[PATCH v3 0/3] Fixes for MT8173 PLLs

[PATCH v3 0/3] Fixes for MT8173 PLLs

[James Liao]

Title changed. Previous title is "Add MT8173 MMPLL change rate support"
and can be found in [1].

This patchset contains some fixes for changing rate of PLLs, especially
for MMPLL.

The first 2 patches are common fixes for PLLs, and the last patch is a
fix to support MT8173 MMPLL changing rate because its frequency setting
is different from other PLLs.

changes since v2:
- Rebase to 4.2-rc1.
- Split fixes of PLL setting calculation to a separeted patch.

changes since v1:
- Add a separated patch for mtk_pll_set_rate_regs().
- Use a structure array to describe a div_table.
- Limit max frequency to div_table[0].
- Minor changes such as static and comments.

[1] https://lkml.org/lkml/2015/7/8/265

James Liao (3):
  clk: mediatek: Fix PLL registers setting flow
  clk: mediatek: Fix calculation of PLL rate settings
  clk: mediatek: Add MT8173 MMPLL change rate support

 drivers/clk/mediatek/clk-mt8173.c | 24 +++++++++++++++++++++---
 drivers/clk/mediatek/clk-mtk.h    |  6 ++++++
 drivers/clk/mediatek/clk-pll.c    | 39 +++++++++++++++++++++++++++------------
 3 files changed, 54 insertions(+), 15 deletions(-)

--
1.8.1.1.dirty

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 1/3] clk: mediatek: Fix PLL registers setting flow

[James Liao]

Write postdiv and pcw settings at the same time for PLLs if postdiv
and pcw settings are on the same register.

This is need by PLLs such as MT8173 MMPLL and ARM*PLL.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
---
 drivers/clk/mediatek/clk-pll.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index 44409e9..68af518 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -90,20 +90,23 @@ static unsigned long __mtk_pll_recalc_rate(struct mtk_clk_pll *pll, u32 fin,
 static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw,
 		int postdiv)
 {
-	u32 con1, pd, val;
+	u32 con1, val;
 	int pll_en;
 
-	/* set postdiv */
-	pd = readl(pll->pd_addr);
-	pd &= ~(POSTDIV_MASK << pll->data->pd_shift);
-	pd |= (ffs(postdiv) - 1) << pll->data->pd_shift;
-	writel(pd, pll->pd_addr);
-
 	pll_en = readl(pll->base_addr + REG_CON0) & CON0_BASE_EN;
 
-	/* set pcw */
-	val = readl(pll->pcw_addr);
+	/* set postdiv */
+	val = readl(pll->pd_addr);
+	val &= ~(POSTDIV_MASK << pll->data->pd_shift);
+	val |= (ffs(postdiv) - 1) << pll->data->pd_shift;
+
+	/* postdiv and pcw need to set at the same time if on same register */
+	if (pll->pd_addr != pll->pcw_addr) {
+		writel(val, pll->pd_addr);
+		val = readl(pll->pcw_addr);
+	}
 
+	/* set pcw */
 	val &= ~GENMASK(pll->data->pcw_shift + pll->data->pcwbits - 1,
 			pll->data->pcw_shift);
 	val |= pcw << pll->data->pcw_shift;
-- 
1.8.1.1.dirty

Re: [PATCH v3 1/3] clk: mediatek: Fix PLL registers setting flow

[Stephen Boyd]

On 07/10, James Liao wrote:
> Write postdiv and pcw settings at the same time for PLLs if postdiv
> and pcw settings are on the same register.
> 
> This is need by PLLs such as MT8173 MMPLL and ARM*PLL.
> 
> Signed-off-by: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> ---

Applied to clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 2/3] clk: mediatek: Fix calculation of PLL rate settings

[James Liao]

Avoid u32 overflow when calculate post divider setting, and
increase the max post divider setting from 3 (/8) to 4 (/16).

