Re: [PATCH 0/3] MAX6675 IIO temperature driver

[Matt Porter <mporter@konsulko.com>]

On Wed, Aug 05, 2015 at 11:33:25AM +0300, Daniel Baluta wrote:
> On Tue, Aug 4, 2015 at 8:34 PM, Matt Porter <mporter@konsulko.com> wrote:
> > On Tue, Aug 04, 2015 at 05:52:17PM +0100, Jonathan Cameron wrote:
> >>
> >>
> >> On 3 August 2015 21:56:47 BST, Matt Porter <mporter@konsulko.com> wrote:
> >> >This series adds a driver for the MAX6675 SPI thermocouple converter.
> >> >The device supports temperature measurements via type-K thermocouples
> >> >and implements cold-junction compensation within the part. The
> >> >datasheet
> >> >can be found at http://datasheets.maximintegrated.com/en/ds/MAX6675.pdf
> >> For a device like this where perhaps it's position wrt iio/hwmon boundary is unclear
> >> I want to see an argument for why IIO makes more sense in the cover letter + cc
> >>  at least the hwmon MAINTAINERS if not the list...
> >
> > Will do. Just to summarize here, the typical use case for this type of
> > thermocouple converter involves sample rates that are relatively high
> > compared to what the hwmon interface can support. The upcoming hrtimer
> > trigger will match up well with this to support fine-grained
> > periodic samples. I'll add this in the v2 cover latter.
> 
> Are we talking about this hrtimer trigger patches:
> 
> http://marc.info/?l=linux-iio&m=143109196107382&w=2
> 
> Right? I've been busy with some other things, but I hope to have a
> final version by Sunday :).

That's it! Thanks. :)

-Matt