From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lorenzo Pieralisi Subject: Re: [PATCH v3] ARM: dts: mt8173: support arm64 cpuidle-dt Date: Fri, 29 May 2015 15:55:52 +0100 Message-ID: <20150529145552.GD18512@red-moon> References: <1432882906-7940-1-git-send-email-howard.chen@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1432882906-7940-1-git-send-email-howard.chen-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Howard Chen Cc: Matthias Brugger , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Catalin Marinas , Will Deacon , Eddie Huang , "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org" , "linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org" , "srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org" , Sascha Hauer , Bobby Batacharia , Daniel Lezcano , Amit Kucheria List-Id: devicetree@vger.kernel.org On Fri, May 29, 2015 at 08:01:46AM +0100, Howard Chen wrote: > This patch adds an idle-states node to describe the mt8173 idle states and > also adds references to the idle-states node in all CPU nodes. > > Signed-off-by: Howard Chen > --- You should have added a list of incremental changes (v1->v2->v3) here otherwise there is no point in adding a patch version, we are not supposed to remember what you have changed. > arch/arm64/boot/dts/mediatek/mt8173.dtsi | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi > index 924fdb6..47e8d56 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi > @@ -49,6 +49,8 @@ > device_type = "cpu"; > compatible = "arm,cortex-a53"; > reg = <0x000>; > + enable-method = "psci"; > + cpu-idle-states = <&CPU_SLEEP_0>; > }; > > cpu1: cpu@1 { > @@ -56,6 +58,7 @@ > compatible = "arm,cortex-a53"; > reg = <0x001>; > enable-method = "psci"; > + cpu-idle-states = <&CPU_SLEEP_0>; > }; > > cpu2: cpu@100 { > @@ -63,6 +66,7 @@ > compatible = "arm,cortex-a57"; > reg = <0x100>; > enable-method = "psci"; > + cpu-idle-states = <&CPU_SLEEP_0>; > }; > > cpu3: cpu@101 { > @@ -70,6 +74,20 @@ > compatible = "arm,cortex-a57"; > reg = <0x101>; > enable-method = "psci"; > + cpu-idle-states = <&CPU_SLEEP_0>; > + }; > + > + idle-states { > + entry-method = "arm,psci"; > + > + CPU_SLEEP_0: cpu-sleep-0 { > + compatible = "arm,idle-state"; UltraNit: please move local-timer-stop here to keep the property ordering as in the bindings. More importantly, IIRC the idle state was not local-timer-stop in v2, what changed in the interim ? v1->v2 the cluster idle state disappeared, now the local timer seems to stop when it was not before (and that is the same HW), I hope things are settled now. https://lkml.org/lkml/2015/4/7/76 > + arm,psci-suspend-param = <0x0010000>; Move this property as last on the list, let's keep the generic properties first. > + entry-latency-us = <639>; > + exit-latency-us = <680>; > + min-residency-us = <1088>; > + local-timer-stop; > + }; > }; > }; I guess there is no hope of seeing the cluster state restored (?). I would like some explanation regarding local-timer-stop change, apart from that you can add: Acked-by: Lorenzo Pieralisi -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html