From mboxrd@z Thu Jan 1 00:00:00 1970 From: Russell King - ARM Linux Subject: Re: [PATCH v2] ARM: zynq: DT: Use the zynq binding with macb Date: Thu, 28 May 2015 09:22:30 +0100 Message-ID: <20150528082230.GY2067@n2100.arm.linux.org.uk> References: <1432756728-6778-1-git-send-email-nathan.sullivan@ni.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1432756728-6778-1-git-send-email-nathan.sullivan@ni.com> Sender: linux-kernel-owner@vger.kernel.org To: Nathan Sullivan Cc: michal.simek@xilinx.com, soren.brinkmann@xilinx.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org On Wed, May 27, 2015 at 02:58:48PM -0500, Nathan Sullivan wrote: > Use the new zynq binding for macb ethernet, since it will disable half > duplex gigabit like the Zynq TRM says to do. Also allow the compatible > cadence gem binding that won't disable half duplex but works otherwise. > > Signed-off-by: Nathan Sullivan > --- > arch/arm/boot/dts/zynq-7000.dtsi | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi > index a5cd2ed..154bf93 100644 > --- a/arch/arm/boot/dts/zynq-7000.dtsi > +++ b/arch/arm/boot/dts/zynq-7000.dtsi > @@ -57,7 +57,7 @@ > regulator-always-on; > }; > > - amba { > + amba@0 { > compatible = "simple-bus"; > #address-cells = <1>; > #size-cells = <1>; ePAPR (which we follow on ARM) requires a reg= property if you have an '@' number. -- FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up according to speedtest.net.