From: Jisheng Zhang <jszhang@marvell.com>
To: dinguyen@opensource.altera.com
Cc: robh+dt@kernel.org, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org, mark.rutland@arm.com, pawel.moll@arm.com,
catalin.marinas@arm.com, will.deacon@arm.com,
devicetree@vger.kernel.org, dinh.linux@gmail.com,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] arm64: dts: Add base stratix 10 dtsi
Date: Tue, 11 Aug 2015 10:39:02 +0800 [thread overview]
Message-ID: <20150811103902.38cbcb6d@xhacker> (raw)
In-Reply-To: <1439240958-4713-1-git-send-email-dinguyen@opensource.altera.com>
On Mon, 10 Aug 2015 16:09:18 -0500
<dinguyen@opensource.altera.com> wrote:
> From: Dinh Nguyen <dinguyen@opensource.altera.com>
>
> Add the base DTS for Altera's SoCFPGA Stratix 10 platform.
>
> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
> ---
> arch/arm64/Kconfig | 5 +
> arch/arm64/boot/dts/Makefile | 1 +
> arch/arm64/boot/dts/altera/Makefile | 5 +
> arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 354 +++++++++++++++++++++
> .../boot/dts/altera/socfpga_stratix10_socdk.dts | 38 +++
> arch/arm64/configs/defconfig | 1 +
> 6 files changed, 404 insertions(+)
> create mode 100644 arch/arm64/boot/dts/altera/Makefile
> create mode 100644 arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
> create mode 100644 arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 318175f..0f8ab2b 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -207,6 +207,11 @@ config ARCH_SEATTLE
> help
> This enables support for AMD Seattle SOC Family
>
> +config ARCH_STRATIX10
> + bool "Altera's Stratix 10 SoCFPGA Family"
> + help
> + This enables support for Altera's Stratix 10 SoCFPGA Family
> +
> config ARCH_TEGRA
> bool "NVIDIA Tegra SoC Family"
> select ARCH_HAS_RESET_CONTROLLER
> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> index 38913be..7fb421a 100644
> --- a/arch/arm64/boot/dts/Makefile
> +++ b/arch/arm64/boot/dts/Makefile
> @@ -1,3 +1,4 @@
> +dts-dirs += altera
> dts-dirs += amd
> dts-dirs += apm
> dts-dirs += arm
> diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile
> new file mode 100644
> index 0000000..d7a6416
> --- /dev/null
> +++ b/arch/arm64/boot/dts/altera/Makefile
> @@ -0,0 +1,5 @@
> +dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb
> +
> +always := $(dtb-y)
> +subdir-y := $(dts-dirs)
> +clean-files := *.dtb
> diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
> new file mode 100644
> index 0000000..34f6dc3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
> @@ -0,0 +1,354 @@
> +/*
> + * Copyright Altera Corporation (C) 2015. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +/dts-v1/;
> +
> +/ {
> + compatible = "altr,socfpga-stratix10";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
[...]
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <0 120 8>,
> + <0 121 8>,
> + <0 122 8>,
> + <0 123 8>;
it's better to add interrupt-affinity according to Sudeep's suggestions.
