From: Varadarajan Narayanan <varada@codeaurora.org>
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
Andy Gross <agross@codeaurora.org>,
David Brown <davidb@codeaurora.org>,
Varadarajan Narayanan <varada@codeaurora.org>,
Stephen Boyd <sboyd@codeaurora.org>,
Lina Iyer <lina.iyer@linaro.org>,
Georgi Djakov <gdjakov@mm-sol.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-soc@vger.kernel.org
Cc: jaigan@codeaurora.org, snlakshm@codeaurora.org
Subject: [PATCH] qcom: ipq40xx: Add basic board/dts support for IPQ40XX SoC
Date: Fri, 21 Aug 2015 14:50:35 +0530 [thread overview]
Message-ID: <20150821092035.GA22319@codeaurora.org> (raw)
Add initial dts files and SoC support for IPQ40XX
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 246473a..6b4caee 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -477,7 +477,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
- qcom-msm8974-sony-xperia-honami.dtb
+ qcom-msm8974-sony-xperia-honami.dtb \
+ qcom-ipq40xx-r3pc.dtb
dtb-$(CONFIG_ARCH_REALVIEW) += \
arm-realview-pb1176.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
diff --git a/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts
new file mode 100644
index 0000000..7e4e629
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts
@@ -0,0 +1,33 @@
+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "qcom-ipq40xx.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ40XX R3PC";
+ compatible = "qcom,ipq40xx-r3pc", "qcom,ipq40xx";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512MB */
+ };
+
+ chosen {
+ bootargs = "root=/dev/ram rw init=/init console=ttyMSM0,115200n8 initrd=0x82000000,0x000E2246";
+ };
+
+ soc {
+ serial@78b0000 {
+ status = "ok";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-ipq40xx.dtsi b/arch/arm/boot/dts/qcom-ipq40xx.dtsi
new file mode 100644
index 0000000..f572f38
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq40xx.dtsi
@@ -0,0 +1,81 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ40XX";
+ compatible = "qcom,ipq40xx";
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x3>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0b000000 0x1000>,
+ <0x0b002000 0x1000>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 2 0xf08>,
+ <1 3 0xf08>,
+ <1 4 0xf08>,
+ <1 1 0xf08>;
+ clock-frequency = <20833333>;
+ };
+
+ serial@78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78b0000 0x200>;
+ interrupts = <0 108 0>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/configs/ipq_defconfig b/arch/arm/configs/ipq_defconfig
index 1cabd8b..054a159 100644
--- a/arch/arm/configs/ipq_defconfig
+++ b/arch/arm/configs/ipq_defconfig
@@ -22,6 +22,7 @@ CONFIG_ARCH_MSM8X60=y
CONFIG_ARCH_MSM8960=y
CONFIG_ARCH_MSM8974=y
CONFIG_ARCH_IPQ8064=y
+CONFIG_ARCH_IPQ40XX=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index fab49a2..3add9f9 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -26,4 +26,8 @@ config ARCH_IPQ8064
bool "Enable support for IPQ806x"
select CLKSRC_QCOM
+config ARCH_IPQ40XX
+ bool "Enable support for IPQ40XX"
+ select HAVE_ARM_ARCH_TIMER
+
endif
diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
index 6d8bbf7..566487d 100644
--- a/arch/arm/mach-qcom/board.c
+++ b/arch/arm/mach-qcom/board.c
@@ -22,6 +22,7 @@ static const char * const qcom_dt_match[] __initconst = {
"qcom,ipq8064",
"qcom,msm8660-surf",
"qcom,msm8960-cdp",
+ "qcom,ipq40xx-r3pc",
NULL
};
next reply other threads:[~2015-08-21 9:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-21 9:20 Varadarajan Narayanan [this message]
2015-08-21 10:31 ` [PATCH] qcom: ipq40xx: Add basic board/dts support for IPQ40XX SoC Varadarajan Narayanan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150821092035.GA22319@codeaurora.org \
--to=varada@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=davidb@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=gdjakov@mm-sol.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jaigan@codeaurora.org \
--cc=lina.iyer@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=snlakshm@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).