Re: [PATCH v7 3/5] clk: Supply the critical clock {init, enable, disable} framework

[Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]

On Mon, 27 Jul 2015, Maxime Ripard wrote:

> On Wed, Jul 22, 2015 at 02:04:13PM +0100, Lee Jones wrote:
> > These new API calls will firstly provide a mechanisms to tag a clock as
> > critical and secondly allow any knowledgeable driver to (un)gate clocks,
> > even if they are marked as critical.
> > 
> > Suggested-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> > Signed-off-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > ---
> >  drivers/clk/clk.c            | 45 ++++++++++++++++++++++++++++++++++++++++++++
> >  include/linux/clk-provider.h |  2 ++
> >  include/linux/clk.h          | 30 +++++++++++++++++++++++++++++
> >  3 files changed, 77 insertions(+)
> > 
> > diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> > index 61c3fc5..486b1da 100644
> > --- a/drivers/clk/clk.c
> > +++ b/drivers/clk/clk.c
> > @@ -46,6 +46,21 @@ static struct clk_core *clk_core_lookup(const char *name);
> >  
> >  /***    private data structures    ***/
> >  
> > +/**
> > + * struct critical -	Provides 'play' over critical clocks.  A clock can be
> > + *			marked as critical, meaning that it should not be
> > + *			disabled.  However, if a driver which is aware of the
> > + *			critical behaviour wants to control it, it can do so
> > + *			using clk_enable_critical() and clk_disable_critical().
> > + *
> > + * @enabled	Is clock critical?  Once set, doesn't change
> > + * @leave_on	Self explanatory.  Can be disabled by knowledgeable drivers
> > + */
> > +struct critical {
> > +	bool enabled;
> > +	bool leave_on;
> > +};
> > +
> >  struct clk_core {
> >  	const char		*name;
> >  	const struct clk_ops	*ops;
> > @@ -75,6 +90,7 @@ struct clk_core {
> >  	struct dentry		*dentry;
> >  #endif
> >  	struct kref		ref;
> > +	struct critical		critical;
> >  };
> >  
> >  struct clk {
> > @@ -995,6 +1011,10 @@ static void clk_core_disable(struct clk_core *clk)
> >  	if (WARN_ON(clk->enable_count == 0))
> >  		return;
> >  
> > +	/* Refuse to turn off a critical clock */
> > +	if (clk->enable_count == 1 && clk->critical.leave_on)
> > +		return;
> > +
> 
> I think it should be handled by a separate counting. Otherwise, if you
> have two users that marked the clock as critical, and then one of them
> disable it...
> 
> >  	if (--clk->enable_count > 0)
> >  		return;
> >  
> > @@ -1037,6 +1057,13 @@ void clk_disable(struct clk *clk)
> >  }
> >  EXPORT_SYMBOL_GPL(clk_disable);
> >  
> > +void clk_disable_critical(struct clk *clk)
> > +{
> > +	clk->core->critical.leave_on = false;
> 
> .. you just lost the fact that it was critical in the first place.

I thought about both of these points, which is why I came up with this
strategy.

Any device which uses the *_critical() API should a) have knowledge of
what happens when a particular critical clock is gated and b) have
thought about the consequences.  I don't think we can use reference
counting, because we'd need as many critical clock owners as there are
critical clocks.  Cast your mind back to the reasons for this critical
clock API.  One of the most important intentions of this API is the
requirement mitigation for each of the critical clocks to have an owner
(driver).

With regards to your second point, that's what 'critical.enabled'
is for.  Take a look at clk_enable_critical().

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html