> + };
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + intc: intc@ffff8000 {
> + compatible = "arm,gic-400", "arm,cortex-a15-gic";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x0 0xffff9000 0x1000>,
> + <0x0 0xffffa000 0x2000>,
> + <0x0 0xffffc000 0x1000>,
> + <0x0 0xffffd000 0x1000>;
> + };
> +
> + soc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + device_type = "soc";
> + interrupt-parent = <&intc>;
> + ranges;
> +
> + clkmgr@ffd1000 {
> + compatible = "altr,clk-mgr";
> + reg = <0xffd10000 0x1000>;
> + };
> +
> + gmac0: ethernet@ff800000 {
> + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
> + reg = <0xff800000 0x2000>;
> + interrupts = <0 90 4>;
> + interrupt-names = "macirq";
> + mac-address = [00 00 00 00 00 00];
> + status = "disabled";
> + };
> +
> + gmac1: ethernet@ff802000 {
> + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
> + reg = <0xff802000 0x2000>;
> + interrupts = <0 91 4>;
> + interrupt-names = "macirq";
> + mac-address = [00 00 00 00 00 00];
> + status = "disabled";
> + };
> +
> + gmac2: ethernet@ff804000 {
> + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
> + reg = <0xff804000 0x2000>;
> + interrupts = <0 92 4>;
> + interrupt-names = "macirq";
> + mac-address = [00 00 00 00 00 00];
> + status = "disabled";
> + };
> +
> + gpio0: gpio@ffc03200 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dw-apb-gpio";
> + reg = <0xffc03200 0x100>;
> + status = "disabled";
> +
> + porta: gpio-controller@0 {
> + compatible = "snps,dw-apb-gpio-port";
> + gpio-controller;
> + #gpio-cells = <2>;
> + snps,nr-gpios = <24>;
> + reg = <0>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <0 110 4>;
> + };
> + };
> +
> + gpio1: gpio@ffc03300 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dw-apb-gpio";
> + reg = <0xffc03300 0x100>;
> + status = "disabled";
> +
> + portb: gpio-controller@0 {
> + compatible = "snps,dw-apb-gpio-port";
> + gpio-controller;
> + #gpio-cells = <2>;
> + snps,nr-gpios = <24>;
> + reg = <0>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <0 110 4>;
> + };
> + };
> +
> + i2c0: i2c@ffc02800 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,designware-i2c";
> + reg = <0xffc02800 0x100>;
> + interrupts = <0 103 4>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@ffc02900 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,designware-i2c";
> + reg = <0xffc02900 0x100>;
> + interrupts = <0 104 4>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@ffc02a00 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,designware-i2c";
> + reg = <0xffc02a00 0x100>;
> + interrupts = <0 105 4>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c@ffc02b00 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,designware-i2c";
> + reg = <0xffc02b00 0x100>;
> + interrupts = <0 106 4>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c@ffc02c00 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,designware-i2c";
> + reg = <0xffc02c00 0x100>;
> + interrupts = <0 107 4>;
> + status = "disabled";
> + };
> +
> + mmc: dwmmc0@ff808000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "altr,socfpga-dw-mshc";
> + reg = <0xff808000 0x1000>;
> + interrupts = <0 96 4>;
> + fifo-depth = <0x400>;
> + status = "disabled";
> + };
> +
> + ocram: sram@ffe00000 {
> + compatible = "mmio-sram";
> + reg = <0xffe00000 0x100000>;
> + };
> +
> + rst: rstmgr@ffd11000 {
> + #reset-cells = <1>;
> + compatible = "altr,rst-mgr";
> + reg = <0xffd11000 0x1000>;
> + };
> +
> + spi0: spi@ffda4000 {
> + compatible = "snps,dw-apb-ssi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0xffda4000 0x1000>;
> + interrupts = <0 101 4>;
> + num-chipselect = <4>;
> + bus-num = <0>;
> + status = "disabled";
> + };
> +
> + spi1: spi@ffda5000 {
