devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Matthijs van Duin <matthijsvanduin@gmail.com>
To: Tony Lindgren <tony@atomide.com>
Cc: "linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
	Robert Nelson <robertcnelson@gmail.com>,
	devicetree <devicetree@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	Felipe Balbi <balbi@ti.com>, Johan Hovold <johan@kernel.org>
Subject: Re: [PATCH] ARM: dts: am335x-boneblack: disable RTC-only sleep
Date: Mon, 1 Jun 2015 21:33:28 +0200	[thread overview]
Message-ID: <20150601193328.GA27640@squirrel.local> (raw)
In-Reply-To: <20150601172330.GX30984@atomide.com>

On 1 June 2015 at 19:23, Tony Lindgren <tony@atomide.com> wrote:
> Ah finally you got around doing a proper patch :)

My First Linux Patch(tm) ;-)

> Also, if this is needed as a fix for the mainline kernel to avoid hardware
> damage, please let me know too ASAP.

The damaging configuration is having &rtc { system-power-controller; }
without &tps { ti,pmic-shutdown-controller; }

So 3d76be5b9 also avoids damage, but with the unfortunate side-effect
that the system doesn't power off at all anymore (it just halts). I do
recommend applying this patch (restyled as needed) before reverting
3d76be5b9.

> Hmm no ideas about that, I guess people are using gmail to send email
> with smtps though?

Hmm, setting up mutt turned out less hassle than I remembered...

(Let's hope all goes well)

> Linux usually does not use the // style comments.. Can you please change
> that? And how about have just one section of comments then the entry
> for ti,pmic-shutdown-controller?

Fresh try...

--- 8< -----------------------------------------------------
Fixes: http://bugs.elinux.org/issues/143

Avoid entering "RTC-only mode" at poweroff. It is unsupported by most
versions of BeagleBone, and risks hardware damage.

Reported-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Tested-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Johan Hovold <johan@kernel.org>
[Matthijs van Duin: added explanatory comments]
Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>
---
 arch/arm/boot/dts/am335x-bone-common.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index c3255e0..c0b0c02 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -223,6 +223,24 @@
 /include/ "tps65217.dtsi"
 
 &tps {
+	/* Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+	 * mode and risk hardware damage if this mode is entered.
+	 *
+	 * For details, see linux-omap mailing list May 2015 thread
+	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+	 * In particular, messages:
+	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
+	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
+	 *
+	 * You can override this later with
+	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+	 * if you want to use RTC-only mode and made sure you are not affected
+	 * by the hardware problems. (Tip: double-check by performing a current
+	 * measurement after shutdown: it should be less than 1 mA.)
+	 */
+	ti,pmic-shutdown-controller;
+
 	regulators {
 		dcdc1_reg: regulator@0 {
 			regulator-name = "vdds_dpr";
-- 
2.1.4


  reply	other threads:[~2015-06-01 19:33 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-20 15:38 [PATCH] ARM: dts: am335x-boneblack: disable RTC-only sleep Robert Nelson
2015-05-20 16:47 ` Tony Lindgren
2015-06-01  0:20 ` Matthijs van Duin
2015-06-01  2:18   ` Robert Nelson
2015-06-01  5:14     ` Matthijs van Duin
2015-06-01 17:23       ` Tony Lindgren
2015-06-01 19:33         ` Matthijs van Duin [this message]
     [not found]           ` <20150601193328.GA27640-2pNSKKP3PSK44ywRPIzf9A@public.gmane.org>
2015-06-01 20:01             ` Tony Lindgren
2015-06-11 14:18               ` [PATCH] Revert "ARM: dts: am335x-boneblack: disable RTC-only sleep" Johan Hovold
     [not found]                 ` <1434032318-3557-1-git-send-email-johan-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2015-07-06 12:16                   ` Tony Lindgren
2015-06-01 17:12     ` [PATCH] ARM: dts: am335x-boneblack: disable RTC-only sleep Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150601193328.GA27640@squirrel.local \
    --to=matthijsvanduin@gmail.com \
    --cc=balbi@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=johan@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=robertcnelson@gmail.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).