From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shawn Guo Subject: Re: [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Date: Wed, 27 May 2015 11:06:37 +0800 Message-ID: <20150527030636.GB16165@dragon> References: <1432314867-30888-1-git-send-email-gary.bisson@boundarydevices.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1432314867-30888-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Gary Bisson , p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org, eric.nelson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org List-Id: devicetree@vger.kernel.org On Fri, May 22, 2015 at 07:14:25PM +0200, Gary Bisson wrote: > This series adds the Okaya 7" LCD display that is a WVGA (800x480) panel with > a 18-bit parallel interface for both Nitrogen and Sabrelite. > > A U-Boot script to configure the displays based on detection of the > touch controller is available for reference here: > https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript-mainline.txt > > Gary Bisson (2): > ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display > ARM: dts: imx6qdl-sabrelite: add Okaya LCD display Philipp, Are you okay with these two patches? Shawn -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html