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
---
 drivers/clk/mediatek/clk-pll.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index 68af518..0e3f4ef 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -144,9 +144,9 @@ static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
 	if (freq > pll->data->fmax)
 		freq = pll->data->fmax;
 
-	for (val = 0; val < 4; val++) {
+	for (val = 0; val < 5; val++) {
 		*postdiv = 1 << val;
-		if (freq * *postdiv >= fmin)
+		if ((u64)freq * *postdiv >= fmin)
 			break;
 	}
 
-- 
1.8.1.1.dirty

Re: [PATCH v3 2/3] clk: mediatek: Fix calculation of PLL rate settings

[Stephen Boyd]

On 07/10, James Liao wrote:
> Avoid u32 overflow when calculate post divider setting, and
> increase the max post divider setting from 3 (/8) to 4 (/16).
> 
> Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
> ---

Applied to clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v3 3/3] clk: mediatek: Add MT8173 MMPLL change rate support

[James Liao]

MT8173 MMPLL frequency settings are different from common PLLs.
It needs different post divider settings for some ranges of frequency.
This patch add support for MT8173 MMPLL frequency setting by adding
div-rate table to lookup suitable post divider setting under a
specified frequency.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
---
 drivers/clk/mediatek/clk-mt8173.c | 24 +++++++++++++++++++++---
 drivers/clk/mediatek/clk-mtk.h    |  6 ++++++
 drivers/clk/mediatek/clk-pll.c    | 18 +++++++++++++++---
 3 files changed, 42 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
index 4b9e04c..4a202f2 100644
--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -779,8 +779,9 @@ CLK_OF_DECLARE(mtk_pericfg, "mediatek,mt8173-pericfg", mtk_pericfg_init);
 
 #define CON0_MT8173_RST_BAR	BIT(24)
 
-#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, _pd_shift, \
-			_tuner_reg, _pcw_reg, _pcw_shift) { \
+#define PLL_B(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits,	\
+			_pd_reg, _pd_shift, _tuner_reg, _pcw_reg,	\
+			_pcw_shift, _div_table) {			\
 		.id = _id,						\
 		.name = _name,						\
 		.reg = _reg,						\
@@ -795,14 +796,31 @@ CLK_OF_DECLARE(mtk_pericfg, "mediatek,mt8173-pericfg", mtk_pericfg_init);
 		.tuner_reg = _tuner_reg,				\
 		.pcw_reg = _pcw_reg,					\
 		.pcw_shift = _pcw_shift,				\
+		.div_table = _div_table,				\
 	}
 
+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits,	\
+			_pd_reg, _pd_shift, _tuner_reg, _pcw_reg,	\
+			_pcw_shift)					\
+		PLL_B(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \
+			_pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift, \
+			NULL)
+
+static const struct mtk_pll_div_table mmpll_div_table[] = {
+	{ .div = 0, .freq = MT8173_PLL_FMAX },
+	{ .div = 1, .freq = 1000000000 },
+	{ .div = 2, .freq = 702000000 },
+	{ .div = 3, .freq = 253500000 },
+	{ .div = 4, .freq = 126750000 },
+	{ } /* sentinel */
+};
+
 static const struct mtk_pll_data plls[] = {
 	PLL(CLK_APMIXED_ARMCA15PLL, "armca15pll", 0x200, 0x20c, 0x00000001, 0, 21, 0x204, 24, 0x0, 0x204, 0),
 	PLL(CLK_APMIXED_ARMCA7PLL, "armca7pll", 0x210, 0x21c, 0x00000001, 0, 21, 0x214, 24, 0x0, 0x214, 0),
 	PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x220, 0x22c, 0xf0000101, HAVE_RST_BAR, 21, 0x220, 4, 0x0, 0x224, 0),
 	PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x230, 0x23c, 0xfe000001, HAVE_RST_BAR, 7, 0x230, 4, 0x0, 0x234, 14),
-	PLL(CLK_APMIXED_MMPLL, "mmpll", 0x240, 0x24c, 0x00000001, 0, 21, 0x244, 24, 0x0, 0x244, 0),
+	PLL_B(CLK_APMIXED_MMPLL, "mmpll", 0x240, 0x24c, 0x00000001, 0, 21, 0x244, 24, 0x0, 0x244, 0, mmpll_div_table),
 	PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x250, 0x25c, 0x00000001, 0, 21, 0x250, 4, 0x0, 0x254, 0),
 	PLL(CLK_APMIXED_VENCPLL, "vencpll", 0x260, 0x26c, 0x00000001, 0, 21, 0x260, 4, 0x0, 0x264, 0),
 	PLL(CLK_APMIXED_TVDPLL, "tvdpll", 0x270, 0x27c, 0x00000001, 0, 21, 0x270, 4, 0x0, 0x274, 0),
diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
index 9dda9d8..efea28d 100644
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -134,6 +134,11 @@ struct clk_onecell_data *mtk_alloc_clk_data(unsigned int clk_num);
 
