From: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
To: Li Jun <jun.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
balbi-l0cyMroinI0@public.gmane.org,
peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
macpaul-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Subject: Re: [PATCH v3 07/22] usb: chipidea: set usb gadeget's otg config
Date: Tue, 16 Jun 2015 11:44:52 +0300 [thread overview]
Message-ID: <20150616114452.4c15b8e1@rockdesk> (raw)
In-Reply-To: <1434437532-23678-8-git-send-email-jun.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
On Tue, 16 Jun 2015 14:51:57 +0800
Li Jun <jun.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org> wrote:
> Set gadget's otg features according to controller's capability and usb
> property in device tree.
>
> Signed-off-by: Li Jun <jun.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
> drivers/usb/chipidea/core.c | 18 ++++++++++++++++++
> drivers/usb/chipidea/udc.c | 20 +++++++++++++++++++-
> include/linux/usb/chipidea.h | 4 ++++
> 3 files changed, 41 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 74fea4f..45bd44e 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -588,6 +588,24 @@ static int ci_get_platdata(struct device *dev,
> of_usb_host_tpl_support(dev->of_node);
> }
>
> + if (platdata->dr_mode == USB_DR_MODE_OTG) {
> + if (!platdata->otg_rev) {
> + platdata->otg_rev =
> + of_usb_get_otg_rev(dev->of_node);
> + }
> + if (platdata->otg_rev) {
> + if (!platdata->srp_support)
> + platdata->srp_support =
> + !of_usb_otg_srp_disabled(dev->of_node);
> + if (!platdata->hnp_support)
> + platdata->hnp_support =
> + !of_usb_otg_hnp_disabled(dev->of_node);
> + if (!platdata->adp_support)
> + platdata->adp_support =
> + !of_usb_otg_adp_disabled(dev->of_node);
> + }
> + }
> +
Looks like there is some scope of sharing this code among controller drivers
and also adding sanity check.
How about adding
struct usb_otg_caps {
u16 otg_rev;
bool srp_support;
bool hnp_support;
bool adp_support;
};
And below API
/* sets device otg capabilities based on controller capabilities and device tree flags */
void of_usb_otg_set_capabilities(sturct device_node *node, struct usb_otg_caps *cntrl_caps, struct usb_otg_caps *device_caps)
{
u16 otg_rev = of_usb_get_otg_rev(dev->of_node);
*device_caps = *cntrl_caps;
if (!otg_rev) { /* legacy platform */
device_caps->adp_support = false;
/* For SRP/HNP respect what controller supports */
return;
}
if (otg_rev < cntrl_caps->otg_rev)
device_caps->otg_rev = cntrl_caps->otg_rev;
if (of_usb_otg_srp_disabled(dev->of_node))
device_caps->srp_support = false;
if (of_usb_otg_hnp_disabled(dev->of_node))
device_caps->hnp_support = false;
if (of_usb_otg_adp_disabled(dev->of_node))
device_caps->adp_support = false;
/* sanity check */
if ((otg_rev < 0x0200) && device_caps->adp_support) {
/* pre otg 2.0 doesn't support ADP */
device_caps->adp_support = false;
}
return;
}
> if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL)
> platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
>
> diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
> index 764f668..5d2c6e8 100644
> --- a/drivers/usb/chipidea/udc.c
> +++ b/drivers/usb/chipidea/udc.c
> @@ -1821,6 +1821,24 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci)
> }
>
> /**
> + * udc_update_otg_config: update gadget otg config
> + * * @ci: chipidea controller
> + */
> +static void udc_update_otg_config(struct ci_hdrc *ci)
> +{
> + if (!ci->is_otg)
> + return;
> +
> + ci->gadget.otg_rev = ci->platdata->otg_rev;
> + ci->gadget.srp_support = ci->platdata->srp_support;
> + ci->gadget.hnp_support = ci->platdata->hnp_support;
> + ci->gadget.adp_support = ci->platdata->adp_support;
> + if (ci->gadget.srp_support || ci->gadget.hnp_support ||
> + ci->gadget.adp_support)
> + ci->gadget.is_otg = 1;
> +}
> +
> +/**
> * udc_start: initialize gadget role
> * @ci: chipidea controller
> */
> @@ -1834,9 +1852,9 @@ static int udc_start(struct ci_hdrc *ci)
> ci->gadget.ops = &usb_gadget_ops;
> ci->gadget.speed = USB_SPEED_UNKNOWN;
> ci->gadget.max_speed = USB_SPEED_HIGH;
> - ci->gadget.is_otg = ci->is_otg ? 1 : 0;
> ci->gadget.name = ci->platdata->name;
