Re: [PATCHv6 1/2] dts: Adding docs for Xilinx LogiCORE IP mailbox driver.

["Sören Brinkmann" <soren.brinkmann@xilinx.com>]

On Mon, 2015-07-06 at 10:16AM -0700, Moritz Fischer wrote:
> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
> Acked-by: Michal Simek <michal.simek@xilinx.com>
> ---
>  .../devicetree/bindings/mailbox/xilinx-mailbox.txt | 44 ++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mailbox/xilinx-mailbox.txt
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/xilinx-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xilinx-mailbox.txt
> new file mode 100644
> index 0000000..97b81f8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/xilinx-mailbox.txt
> @@ -0,0 +1,44 @@
> +Xilinx Mailbox Driver
> +=====================
> +
> +Required properties:
> +- compatible       : "xlnx,mailbox-2.1".
> +- reg              :  physical base address of the mailbox and length of
> +                      memory mapped region.
> +- #mbox-cells      :  common mailbox binding property to identify the number
> +                      of cells required for the mailbox specifier, should be 0
> +- clocks           :  phandle to clock provider
> +- clock-names      :  must be 'mbox'
> +
> +Optional properties:
> +- interrupt-parent : interrupt source phandle
> +- interrupts       : interrupt number, The interrupt specifier format
> +                     depends on the interrupt controller parent.
> +
> +Example:
> +	mbox: mailbox@40400000 {
> +		compatible = "xlnx,mailbox-2.1";
> +		reg = <0x40400000 0x100>;
> +		interrupt-parent = <&intc>;
> +		interrupts = <5>;
> +		#mbox-cells = <0>;
> +		clocks = <&clkc 15>;
> +		clock-names = "mbox";
> +	};
> +
> +Mailbox client
> +===============
> +"mboxes" and the optional "mbox-names" (please see
> +Documentation/devicetree/bindings/mailbox/mailbox.txt for details). Each value
> +of the mboxes property should contain a phandle to the mailbox controller
> +device node and second argument is the channel index. It must be 0 (hardware
> +support only one channel). The equivalent "mbox-names" property value can be
> +used to give a name to the communication channel to be used by the client user.
> +
> +Example:
> +	mclient0: mclient0@400 {
> +		compatible = "client-1.0";
> +		reg = <0x400 0x10>;
> +		mbox-names = "mbox";
> +		mboxes = <&mbox 0>;

Sorry, to bring this up again, but I'm confused regarding the #mbox-cells
thing. Above it says #mbox-cells is 0. In that case, shouldn't the
'mboxes' property not only be '<&mbox>'?

Moreover, the generic mailbox bindings
(https://www.kernel.org/doc/Documentation/devicetree/bindings/mailbox/mailbox.txt)
mandate #mbox-cells to be at least 1.

Does something need to be aligned here?

	Sören