Re: [PATCH-V5 4/4] mfd: devicetree: bindings: Add new 88pm800 mfd binding

[Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]

On Mon, 29 Jun 2015, Vaibhav Hiremath wrote:

> With addition of DT support to 88pm800 mfd driver, this patch
> adds new DT binding documentation along with respective properties.
> 
> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/mfd/88pm800.txt | 53 +++++++++++++++++++++++
>  1 file changed, 53 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/88pm800.txt

For my own reference:
  Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Yes, I plan to take this through the MFD tree.

> diff --git a/Documentation/devicetree/bindings/mfd/88pm800.txt b/Documentation/devicetree/bindings/mfd/88pm800.txt
> new file mode 100644
> index 0000000..dec842f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/88pm800.txt
> @@ -0,0 +1,53 @@
> +* Marvell 88PM80x Power Management IC
> +
> +Required parent device properties:
> +- compatible		: "marvell,88pm800", "marvell,88pm805", "marvell,88pm860"
> +- reg			: the I2C slave address for the 88pm80x family chip
> +- interrupts		: IRQ line for the 88pm80x family chip
> +- interrupt-controller	: describes the 88pm80x family chip as an interrupt
> +			  controller
> +- #interrupt-cells 	: should be 1.
> +			  The cell is the 88pm80x local IRQ number
> +
> +88pm80x family of devices consists of varied group of sub-devices:
> +
> +Device		 	Supply Names	 Description
> +------		 	------------	 -----------
> +88pm80x-onkey		:		: On key
> +88pm80x-rtc		:		: RTC
> +88pm80x-regulator	:		: Regulators
> +
> +Example:
> +
> +	pmic: 88pm800@30 {
> +		compatible = "marvell,88pm800";
> +		reg = <0x30>;
> +		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-parent = <&gic>;
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +
> +		regulators {
> +			compatible = "marvell,88pm80x-regulator";
> +
> +			buck1a: BUCK1A {
> +				regulator-name = "BUCK1A";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo1: LDO1 {
> +				regulator-name = "LDO1";
> +				regulator-min-microvolt = <1700000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +		};
> +
> +		rtc {
> +			compatible = "marvell,88pm80x-rtc";
> +		};
> +	};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html