public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Cc: cw00.choi@samsung.com, patches@opensource.wolfsonmicro.com,
	devicetree@vger.kernel.org, myungjoo.ham@samsung.com,
	sameo@linux.intel.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH RESEND 1/5] mfd: arizona: Add registers for ADC microphone detection
Date: Wed, 12 Aug 2015 09:23:04 +0100	[thread overview]
Message-ID: <20150812082304.GY18282@x1> (raw)
In-Reply-To: <1439280844-9808-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>

On Tue, 11 Aug 2015, Charles Keepax wrote:

> The newer devices support using a software comparison to determine
> whether a 3/4 pole jack is present. Add the registers necessary for
> this.
> 
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
> 
> Hi,
> 
> The first two MFD patches and the two extcon patches need to
> go through together as there are build dependencies. However
> the last documentation update can be treated seperately.
> 
> The patches are based of the extcon/extcon-next tree because
> that is where most of the changes are but let me know if an
> MFD based version would be preferred.
> 
> Thanks,
> Charles
> 
>  drivers/mfd/wm5110-tables.c           |    2 ++
>  include/dt-bindings/mfd/arizona.h     |    2 ++
>  include/linux/mfd/arizona/pdata.h     |    3 +++
>  include/linux/mfd/arizona/registers.h |   17 ++++++++++++++---
>  4 files changed, 21 insertions(+), 3 deletions(-)

Acked-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
> index 12cad94..dd27872 100644
> --- a/drivers/mfd/wm5110-tables.c
> +++ b/drivers/mfd/wm5110-tables.c
> @@ -1807,6 +1807,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
>  	case ARIZONA_MIC_DETECT_1:
>  	case ARIZONA_MIC_DETECT_2:
>  	case ARIZONA_MIC_DETECT_3:
> +	case ARIZONA_MIC_DETECT_4:
>  	case ARIZONA_MIC_DETECT_LEVEL_1:
>  	case ARIZONA_MIC_DETECT_LEVEL_2:
>  	case ARIZONA_MIC_DETECT_LEVEL_3:
> @@ -2843,6 +2844,7 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg)
>  	case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
>  	case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS:
>  	case ARIZONA_MIC_DETECT_3:
> +	case ARIZONA_MIC_DETECT_4:
>  	case ARIZONA_HP_CTRL_1L:
>  	case ARIZONA_HP_CTRL_1R:
>  	case ARIZONA_HEADPHONE_DETECT_2:
> diff --git a/include/dt-bindings/mfd/arizona.h b/include/dt-bindings/mfd/arizona.h
> index 7b2000c..c40f665 100644
> --- a/include/dt-bindings/mfd/arizona.h
> +++ b/include/dt-bindings/mfd/arizona.h
> @@ -107,5 +107,7 @@
>  #define ARIZONA_ACCDET_MODE_MIC 0
>  #define ARIZONA_ACCDET_MODE_HPL 1
>  #define ARIZONA_ACCDET_MODE_HPR 2
> +#define ARIZONA_ACCDET_MODE_HPM 4
> +#define ARIZONA_ACCDET_MODE_ADC 7
>  
>  #endif
> diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
> index 43db4fa..f030a32 100644
> --- a/include/linux/mfd/arizona/pdata.h
> +++ b/include/linux/mfd/arizona/pdata.h
> @@ -124,6 +124,9 @@ struct arizona_pdata {
>  	/** Channel to use for headphone detection */
>  	unsigned int hpdet_channel;
>  
> +	/** Use software comparison to determine mic presence */
> +	bool micd_software_compare;
> +
>  	/** Extra debounce timeout used during initial mic detection (ms) */
>  	int micd_detect_debounce;
>  
> diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
> index 3499d36..3f3bb2b 100644
> --- a/include/linux/mfd/arizona/registers.h
> +++ b/include/linux/mfd/arizona/registers.h
> @@ -139,6 +139,7 @@
>  #define ARIZONA_MIC_DETECT_LEVEL_2		 0x2A7
>  #define ARIZONA_MIC_DETECT_LEVEL_3		 0x2A8
>  #define ARIZONA_MIC_DETECT_LEVEL_4		 0x2A9
> +#define ARIZONA_MIC_DETECT_4                     0x2AB
>  #define ARIZONA_MIC_NOISE_MIX_CONTROL_1          0x2C3
>  #define ARIZONA_ISOLATION_CONTROL                0x2CB
>  #define ARIZONA_JACK_DETECT_ANALOGUE             0x2D3
> @@ -2301,9 +2302,9 @@
>  #define ARIZONA_ACCDET_SRC_MASK                  0x2000  /* ACCDET_SRC */
>  #define ARIZONA_ACCDET_SRC_SHIFT                     13  /* ACCDET_SRC */
>  #define ARIZONA_ACCDET_SRC_WIDTH                      1  /* ACCDET_SRC */
> -#define ARIZONA_ACCDET_MODE_MASK                 0x0003  /* ACCDET_MODE - [1:0] */
> -#define ARIZONA_ACCDET_MODE_SHIFT                     0  /* ACCDET_MODE - [1:0] */
> -#define ARIZONA_ACCDET_MODE_WIDTH                     2  /* ACCDET_MODE - [1:0] */
> +#define ARIZONA_ACCDET_MODE_MASK                 0x0007  /* ACCDET_MODE - [2:0] */
> +#define ARIZONA_ACCDET_MODE_SHIFT                     0  /* ACCDET_MODE - [2:0] */
> +#define ARIZONA_ACCDET_MODE_WIDTH                     3  /* ACCDET_MODE - [2:0] */
>  
>  /*
>   * R667 (0x29B) - Headphone Detect 1
> @@ -2413,6 +2414,16 @@
>  #define ARIZONA_MICD_STS_WIDTH                        1  /* MICD_STS */
>  
>  /*
> + * R683 (0x2AB) - Mic Detect 4
> + */
> +#define ARIZONA_MICDET_ADCVAL_DIFF_MASK          0xFF00  /* MICDET_ADCVAL_DIFF - [15:8] */
> +#define ARIZONA_MICDET_ADCVAL_DIFF_SHIFT              8  /* MICDET_ADCVAL_DIFF - [15:8] */
> +#define ARIZONA_MICDET_ADCVAL_DIFF_WIDTH              8  /* MICDET_ADCVAL_DIFF - [15:8] */
> +#define ARIZONA_MICDET_ADCVAL_MASK               0x007F  /* MICDET_ADCVAL - [15:8] */
> +#define ARIZONA_MICDET_ADCVAL_SHIFT                   0  /* MICDET_ADCVAL - [15:8] */
> +#define ARIZONA_MICDET_ADCVAL_WIDTH                   7  /* MICDET_ADCVAL - [15:8] */
> +
> +/*
>   * R707 (0x2C3) - Mic noise mix control 1
>   */
>  #define ARIZONA_MICMUTE_RATE_MASK                0x7800  /* MICMUTE_RATE - [14:11] */

