devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Chen <peter.chen@freescale.com>
To: Nathan Sullivan <nathan.sullivan@ni.com>
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	gregkh@linuxfoundation.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: Re: [PATCH 1/2] usb: chipidea: add xilinx zynq platform data
Date: Mon, 31 Aug 2015 10:36:06 +0800	[thread overview]
Message-ID: <20150831023605.GD25516@shlinux2> (raw)
In-Reply-To: <1440602865-30468-1-git-send-email-nathan.sullivan@ni.com>

On Wed, Aug 26, 2015 at 10:27:44AM -0500, Nathan Sullivan wrote:
> The Xilinx Zynq udc does not need the CI_HDRC_DISABLE_STREAMING flag,
> unlike the default platform data.  Add platform data specific to the
> Zynq udc.
> 

You may add the possible reason, eg, tx buffer is not enough.

Others are ok.

> Based on a patch by the same name from the Xilinx vendor tree.
> 
> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
> ---
>  drivers/usb/chipidea/ci_hdrc_usb2.c |   25 +++++++++++++++++++------
>  1 file changed, 19 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
> index 9eae1a1..4456d2c 100644
> --- a/drivers/usb/chipidea/ci_hdrc_usb2.c
> +++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
> @@ -12,6 +12,7 @@
>  #include <linux/dma-mapping.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> +#include <linux/of_platform.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
>  #include <linux/usb/chipidea.h>
> @@ -30,18 +31,36 @@ static const struct ci_hdrc_platform_data ci_default_pdata = {
>  	.flags		= CI_HDRC_DISABLE_STREAMING,
>  };
>  
> +static struct ci_hdrc_platform_data ci_zynq_pdata = {
> +	.capoffset	= DEF_CAPOFFSET,
> +};
> +
> +static const struct of_device_id ci_hdrc_usb2_of_match[] = {
> +	{ .compatible = "chipidea,usb2"},
> +	{ .compatible = "xlnx,zynq-usb-2.20a", .data = &ci_zynq_pdata},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
> +
>  static int ci_hdrc_usb2_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
>  	struct ci_hdrc_usb2_priv *priv;
>  	struct ci_hdrc_platform_data *ci_pdata = dev_get_platdata(dev);
>  	int ret;
> +	const struct of_device_id *match;
>  
>  	if (!ci_pdata) {
>  		ci_pdata = devm_kmalloc(dev, sizeof(*ci_pdata), GFP_KERNEL);
>  		*ci_pdata = ci_default_pdata;	/* struct copy */
>  	}
>  
> +	match = of_match_device(ci_hdrc_usb2_of_match, &pdev->dev);
> +	if (match && match->data) {
> +		/* struct copy */
> +		*ci_pdata = *(struct ci_hdrc_platform_data *)match->data;
> +	}
> +
>  	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>  	if (!priv)
>  		return -ENOMEM;
> @@ -96,12 +115,6 @@ static int ci_hdrc_usb2_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> -static const struct of_device_id ci_hdrc_usb2_of_match[] = {
> -	{ .compatible = "chipidea,usb2" },
> -	{ }
> -};
> -MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
> -
>  static struct platform_driver ci_hdrc_usb2_driver = {
>  	.probe	= ci_hdrc_usb2_probe,
>  	.remove	= ci_hdrc_usb2_remove,
> -- 
> 1.7.10.4
> 

-- 

Best Regards,
Peter Chen

      parent reply	other threads:[~2015-08-31  2:36 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-26 15:27 [PATCH 1/2] usb: chipidea: add xilinx zynq platform data Nathan Sullivan
2015-08-26 15:27 ` [PATCH 2/2] Documentation: bindings: add doc for zynq USB Nathan Sullivan
     [not found] ` <1440602865-30468-1-git-send-email-nathan.sullivan-acOepvfBmUk@public.gmane.org>
2015-08-27  5:29   ` [PATCH 1/2] usb: chipidea: add xilinx zynq platform data sundeep subbaraya
     [not found]     ` <CALHRZuqFtaRFNd9D=a+x2rZ2848ZOGYbTkSWCHxNPcW_NvocxA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-08-27  4:33       ` Peter Chen
2015-08-27  7:41         ` punnaiah choudary kalluri
     [not found]           ` <CAGnW=BYMnOFTaMQJtLXZ9ckCEHs+gCOCQR0VQFfO4HP=SMHBDQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-08-27 14:33             ` Nathan Sullivan
2015-08-28  1:30               ` Peter Chen
2015-08-28 14:42                 ` Nathan Sullivan
2015-08-31  0:40                   ` Peter Chen
2015-08-31  3:31                     ` punnaiah choudary kalluri
2015-08-31  2:28                       ` Peter Chen
2015-09-01  6:51                         ` Subbaraya Sundeep Bhatta
2015-09-23  6:58                         ` Subbaraya Sundeep Bhatta
2015-09-23  7:01                         ` Subbaraya Sundeep Bhatta
2015-08-31  2:36 ` Peter Chen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150831023605.GD25516@shlinux2 \
    --to=peter.chen@freescale.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=nathan.sullivan@ni.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).