> + compatible = "snps,dw-apb-ssi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0xffda5000 0x1000>;
> + interrupts = <0 102 4>;
> + num-chipselect = <4>;
> + bus-num = <0>;
> + status = "disabled";
> + };
> +
> + sysmgr: sysmgr@ffd12000 {
> + compatible = "altr,sys-mgr", "syscon";
> + reg = <0xffd12000 0x1000>;
> + };
> +
> + /* Local timer */
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <1 13 0xf01>,
> + <1 14 0xf01>,
> + <1 11 0xf01>,
> + <1 10 0xf01>;
> + };
> +
> + timer0: timer0@ffc03000 {
> + compatible = "snps,dw-apb-timer";
> + interrupts = <0 113 4>;
> + reg = <0xffc03000 0x100>;
> + };
> +
> + timer1: timer1@ffc03100 {
> + compatible = "snps,dw-apb-timer";
> + interrupts = <0 114 4>;
> + reg = <0xffc03100 0x100>;
> + };
> +
> + timer2: timer2@ffd00000 {
> + compatible = "snps,dw-apb-timer";
> + interrupts = <0 115 4>;
> + reg = <0xffd00000 0x100>;
> + };
> +
> + timer3: timer3@ffd00100 {
> + compatible = "snps,dw-apb-timer";
> + interrupts = <0 116 4>;
> + reg = <0xffd00100 0x100>;
> + };
> +
> + uart0: serial0@ffc02000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0xffc02000 0x100>;
> + interrupts = <0 108 4>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart1: serial1@ffc02100 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0xffc02100 0x100>;
> + interrupts = <0 109 4>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + usbphy0: usbphy@0 {
> + #phy-cells = <0>;
> + compatible = "usb-nop-xceiv";
> + status = "okay";
> + };
> +
> + usb0: usb@ffb00000 {
> + compatible = "snps,dwc2";
> + reg = <0xffb00000 0x40000>;
> + interrupts = <0 93 4>;
> + phys = <&usbphy0>;
> + phy-names = "usb2-phy";
> + status = "disabled";
> + };
> +
> + usb1: usb@ffb40000 {
> + compatible = "snps,dwc2";
> + reg = <0xffb40000 0x40000>;
> + interrupts = <0 94 4>;
> + phys = <&usbphy0>;
> + phy-names = "usb2-phy";
> + status = "disabled";
> + };
> +
> + watchdog0: watchdog@ffd00200 {
> + compatible = "snps,dw-wdt";
> + reg = <0xffd00200 0x100>;
> + interrupts = <0 117 4>;
> + status = "disabled";
> + };
> +
> + watchdog1: watchdog@ffd00300 {
> + compatible = "snps,dw-wdt";
> + reg = <0xffd00300 0x100>;
> + interrupts = <0 118 4>;
> + status = "disabled";
> + };
> +
> + watchdog2: watchdog@ffd00400 {
> + compatible = "snps,dw-wdt";
> + reg = <0xffd00400 0x100>;
> + interrupts = <0 125 4>;
> + status = "disabled";
> + };
> +
> + watchdog3: watchdog@ffd00500 {
> + compatible = "snps,dw-wdt";
> + reg = <0xffd00500 0x100>;
> + interrupts = <0 126 4>;
> + status = "disabled";
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
> new file mode 100644
> index 0000000..8b162ef
> --- /dev/null
> +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
> @@ -0,0 +1,38 @@
> +/*
> + * Copyright Altera Corporation (C) 2015. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +/include/ "socfpga_stratix10.dtsi"
> +
> +/ {
> + model = "SoCFPGA Stratix 10 SoCDK";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x0 0x40000000>;
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 4e17e7e..ad3b636 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -36,6 +36,7 @@ CONFIG_ARCH_FSL_LS2085A=y
> CONFIG_ARCH_HISI=y
> CONFIG_ARCH_MEDIATEK=y
> CONFIG_ARCH_SEATTLE=y
> +CONFIG_ARCH_STRATIX10=y
> CONFIG_ARCH_TEGRA=y
> CONFIG_ARCH_TEGRA_132_SOC=y
> CONFIG_ARCH_QCOM=y
next prev parent reply other threads:[~2015-08-11 2:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-10 21:09 [PATCH] arm64: dts: Add base stratix 10 dtsi dinguyen
2015-08-11 2:39 ` Jisheng Zhang [this message]
2015-08-11 13:32 ` Dinh Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150811103902.38cbcb6d@xhacker \
--to=jszhang@marvell.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@opensource.altera.com \
--cc=dinh.linux@gmail.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).