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  parent reply	other threads:[~2015-08-12  8:23 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-11  8:14 [PATCH RESEND 1/5] mfd: arizona: Add registers for ADC microphone detection Charles Keepax
2015-08-11  8:14 ` [PATCH RESEND 2/5] extcon: arizona: Add support for new ADC value headphone detect Charles Keepax
     [not found] ` <1439280844-9808-1-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2015-08-11  8:14   ` [PATCH RESEND 3/5] mfd: arizona: Add register bits for general purpose switch Charles Keepax
2015-08-12  8:23     ` Lee Jones
2015-08-11  8:14   ` [PATCH RESEND 5/5] mfd: arizona: Update DT doc for new mic detection bindings Charles Keepax
2015-08-12  8:22     ` Lee Jones
2015-08-11  8:14 ` [PATCH RESEND 4/5] extcon: arizona: Add support for general purpose switch Charles Keepax
2015-08-12  8:23 ` Lee Jones [this message]
  -- strict thread matches above, loose matches on Subject: below --
2015-09-09  8:34 [PATCH RESEND 1/5] mfd: arizona: Add registers for ADC microphone detection Charles Keepax
     [not found] ` <1441787690-30148-1-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2015-09-11  7:57   ` Chanwoo Choi
2015-09-11  8:58     ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150812082304.GY18282@x1 \
    --to=lee.jones@linaro.org \
    --cc=ckeepax@opensource.wolfsonmicro.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=patches@opensource.wolfsonmicro.com \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox