[PATCH v2 0/2] Add display timing for Okaya RS800480T-7X0

[PATCH v2 0/2] Add display timing for Okaya RS800480T-7X0

[Gary Bisson]

Hi all,

This patch is the follow-up of a request from Philipp to add the Okaya display
to the simple panel driver.
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-May/346657.html

v2:
- split into 2 patches, adding Okaya to the vendor prefixes should be its own
patch as suggested by Thierry
https://patchwork.kernel.org/patch/6503261/

Regards,
Gary

Gary Bisson (2):
  of: add Okaya Electric America vendor prefix
  drm/panel: Add display timing for Okaya RS800480T-7X0GP

 .../bindings/panel/okaya,rs800480t_7x0gp.txt       |  7 ++++++
 .../devicetree/bindings/vendor-prefixes.txt        |  1 +
 drivers/gpu/drm/panel/panel-simple.c               | 27 ++++++++++++++++++++++
 3 files changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt

-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 1/2] of: add Okaya Electric America vendor prefix

[Gary Bisson]

This patch adds vendor prefix for Okaya Electronic America, a provider
of LCD modules and display technologies.

Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ee2ce7b..37d2de79 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -148,6 +148,7 @@ nintendo	Nintendo
 nokia	Nokia
 nvidia	NVIDIA
 nxp	NXP Semiconductors
+okaya	Okaya Electric America, Inc.
 onnn	ON Semiconductor Corp.
 opencores	OpenCores.org
 ortustech	Ortus Technology Co., Ltd.
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/2] of: add Okaya Electric America vendor prefix

[Rob Herring]

On Tue, Jun 9, 2015 at 10:59 AM, Gary Bisson
<gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> wrote:
> This patch adds vendor prefix for Okaya Electronic America, a provider
> of LCD modules and display technologies.
>
> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

> ---
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index ee2ce7b..37d2de79 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -148,6 +148,7 @@ nintendo    Nintendo
>  nokia  Nokia
>  nvidia NVIDIA
>  nxp    NXP Semiconductors
> +okaya  Okaya Electric America, Inc.
>  onnn   ON Semiconductor Corp.
>  opencores      OpenCores.org
>  ortustech      Ortus Technology Co., Ltd.
> --
> 2.1.4
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 2/2] drm/panel: Add display timing for Okaya RS800480T-7X0GP

[Gary Bisson]

Add support for the Okaya RS800480T-7X0GP to the DRM simple panel
driver.

The RS800480T-7X0GP is a WVGA (800x480) panel with an 18-bit parallel
LCD interface. It supports pixel clocks in the range of 30-40 MHz.

This panel details can be found at:
http://boundarydevices.com/product/7-800x480-display/

Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
 .../bindings/panel/okaya,rs800480t_7x0gp.txt       |  7 ++++++
 drivers/gpu/drm/panel/panel-simple.c               | 27 ++++++++++++++++++++++
 2 files changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt

diff --git a/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt b/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
new file mode 100644
index 0000000..f7c729d
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
@@ -0,0 +1,7 @@
+OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
+
+Required properties:
+- compatible: should be "okaya,rs800480t_7x0gp"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 97b66b8..e511a22 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -942,6 +942,30 @@ static const struct panel_desc lg_lp129qe = {
 	},
 };
 
+static const struct display_timing okaya_rs800480t_7x0gp_timing = {
+	.pixelclock = { 30000000, 30000000, 40000000 },
+	.hactive = { 800, 800, 800 },
+	.hfront_porch = { 40, 40, 40 },
+	.hback_porch = { 40, 40, 40 },
+	.hsync_len = { 1, 48, 48 },
+	.vactive = { 480, 480, 480 },
+	.vfront_porch = { 13, 13, 13 },
+	.vback_porch = { 29, 29, 29 },
+	.vsync_len = { 3, 3, 3 },
+	.flags = DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc okaya_rs800480t_7x0gp = {
+	.timings = &okaya_rs800480t_7x0gp_timing,
+	.num_timings = 1,
+	.bpc = 6,
+	.size = {
+		.width = 154,
+		.height = 87,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+};
+
 static const struct drm_display_mode ortustech_com43h4m85ulc_mode  = {
 	.clock = 25000,
 	.hdisplay = 480,
@@ -1112,6 +1136,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "lg,lp129qe",
 		.data = &lg_lp129qe,
 	}, {
+		.compatible = "okaya,rs800480t_7x0gp",
+		.data = &okaya_rs800480t_7x0gp,
+	}, {
 		.compatible = "ortustech,com43h4m85ulc",
 		.data = &ortustech_com43h4m85ulc,
 	}, {
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 2/2] drm/panel: Add display timing for Okaya RS800480T-7X0GP