 #define HAVE_RST_BAR	BIT(0)
 
+struct mtk_pll_div_table {
+	u32 div;
+	unsigned long freq;
+};
+
 struct mtk_pll_data {
 	int id;
 	const char *name;
@@ -150,6 +155,7 @@ struct mtk_pll_data {
 	int pcwbits;
 	uint32_t pcw_reg;
 	int pcw_shift;
+	const struct mtk_pll_div_table *div_table;
 };
 
 void __init mtk_clk_register_plls(struct device_node *node,
diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index 0e3f4ef..622e7b6 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -138,16 +138,28 @@ static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
 		u32 freq, u32 fin)
 {
 	unsigned long fmin = 1000 * MHZ;
+	const struct mtk_pll_div_table *div_table = pll->data->div_table;
 	u64 _pcw;
 	u32 val;
 
 	if (freq > pll->data->fmax)
 		freq = pll->data->fmax;
 
-	for (val = 0; val < 5; val++) {
+	if (div_table) {
+		if (freq > div_table[0].freq)
+			freq = div_table[0].freq;
+
+		for (val = 0; div_table[val + 1].freq != 0; val++) {
+			if (freq > div_table[val + 1].freq)
+				break;
+		}
 		*postdiv = 1 << val;
-		if ((u64)freq * *postdiv >= fmin)
-			break;
+	} else {
+		for (val = 0; val < 5; val++) {
+			*postdiv = 1 << val;
+			if ((u64)freq * *postdiv >= fmin)
+				break;
+		}
 	}
 
 	/* _pcw = freq * postdiv / fin * 2^pcwfbits */
-- 
1.8.1.1.dirty

Re: [PATCH v3 3/3] clk: mediatek: Add MT8173 MMPLL change rate support

[Stephen Boyd]

On 07/10, James Liao wrote:
> MT8173 MMPLL frequency settings are different from common PLLs.
> It needs different post divider settings for some ranges of frequency.
> This patch add support for MT8173 MMPLL frequency setting by adding
> div-rate table to lookup suitable post divider setting under a
> specified frequency.
> 
> Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
> ---

Applied to clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v3 0/3] Fixes for MT8173 PLLs

[Sascha Hauer]

On Fri, Jul 10, 2015 at 04:39:31PM +0800, James Liao wrote:
> Title changed. Previous title is "Add MT8173 MMPLL change rate support"
> and can be found in [1].
> 
> This patchset contains some fixes for changing rate of PLLs, especially
> for MMPLL.
> 
> The first 2 patches are common fixes for PLLs, and the last patch is a
> fix to support MT8173 MMPLL changing rate because its frequency setting
> is different from other PLLs.
> 
> changes since v2:
> - Rebase to 4.2-rc1.
> - Split fixes of PLL setting calculation to a separeted patch.
> 
> changes since v1:
> - Add a separated patch for mtk_pll_set_rate_regs().
> - Use a structure array to describe a div_table.
> - Limit max frequency to div_table[0].
> - Minor changes such as static and comments.
> 
> [1] https://lkml.org/lkml/2015/7/8/265
> 
> James Liao (3):
>   clk: mediatek: Fix PLL registers setting flow
>   clk: mediatek: Fix calculation of PLL rate settings
>   clk: mediatek: Add MT8173 MMPLL change rate support

Acked-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html