From mboxrd@z Thu Jan 1 00:00:00 1970 From: Laurentiu Palcu Subject: Re: [PATCH v2 04/13] power: bq24257: Add SW-based approach for Power Good determination Date: Thu, 10 Sep 2015 15:57:45 +0300 Message-ID: <20150910125745.GF21512@lpalcu-desk> References: <1441757557-7266-1-git-send-email-dannenberg@ti.com> <1441757557-7266-5-git-send-email-dannenberg@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1441757557-7266-5-git-send-email-dannenberg-l0cyMroinI0@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Andreas Dannenberg Cc: Sebastian Reichel , Dmitry Eremin-Solenikov , David Woodhouse , Krzysztof Kozlowski , linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On Tue, Sep 08, 2015 at 07:12:28PM -0500, Andreas Dannenberg wrote: > A software-based approach for determining the charger's input voltage > "Power Good" state is introduced for devices like the bq24250 which > don't have a dedicated hardware pin for that purpose. This SW-based > approach is also used for other devices (with dedicated PG pin) as a > fall back solution if that pin is not configured to be used through > "pg-gpios". > > Signed-off-by: Andreas Dannenberg Reviewed-by: Laurentiu Palcu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html