[Philipp Zabel]

Hi Gary,

Am Dienstag, den 09.06.2015, 17:59 +0200 schrieb Gary Bisson:
> Add support for the Okaya RS800480T-7X0GP to the DRM simple panel
> driver.
> 
> The RS800480T-7X0GP is a WVGA (800x480) panel with an 18-bit parallel
> LCD interface. It supports pixel clocks in the range of 30-40 MHz.
> 
> This panel details can be found at:
> http://boundarydevices.com/product/7-800x480-display/
> 
> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
> ---
>  .../bindings/panel/okaya,rs800480t_7x0gp.txt       |  7 ++++++
>  drivers/gpu/drm/panel/panel-simple.c               | 27 ++++++++++++++++++++++
>  2 files changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
> 
> diff --git a/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt b/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
> new file mode 100644
> index 0000000..f7c729d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
> @@ -0,0 +1,7 @@
> +OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
> +
> +Required properties:
> +- compatible: should be "okaya,rs800480t_7x0gp"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 97b66b8..e511a22 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -942,6 +942,30 @@ static const struct panel_desc lg_lp129qe = {
>  	},
>  };
>  
> +static const struct display_timing okaya_rs800480t_7x0gp_timing = {
> +	.pixelclock = { 30000000, 30000000, 40000000 },
> +	.hactive = { 800, 800, 800 },
> +	.hfront_porch = { 40, 40, 40 },
> +	.hback_porch = { 40, 40, 40 },
> +	.hsync_len = { 1, 48, 48 },
> +	.vactive = { 480, 480, 480 },
> +	.vfront_porch = { 13, 13, 13 },
> +	.vback_porch = { 29, 29, 29 },
> +	.vsync_len = { 3, 3, 3 },
> +	.flags = DISPLAY_FLAGS_DE_HIGH,
> +};
> +
> +static const struct panel_desc okaya_rs800480t_7x0gp = {
> +	.timings = &okaya_rs800480t_7x0gp_timing,
> +	.num_timings = 1,
> +	.bpc = 6,
> +	.size = {
> +		.width = 154,
> +		.height = 87,
> +	},

Are there any poweron/poweroff sequencing delays in the datasheet that
should be met? Parallel displays often specify a few ms delay after the
voltage supply is stable and before pixel data should be driven on the
bus (.delay.prepare), as well as afterwards, before activating the
backlight (.delay.enable).

regards
Philipp

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 2/2] drm/panel: Add display timing for Okaya RS800480T-7X0GP

[Gary Bisson]

Hi Philipp,

On Tue, Jun 9, 2015 at 7:39 PM, Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> wrote:
> Hi Gary,
>
> Am Dienstag, den 09.06.2015, 17:59 +0200 schrieb Gary Bisson:
>> Add support for the Okaya RS800480T-7X0GP to the DRM simple panel
>> driver.
>>
>> The RS800480T-7X0GP is a WVGA (800x480) panel with an 18-bit parallel
>> LCD interface. It supports pixel clocks in the range of 30-40 MHz.
>>
>> This panel details can be found at:
>> http://boundarydevices.com/product/7-800x480-display/
>>
>> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
>> ---
>>  .../bindings/panel/okaya,rs800480t_7x0gp.txt       |  7 ++++++
>>  drivers/gpu/drm/panel/panel-simple.c               | 27 ++++++++++++++++++++++
>>  2 files changed, 34 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
>>
>> diff --git a/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt b/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
>> new file mode 100644
>> index 0000000..f7c729d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
>> @@ -0,0 +1,7 @@
>> +OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
>> +
>> +Required properties:
>> +- compatible: should be "okaya,rs800480t_7x0gp"
>> +
>> +This binding is compatible with the simple-panel binding, which is specified
>> +in simple-panel.txt in this directory.
>> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
>> index 97b66b8..e511a22 100644
>> --- a/drivers/gpu/drm/panel/panel-simple.c
>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>> @@ -942,6 +942,30 @@ static const struct panel_desc lg_lp129qe = {
>>       },
>>  };
>>
>> +static const struct display_timing okaya_rs800480t_7x0gp_timing = {
>> +     .pixelclock = { 30000000, 30000000, 40000000 },
>> +     .hactive = { 800, 800, 800 },
>> +     .hfront_porch = { 40, 40, 40 },
>> +     .hback_porch = { 40, 40, 40 },
>> +     .hsync_len = { 1, 48, 48 },
>> +     .vactive = { 480, 480, 480 },
>> +     .vfront_porch = { 13, 13, 13 },
>> +     .vback_porch = { 29, 29, 29 },
>> +     .vsync_len = { 3, 3, 3 },
>> +     .flags = DISPLAY_FLAGS_DE_HIGH,
>> +};
>> +
>> +static const struct panel_desc okaya_rs800480t_7x0gp = {
>> +     .timings = &okaya_rs800480t_7x0gp_timing,
>> +     .num_timings = 1,
>> +     .bpc = 6,
>> +     .size = {
>> +             .width = 154,
>> +             .height = 87,
>> +     },
>
> Are there any poweron/poweroff sequencing delays in the datasheet that
> should be met? Parallel displays often specify a few ms delay after the
> voltage supply is stable and before pixel data should be driven on the
> bus (.delay.prepare), as well as afterwards, before activating the
> backlight (.delay.enable).

