From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: Re: [PATCH v5 3/3] ARM: bcm2835: Add DT for the firmware clocks driver. Date: Thu, 27 Aug 2015 11:48:54 +0100 Message-ID: <20150827104854.GA4796@x1> References: <1439507142-2965-1-git-send-email-eric@anholt.net> <1439507142-2965-4-git-send-email-eric@anholt.net> <55CEBC6B.9070001@wwwdotorg.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <55CEBC6B.9070001@wwwdotorg.org> Sender: linux-kernel-owner@vger.kernel.org To: Stephen Warren Cc: Eric Anholt , linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rpi-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Stephen Boyd , Mike Turquette , devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org On Fri, 14 Aug 2015, Stephen Warren wrote: > On 08/13/2015 05:05 PM, Eric Anholt wrote: > > Signed-off-by: Eric Anholt > > Acked-by: Lee Jones > > A patch description might be nice, although admittedly the subject seems > clear enough. Agreed that the subject is clear enough on this occasion. > > diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi > > > + firmware_clocks: firmware-clocks { > > + compatible = "raspberrypi,bcm2835-firmware-clocks"; > > + #clock-cells = <1>; > > + raspberrypi,firmware = <&firmware>; > > + }; > > No need to resend for this, but just a background note: DT node names > usually contain a device type not a device identity, so "clocks" not > "firmware-clocks" would be typical. Please fix this up when you re-send the set. > This patch, > Acked-by: Stephen Warren