devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: "Tirdea, Irina" <irina.tirdea@intel.com>
Cc: 'Bastien Nocera' <hadess@hadess.net>,
	"linux-input@vger.kernel.org" <linux-input@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 4/9] input: goodix: add ACPI IDs for GT911 and GT9271
Date: Fri, 5 Jun 2015 09:41:45 -0700	[thread overview]
Message-ID: <20150605164145.GB26708@dtor-ws> (raw)
In-Reply-To: <1F3AC3675D538145B1661F571FE1805F19A79DA8@irsmsx105.ger.corp.intel.com>

On Fri, Jun 05, 2015 at 04:36:24PM +0000, Tirdea, Irina wrote:
> 
> 
> > -----Original Message-----
> > From: Bastien Nocera [mailto:hadess@hadess.net]
> > Sent: 04 June, 2015 15:51
> > To: Tirdea, Irina
> > Cc: Dmitry Torokhov; linux-input@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org
> > Subject: Re: [PATCH 4/9] input: goodix: add ACPI IDs for GT911 and GT9271
> > 
> > On Thu, 2015-05-28 at 15:47 +0300, Irina Tirdea wrote:
> > > Add ACPI IDs to support Goodix GT911 and GT9271
> > > touchscreens.
> > 
> > Those devices are present on which systems which you would have tested
> > this on?
> > 
> 
> I have been using a custom setup by connecting the touchscreen directly
> to a virtual Linux environment through an USB-I2C adapter (https://diolan.com/dln-2).
> So these ACPI IDs do not correspond to any device publicly available.
> However, once in upstream we can use this IDs for our future platforms.

I'd rather wait until they become available then.

Thanks.

> 
> > > Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
> > > ---
> > >  drivers/input/touchscreen/goodix.c | 2 ++
> > >  1 file changed, 2 insertions(+)
> > >
> > > diff --git a/drivers/input/touchscreen/goodix.c
> > > b/drivers/input/touchscreen/goodix.c
> > > index 9561396..9e7d215 100644
> > > --- a/drivers/input/touchscreen/goodix.c
> > > +++ b/drivers/input/touchscreen/goodix.c
> > > @@ -392,6 +392,8 @@ static const struct i2c_device_id goodix_ts_id[]
> > > = {
> > >  #ifdef CONFIG_ACPI
> > >  static const struct acpi_device_id goodix_acpi_match[] = {
> > >       { "GDIX1001", 0 },
> > > +     { "GDIX0911", 0 },
> > > +     { "GDIX9271", 0 },
> > >       { }
> > >  };
> > >  MODULE_DEVICE_TABLE(acpi, goodix_acpi_match);

-- 
Dmitry

  reply	other threads:[~2015-06-05 16:41 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-28 12:47 [PATCH 0/9] Goodix touchscreen enhancements Irina Tirdea
2015-05-28 12:47 ` [PATCH 1/9] input: goodix: fix alignment issues Irina Tirdea
2015-06-04 12:48   ` Bastien Nocera
2015-06-05 16:49   ` Dmitry Torokhov
2015-06-05 17:07     ` Tirdea, Irina
2015-06-05 17:17     ` Joe Perches
2015-06-05 17:31       ` Dmitry Torokhov
2015-05-28 12:47 ` [PATCH 2/9] input: goodix: fix variable length array warning Irina Tirdea
2015-05-28 15:57   ` Antonio Ospite
2015-06-03 10:26     ` Tirdea, Irina
2015-06-03 20:49       ` Antonio Ospite
2015-06-05 16:34         ` Tirdea, Irina
2015-06-05 16:40           ` Dmitry Torokhov
2015-06-05 17:00             ` Tirdea, Irina
2015-06-05 17:11               ` Dmitry Torokhov
2015-06-05 17:34                 ` Tirdea, Irina
2015-05-28 12:47 ` [PATCH 3/9] input: goodix: export id and version read from device Irina Tirdea
2015-05-28 12:47 ` [PATCH 4/9] input: goodix: add ACPI IDs for GT911 and GT9271 Irina Tirdea
2015-06-04 12:51   ` Bastien Nocera
2015-06-05 16:36     ` Tirdea, Irina
2015-06-05 16:41       ` Dmitry Torokhov [this message]
2015-06-05 17:01         ` Tirdea, Irina
2015-05-28 12:47 ` [PATCH 5/9] input: goodix: reset device at init Irina Tirdea
     [not found]   ` <1432817265-23891-6-git-send-email-irina.tirdea-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2015-05-28 13:19     ` Mark Rutland
2015-05-28 13:42       ` Tirdea, Irina
2015-05-28 12:47 ` [PATCH 6/9] input: goodix: write configuration data to device Irina Tirdea
2015-05-28 13:21   ` Mark Rutland
2015-05-28 13:51     ` Tirdea, Irina
2015-06-04 12:55       ` Bastien Nocera
2015-06-05 16:36         ` Tirdea, Irina
2015-06-05 16:43           ` Dmitry Torokhov
2015-06-05 17:05             ` Tirdea, Irina
2015-05-28 12:47 ` [PATCH 7/9] input: goodix: add power management support Irina Tirdea
2015-06-04 13:01   ` Bastien Nocera
2015-06-05 16:42     ` Tirdea, Irina
     [not found] ` <1432817265-23891-1-git-send-email-irina.tirdea-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2015-05-28 12:47   ` [PATCH 8/9] input: goodix: add support for ESD Irina Tirdea
     [not found]     ` <1432817265-23891-9-git-send-email-irina.tirdea-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2015-05-28 13:23       ` Mark Rutland
2015-05-28 14:26         ` Tirdea, Irina
2015-06-04 12:57           ` Bastien Nocera
2015-06-05 16:37             ` Tirdea, Irina
2015-06-05 16:46               ` Dmitry Torokhov
2015-06-08 14:28                 ` Tirdea, Irina
2015-07-30 12:06                   ` Tirdea, Irina
2015-05-28 12:47   ` [PATCH 9/9] input: goodix: use goodix_i2c_write_u8 instead of i2c_master_send Irina Tirdea
2015-06-04 13:04 ` [PATCH 0/9] Goodix touchscreen enhancements Bastien Nocera
2015-06-05 16:36   ` Tirdea, Irina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150605164145.GB26708@dtor-ws \
    --to=dmitry.torokhov@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hadess@hadess.net \
    --cc=irina.tirdea@intel.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).