From: Leo Yan <leo.yan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: YiPing Xu <xuyiping-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
Jassi Brar
<jassisinghbrar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Bintian Wang
<bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>,
haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
Wei Xu <xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
Jian Zhang <zhangjian001-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>,
Zhenwei Wang
<Zhenwei.wang-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>,
Haoju Mo <mohaoju-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>,
Dan Zhao <dan.zhao-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>,
kongfei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
Guangyue Zeng
<zengguangyue-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
Subject: Re: [PATCH v2 2/3] mailbox: Hi6220: add mailbox driver
Date: Thu, 20 Aug 2015 21:44:38 +0800 [thread overview]
Message-ID: <20150820134438.GA18629@leoy-linaro> (raw)
In-Reply-To: <55D568E2.9060505-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
Hi Yiping,
Thanks for review, please see below comments.
On Thu, Aug 20, 2015 at 01:42:58PM +0800, YiPing Xu wrote:
> On 2015/8/20 10:53, Leo Yan wrote:
> >Add driver for Hi6220 mailbox, the mailbox communicates with MCU; for
> >sending data, it can support two methods for low level implementation:
> >one is to use interrupt as acknowledge, another is automatic mode which
> >without any acknowledge. These two methods have been supported in the
> >driver. For receiving data, it will depend on the interrupt to notify
> >the channel has incoming message; enhance rx channel's message queue,
> >which is based on the code in drivers/mailbox/omap-mailbox.c.
> >
> >Now mailbox driver is used to send message to MCU to control dynamic
> >voltage and frequency scaling for CPU, GPU and DDR.
> >
> >Signed-off-by: Leo Yan <leo.yan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
[...]
> >+static int hi6220_mbox_send_data(struct mbox_chan *chan, void *msg)
> >+{
> >+ struct hi6220_mbox_chan *mchan = chan->con_priv;
> >+ struct hi6220_mbox *mbox = mchan->parent;
> >+ int irq = mchan->remote_irq;
> >+ u32 *buf = msg;
> >+ unsigned long flags;
> >+ int i;
> >+
> >+ hi6220_mbox_set_status(mchan, HI6220_MBOX_STATUS_TX);
>
> hi6220_mbox_set_status is called in send_data context, and it is
> also called in hi6220_mbox_rx_interrupt and
> hi6220_mbox_tx_interrupt.
>
> no race condition here?
Have thought this question yet when writing code; it will _NOT_
introduce race condition according to below implementation details:
- Every channel have its own slot, so there have no race condition
between channels;
- The channel is unidirectional; so it will be only for tx or rx at
the same time;
- The channel operation is sequential, so it have the sequence as:
For tx: startup -> send_data -> tx_irq (for ack);
For rx: startup -> rx_irq -> recv_data;
Thanks,
Leo Yan
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-08-20 13:44 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-20 2:53 [PATCH v2 0/3] mailbox: hisilicon: add Hi6220 mailbox driver Leo Yan
2015-08-20 2:53 ` [PATCH v2 1/3] dt-bindings: mailbox: Document " Leo Yan
2015-08-20 2:53 ` [PATCH v2 2/3] mailbox: Hi6220: add " Leo Yan
[not found] ` <1440039239-8772-3-git-send-email-leo.yan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-08-20 5:42 ` YiPing Xu
[not found] ` <55D568E2.9060505-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2015-08-20 13:44 ` Leo Yan [this message]
[not found] ` <1440039239-8772-1-git-send-email-leo.yan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-08-20 2:53 ` [PATCH v2 3/3] arm64: dts: add Hi6220 mailbox node Leo Yan
[not found] ` <1440039239-8772-4-git-send-email-leo.yan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-08-24 10:00 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150820134438.GA18629@leoy-linaro \
--to=leo.yan-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=Zhenwei.wang-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=dan.zhao-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=jassisinghbrar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=kongfei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mohaoju-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
--cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=xuyiping-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=zengguangyue-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=zhangjian001-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).