You are right I forgot to add those delays. I will submit a v3.

That gives prepare = unprepare = 40.5ms (rounded up to 41) and enable
= disable = 50ms based on the values provided at page 6/20 of the
following doc:
http://boundarydevices.com/datasheets/RS800480T-7X0GP-A.pdf

Regards,
Gary
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 0/2] Add display timing for Okaya RS800480T-7X0

[Gary Bisson]

Hi all,

This patch is the follow-up of a request from Philipp to add the Okaya display
to the simple panel driver.
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-May/346657.html

v2:
- split into 2 patches, adding Okaya to the vendor prefixes should be its own
patch as suggested by Thierry
https://patchwork.kernel.org/patch/6503261/

v3:
- add poweron/poweroff sequencing delays as suggested by Philipp. Values are
based on datasheet available at:
http://boundarydevices.com/datasheets/RS800480T-7X0GP-A.pdf

Regards,
Gary

Gary Bisson (2):
  of: add Okaya Electric America vendor prefix
  drm/panel: Add display timing for Okaya RS800480T-7X0GP

 .../bindings/panel/okaya,rs800480t_7x0gp.txt       |  7 +++++
 .../devicetree/bindings/vendor-prefixes.txt        |  1 +
 drivers/gpu/drm/panel/panel-simple.c               | 33 ++++++++++++++++++++++
 3 files changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt

-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 1/2] of: add Okaya Electric America vendor prefix

[Gary Bisson]

This patch adds vendor prefix for Okaya Electronic America, a provider
of LCD modules and display technologies.

Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ee2ce7b..37d2de79 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -148,6 +148,7 @@ nintendo	Nintendo
 nokia	Nokia
 nvidia	NVIDIA
 nxp	NXP Semiconductors
+okaya	Okaya Electric America, Inc.
 onnn	ON Semiconductor Corp.
 opencores	OpenCores.org
 ortustech	Ortus Technology Co., Ltd.
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 1/2] of: add Okaya Electric America vendor prefix

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 385 bytes --]

On Wed, Jun 10, 2015 at 06:44:22PM +0200, Gary Bisson wrote:
> This patch adds vendor prefix for Okaya Electronic America, a provider
> of LCD modules and display technologies.
> 
> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)

Applied, thanks.

Thierry

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 2/2] drm/panel: Add display timing for Okaya RS800480T-7X0GP

[Gary Bisson]

Add support for the Okaya RS800480T-7X0GP to the DRM simple panel
driver.

The RS800480T-7X0GP is a WVGA (800x480) panel with an 18-bit parallel
LCD interface. It supports pixel clocks in the range of 30-40 MHz.

This panel details can be found at:
http://boundarydevices.com/product/7-800x480-display/

Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
 .../bindings/panel/okaya,rs800480t_7x0gp.txt       |  7 +++++
 drivers/gpu/drm/panel/panel-simple.c               | 33 ++++++++++++++++++++++
 2 files changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt

diff --git a/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt b/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
new file mode 100644
index 0000000..f7c729d
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
@@ -0,0 +1,7 @@
+OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
+
+Required properties:
+- compatible: should be "okaya,rs800480t_7x0gp"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index f94201b..5262be1 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -943,6 +943,36 @@ static const struct panel_desc lg_lp129qe = {
 	},
 };
 
