From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfram Sang Subject: Re: [PATCH v2 0/2] I2C support for NXP LPC18xx family Date: Wed, 19 Aug 2015 17:18:40 +0200 Message-ID: <20150819151838.GC1634@katana> References: <1439748617-7683-1-git-send-email-manabian@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1439748617-7683-1-git-send-email-manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: linux-i2c-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Joachim Eastwood Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On Sun, Aug 16, 2015 at 08:10:15PM +0200, Joachim Eastwood wrote: > This patch set adds a I2C driver and documentation for the I2C > peripheral found on many NXP LPC MCUs. > > The driver is a rework of an old driver by Kevin Wells. It has been > modified to support modern resource allocation, device tree and > generally cleaned up. Driver was originally written to support the > LPC2xxx platforms. > > Patches based on i2c/for-next and tested on Embedded Artists' LPC4357 > Dev Kit and Hitex LPC4350 Eval board with several I2C devices. > > This version address comments from Wolfram Sang. > > Changes since v1: > - remove dev_dbg() leftovers from development/debugging > - use i2c_add_adapter > - change return value on NACK and arb lost > (I think all the others should be okay as they are) > - fix 80 char warnings (involved s/reg_base/base) > - rebase on i2c/for-next > > Joachim Eastwood (2): > i2c: add i2c-lpc2k driver > doc: dt: add documentation for nxp,lpc1788-i2c Applied to for-next, thanks! Changes regarding readl_poll_timeout() can be sent incrementally.