>
> + udc_update_otg_config(ci);
> INIT_LIST_HEAD(&ci->gadget.ep_list);
>
> /* alloc resources */
> diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
> index ab94f78..6765b28 100644
> --- a/include/linux/usb/chipidea.h
> +++ b/include/linux/usb/chipidea.h
> @@ -34,7 +34,11 @@ struct ci_hdrc_platform_data {
> #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
> void (*notify_event) (struct ci_hdrc *ci, unsigned event);
> struct regulator *reg_vbus;
> + u16 otg_rev;
> bool tpl_support;
> + bool srp_support;
> + bool hnp_support;
> + bool adp_support;
this then changes to
struct usb_otg_caps otg_caps;
> };
>
> /* Default offset of capability registers */
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-06-16 8:44 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-16 6:51 [PATCH v3 00/22] usb gadget update for OTG 2.0 Li Jun
[not found] ` <1434437532-23678-1-git-send-email-jun.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-06-16 6:51 ` [PATCH v3 01/22] usb: add usb_otg20_descriptor for OTG 2.0 and above Li Jun
[not found] ` <1434437532-23678-2-git-send-email-jun.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-06-16 7:25 ` Roger Quadros
2015-06-16 6:51 ` [PATCH v3 02/22] usb: add USB_OTG_ADP definition Li Jun
2015-06-16 6:51 ` [PATCH v3 03/22] usb: add OTG feature options to gadget structure Li Jun
[not found] ` <1434437532-23678-4-git-send-email-jun.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-06-16 7:28 ` Roger Quadros
2015-06-16 8:06 ` Li Jun
2015-06-16 6:51 ` [PATCH v3 04/22] usb: gadget: composite: add USB_DT_OTG request handling Li Jun
[not found] ` <1434437532-23678-5-git-send-email-jun.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-06-16 7:30 ` Roger Quadros
2015-06-16 6:51 ` [PATCH v3 05/22] doc: dt-binding: usb: add otg related properties Li Jun
[not found] ` <1434437532-23678-6-git-send-email-jun.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-06-16 8:21 ` Roger Quadros
2015-06-16 8:32 ` Li Jun
2015-06-16 6:51 ` [PATCH v3 06/22] usb: common: add API to get usb otg features from device tree Li Jun
2015-06-16 6:51 ` [PATCH v3 07/22] usb: chipidea: set usb gadeget's otg config Li Jun
[not found] ` <1434437532-23678-8-git-send-email-jun.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-06-16 8:44 ` Roger Quadros [this message]
2015-06-16 9:21 ` Li Jun
2015-06-17 8:21 ` Roger Quadros
2015-06-16 6:51 ` [PATCH v3 08/22] usb: chipidea: update ci_otg_is_fsm_mode conditions Li Jun
2015-06-16 6:51 ` [PATCH v3 09/22] usb: gadget: add usb_otg_descriptor_add interface to init usb_otg_descriptor Li Jun
[not found] ` <1434437532-23678-10-git-send-email-jun.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-06-16 8:01 ` Roger Quadros
2015-06-16 8:13 ` Li Jun
2015-06-16 6:52 ` [PATCH v3 10/22] usb: gadget: configfs: init and add usb_otg_descriptor for usb configurations Li Jun
[not found] ` <1434437532-23678-11-git-send-email-jun.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-06-16 7:58 ` Roger Quadros
2015-06-16 8:08 ` Li Jun
2015-06-16 6:52 ` [PATCH v3 11/22] usb: gadget: ether: init usb_otg_descriptor via usb_otg_descriptor_add Li Jun
2015-06-16 6:52 ` [PATCH v3 12/22] usb: gadget: acm_ms: " Li Jun
2015-06-16 6:52 ` [PATCH v3 13/22] usb: gadget: audio: " Li Jun
2015-06-16 6:52 ` [PATCH v3 14/22] usb: gadget: cdc2: " Li Jun
2015-06-16 6:52 ` [PATCH v3 15/22] usb: gadget: g_ffs: " Li Jun
2015-06-16 6:52 ` [PATCH v3 16/22] usb: gadget: hid: " Li Jun
2015-06-16 6:52 ` [PATCH v3 17/22] usb: gadget: mass_storage: " Li Jun
2015-06-16 6:52 ` [PATCH v3 18/22] usb: gadget: multi: " Li Jun
2015-06-16 6:52 ` [PATCH v3 19/22] usb: gadget: ncm: " Li Jun
2015-06-16 6:52 ` [PATCH v3 20/22] usb: gadget: printer: " Li Jun
2015-06-16 6:52 ` [PATCH v3 21/22] usb: gadget: serial: " Li Jun
2015-06-16 6:52 ` [PATCH v3 22/22] usb: gadget: zero: " Li Jun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150616114452.4c15b8e1@rockdesk \
--to=rogerq-l0cymroini0@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=jun.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=macpaul-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).