+static const struct display_timing okaya_rs800480t_7x0gp_timing = {
+	.pixelclock = { 30000000, 30000000, 40000000 },
+	.hactive = { 800, 800, 800 },
+	.hfront_porch = { 40, 40, 40 },
+	.hback_porch = { 40, 40, 40 },
+	.hsync_len = { 1, 48, 48 },
+	.vactive = { 480, 480, 480 },
+	.vfront_porch = { 13, 13, 13 },
+	.vback_porch = { 29, 29, 29 },
+	.vsync_len = { 3, 3, 3 },
+	.flags = DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc okaya_rs800480t_7x0gp = {
+	.timings = &okaya_rs800480t_7x0gp_timing,
+	.num_timings = 1,
+	.bpc = 6,
+	.size = {
+		.width = 154,
+		.height = 87,
+	},
+	.delay = {
+		.prepare = 41,
+		.enable = 50,
+		.unprepare = 41,
+		.disable = 50,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+};
+
 static const struct drm_display_mode ortustech_com43h4m85ulc_mode  = {
 	.clock = 25000,
 	.hdisplay = 480,
@@ -1113,6 +1143,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "lg,lp129qe",
 		.data = &lg_lp129qe,
 	}, {
+		.compatible = "okaya,rs800480t_7x0gp",
+		.data = &okaya_rs800480t_7x0gp,
+	}, {
 		.compatible = "ortustech,com43h4m85ulc",
 		.data = &ortustech_com43h4m85ulc,
 	}, {
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 2/2] drm/panel: Add display timing for Okaya RS800480T-7X0GP

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 1326 bytes --]

On Wed, Jun 10, 2015 at 06:44:23PM +0200, Gary Bisson wrote:
> Add support for the Okaya RS800480T-7X0GP to the DRM simple panel
> driver.
> 
> The RS800480T-7X0GP is a WVGA (800x480) panel with an 18-bit parallel
> LCD interface. It supports pixel clocks in the range of 30-40 MHz.
> 
> This panel details can be found at:
> http://boundarydevices.com/product/7-800x480-display/
> 
> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
> ---
>  .../bindings/panel/okaya,rs800480t_7x0gp.txt       |  7 +++++
>  drivers/gpu/drm/panel/panel-simple.c               | 33 ++++++++++++++++++++++
>  2 files changed, 40 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
> 
> diff --git a/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt b/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
> new file mode 100644
> index 0000000..f7c729d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
> @@ -0,0 +1,7 @@
> +OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
> +
> +Required properties:
> +- compatible: should be "okaya,rs800480t_7x0gp"

Underscores are not typically used in compatible strings, so I've
changed this to "okaya,rs800480t-7x0gp".

Thierry

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 2/2] drm/panel: Add display timing for Okaya RS800480T-7X0GP

[Gary Bisson]

Hi Thierry,

On Thu, Aug 13, 2015 at 2:32 PM, Thierry Reding
<thierry.reding@gmail.com> wrote:
> On Wed, Jun 10, 2015 at 06:44:23PM +0200, Gary Bisson wrote:
>> Add support for the Okaya RS800480T-7X0GP to the DRM simple panel
>> driver.
>>
>> The RS800480T-7X0GP is a WVGA (800x480) panel with an 18-bit parallel
>> LCD interface. It supports pixel clocks in the range of 30-40 MHz.
>>
>> This panel details can be found at:
>> http://boundarydevices.com/product/7-800x480-display/
>>
>> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
>> ---
>>  .../bindings/panel/okaya,rs800480t_7x0gp.txt       |  7 +++++
>>  drivers/gpu/drm/panel/panel-simple.c               | 33 ++++++++++++++++++++++
>>  2 files changed, 40 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
>>
>> diff --git a/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt b/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
>> new file mode 100644
>> index 0000000..f7c729d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
>> @@ -0,0 +1,7 @@
>> +OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
>> +
>> +Required properties:
>> +- compatible: should be "okaya,rs800480t_7x0gp"
>
> Underscores are not typically used in compatible strings, so I've
> changed this to "okaya,rs800480t-7x0gp".

Thanks! I'll make sure not to use underscores for such names in the future.

Regards,
Gary
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 0/2] Add display timing for Okaya RS800480T-7X0

[Gary Bisson]

Hi all,

On Wed, Jun 10, 2015 at 6:44 PM, Gary Bisson
<gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> wrote:
> Hi all,
>
> This patch is the follow-up of a request from Philipp to add the Okaya display
> to the simple panel driver.
> http://lists.infradead.org/pipermail/linux-arm-kernel/2015-May/346657.html
>
> v2:
> - split into 2 patches, adding Okaya to the vendor prefixes should be its own
> patch as suggested by Thierry
> https://patchwork.kernel.org/patch/6503261/
>
> v3:
> - add poweron/poweroff sequencing delays as suggested by Philipp. Values are
> based on datasheet available at:
> http://boundarydevices.com/datasheets/RS800480T-7X0GP-A.pdf

Now that Philipp's change that fixes the drm_panel support in the
parallel-display has been merged, would it be ok to merge the okaya
timings?
http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/?id=553a59fc

Regards,
Gary
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html