From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: Re: [PATCH-V5 3/4] mfd: 88pm800: Set default interrupt clear method Date: Tue, 7 Jul 2015 08:29:58 +0100 Message-ID: <20150707072958.GN3182@x1> References: <1435591877-18214-1-git-send-email-vaibhav.hiremath@linaro.org> <1435591877-18214-4-git-send-email-vaibhav.hiremath@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: <1435591877-18214-4-git-send-email-vaibhav.hiremath@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: Vaibhav Hiremath Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, robh+dt@kernel.org, sameo@linux.intel.com, linux-kernel@vger.kernel.org, yizhang@marvell.com, Zhao Ye List-Id: devicetree@vger.kernel.org On Mon, 29 Jun 2015, Vaibhav Hiremath wrote: > As per the spec, bit 1 (INT_CLEAR_MODE) of reg addr 0xe > (page 0) controls the method of clearing interrupt > status of 88pm800 family of devices; >=20 > 0: clear on read > 1: clear on write >=20 > If pdata is not coming from board file, then set the > default irq clear method to "irq clear on write" >=20 > Also, as suggested by "Lee Jones" renaming variable field > to appropriate name. >=20 > Signed-off-by: Zhao Ye > Signed-off-by: Vaibhav Hiremath > --- > drivers/mfd/88pm800.c | 15 ++++++++++----- > include/linux/mfd/88pm80x.h | 10 ++++++++-- > 2 files changed, 18 insertions(+), 7 deletions(-) >=20 > diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c > index d495737..66347be 100644 > --- a/drivers/mfd/88pm800.c > +++ b/drivers/mfd/88pm800.c > @@ -374,7 +374,7 @@ static int device_irq_init_800(struct pm80x_chip = *chip) > { > struct regmap *map =3D chip->regmap; > unsigned long flags =3D IRQF_ONESHOT; > - int data, mask, ret =3D -EINVAL; > + int irq_clr_mode, mask, ret =3D -EINVAL; > =20 > if (!map || !chip->irq) { > dev_err(chip->dev, "incorrect parameters\n"); > @@ -382,15 +382,16 @@ static int device_irq_init_800(struct pm80x_chi= p *chip) > } > =20 > /* > - * irq_mode defines the way of clearing interrupt. it's read-clear = by > - * default. > + * irq_clr_on_wr defines the way of clearing interrupt by > + * read/write(0/1). It's read-clear by default. > */ > mask =3D > PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR | > PM800_WAKEUP2_INT_MASK; > =20 > - data =3D PM800_WAKEUP2_INT_CLEAR; > - ret =3D regmap_update_bits(map, PM800_WAKEUP2, mask, data); > + irq_clr_mode =3D chip->irq_clr_method =3D=3D PM800_IRQ_CLR_ON_WRITE= ? > + PM800_WAKEUP2_INT_WRITE_CLEAR : PM800_WAKEUP2_INT_READ_CLEAR; > + ret =3D regmap_update_bits(map, PM800_WAKEUP2, mask, irq_clr_mode); What's stopping you just passing PM800_WAKEUP2_INT_WRITE_CLEAR or PM800_WAKEUP2_INT_READ_CLEAR from pdata? Then you can use the value directly without all of this faffing about. regmap_update_bits(map, PM800_WAKEUP2, mask, pdata->irq_clr_mode); > if (ret < 0) > goto out; > @@ -512,6 +513,7 @@ static int device_800_init(struct pm80x_chip *chi= p, > } > =20 > chip->regmap_irq_chip =3D &pm800_irq_chip; > + chip->irq_clr_method =3D pdata->irq_clr_method; > =20 > ret =3D device_irq_init_800(chip); > if (ret < 0) { > @@ -564,6 +566,9 @@ static int pm800_probe(struct i2c_client *client, > pdata =3D devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); > if (!pdata) > return -ENOMEM; > + > + /* by default, set irq clear method on write */ > + pdata->irq_clr_method =3D PM800_IRQ_CLR_ON_WRITE; > } > =20 > ret =3D pm80x_init(client); > diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.= h > index 8fcad63..648e01a 100644 > --- a/include/linux/mfd/88pm80x.h > +++ b/include/linux/mfd/88pm80x.h > @@ -77,6 +77,8 @@ enum { > #define PM800_WAKEUP2 (0x0E) > #define PM800_WAKEUP2_INV_INT BIT(0) > #define PM800_WAKEUP2_INT_CLEAR BIT(1) > +#define PM800_WAKEUP2_INT_READ_CLEAR (0 << 1) > +#define PM800_WAKEUP2_INT_WRITE_CLEAR (1 << 1) > #define PM800_WAKEUP2_INT_MASK BIT(2) > =20 > #define PM800_POWER_UP_LOG (0x10) > @@ -300,7 +302,11 @@ struct pm80x_chip { > struct regmap_irq_chip_data *irq_data; > int type; > int irq; > - int irq_mode; > + > +#define PM800_IRQ_CLR_ON_READ 0 > +#define PM800_IRQ_CLR_ON_WRITE 1 Defines in the middle of structs makes for ugly code. > + bool irq_clr_method; /* '1': Clear on write, '0': Clear on read */ > unsigned long wu_flag; > spinlock_t lock; > }; > @@ -315,7 +321,7 @@ struct pm80x_platform_data { > */ > struct regulator_init_data *regulators[PM800_ID_RG_MAX]; > unsigned int num_regulators; > - int irq_mode; /* Clear interrupt by read/write(0/1) */ > + bool irq_clr_method; /* Clear interrupt by read/write(0/1) */ > int batt_det; /* enable/disable */ > int (*plat_config)(struct pm80x_chip *chip, > struct pm80x_platform_data *pdata); --=20 Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org =E2=94=82 Open source software for ARM SoCs =46ollow Linaro: Facebook | Twitter | Blog