

On Tue, 26 May 2015 11:10:41 +0200
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote:

> Dear Boris Brezillon,
> 
> On Tue, 26 May 2015 11:03:45 +0200, Boris Brezillon wrote:
> 
> > > There is no clocks property. After a quick look on the datasheet, indeed I didn't
> > > find any clock which match the CESA. In this case you should update the binding
> > > documentation by adding that the clock is optional for armada-370-crypto.
> > 
> > Hm, actually the clock is defined in Marvell's LSP, but not described
> > in the datasheet. Which one should I trust :-) ?
> 
> I'd say: trust the reality. Declare the clock in the clock driver, but
> don't take a reference to it from your crypto driver. The kernel will
> disable it at the end of the boot. Check if crypto still works or not,
> and you'll get your answer :-)

Okay, you got me: I was to lazy to test that :-).
Anyway, I just did it, and apparently this clock is mandatory (the
platform hangs when launching crypto requests if the clock is not
referenced by the crypto device).

I'll send a patch adding this clock to the armada-370 clock driver and
I'll fix the dtsi accordingly.

Thanks,

Boris

> 
> Thomas



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com