From: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Michal Suchanek
<hramrach-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: Re: [PATCH 1/3] mfd: ax20x: Add axp152 support
Date: Thu, 25 Jun 2015 11:11:56 +0100 [thread overview]
Message-ID: <20150625095031.GA15013@x1> (raw)
In-Reply-To: <1435088503-20776-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
On Tue, 23 Jun 2015, Hans de Goede wrote:
> From: Michal Suchanek <hramrach-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>
> The axp152 is a stripped down version of the axp202 pmic with the battery
> charging function removed as it is intended for top-set boxes.
>
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> ---
> Documentation/devicetree/bindings/mfd/axp20x.txt | 4 +-
This should be in a separate patch.
> drivers/mfd/axp20x.c | 92 ++++++++++++++++++++++++
> include/linux/mfd/axp20x.h | 61 +++++++++++++++-
> 3 files changed, 155 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
> index 753f14f..4181122 100644
> --- a/Documentation/devicetree/bindings/mfd/axp20x.txt
> +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
> @@ -1,12 +1,14 @@
> AXP family PMIC device tree bindings
>
> The axp20x family current members :
> +axp152 (X-Powers)
> axp202 (X-Powers)
> axp209 (X-Powers)
> axp221 (X-Powers)
>
> Required properties:
> -- compatible: "x-powers,axp202", "x-powers,axp209", "x-powers,axp221"
> +- compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209",
> + "x-powers,axp221"
> - reg: The I2C slave address for the AXP chip
> - interrupt-parent: The parent interrupt controller
> - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
For this patch, when it is separated out:
Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index ca4a604..49bba28 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -30,12 +30,34 @@
> #define AXP20X_OFF 0x80
>
> static const char * const axp20x_model_names[] = {
> + "AXP152",
> "AXP202",
> "AXP209",
> "AXP221",
> "AXP288",
> };
>
> +static const struct regmap_range axp152_writeable_ranges[] = {
> + regmap_reg_range(AXP152_LDO3456_DC1234_CTRL, AXP152_IRQ3_STATE),
> + regmap_reg_range(AXP152_DCDC_MODE, AXP152_PWM1_DUTY_CYCLE),
> +};
> +
> +static const struct regmap_range axp152_volatile_ranges[] = {
> + regmap_reg_range(AXP152_PWR_OP_MODE, AXP152_PWR_OP_MODE),
> + regmap_reg_range(AXP152_IRQ1_EN, AXP152_IRQ3_STATE),
> + regmap_reg_range(AXP152_GPIO_INPUT, AXP152_GPIO_INPUT),
> +};
> +
> +static const struct regmap_access_table axp152_writeable_table = {
> + .yes_ranges = axp152_writeable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(axp152_writeable_ranges),
> +};
> +
> +static const struct regmap_access_table axp152_volatile_table = {
> + .yes_ranges = axp152_volatile_ranges,
> + .n_yes_ranges = ARRAY_SIZE(axp152_volatile_ranges),
> +};
> +
> static const struct regmap_range axp20x_writeable_ranges[] = {
> regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
> regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
> @@ -99,6 +121,20 @@ static const struct regmap_access_table axp288_volatile_table = {
> .n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges),
> };
>
> +static struct resource axp152_pek_resources[] = {
> + {
> + .name = "PEK_DBR",
> + .start = AXP152_IRQ_PEK_RIS_EDGE,
> + .end = AXP152_IRQ_PEK_RIS_EDGE,
> + .flags = IORESOURCE_IRQ,
> + }, {
> + .name = "PEK_DBF",
> + .start = AXP152_IRQ_PEK_FAL_EDGE,
> + .end = AXP152_IRQ_PEK_FAL_EDGE,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
DEFINE_RES_*()
After you've fixed this up, please add my:
Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.
next prev parent reply other threads:[~2015-06-25 10:11 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-23 19:41 [PATCH 0/3] mfd: ax20x: Add axp152 support Hans de Goede
[not found] ` <1435088503-20776-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-06-23 19:41 ` [PATCH 1/3] " Hans de Goede
[not found] ` <1435088503-20776-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-06-24 12:21 ` Michal Suchanek
2015-06-25 10:11 ` Lee Jones [this message]
2015-06-23 19:41 ` [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic Hans de Goede
[not found] ` <1435088503-20776-3-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-06-25 17:40 ` Maxime Ripard
2015-06-26 8:22 ` Hans de Goede
[not found] ` <558D0BC2.10004-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-07-06 8:57 ` Maxime Ripard
2015-07-06 12:12 ` [linux-sunxi] " Hans de Goede
[not found] ` <559A70B6.3010101-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-07-09 8:10 ` Maxime Ripard
2015-06-23 19:41 ` [PATCH 3/3] ARM: dts: A10s-OLinuxIno: Add a node for " Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150625095031.GA15013@x1 \
--to=lee.jones-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=hramrach-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).