From: "Sören Brinkmann" <soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
To: Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Michal Simek
<michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH 2/2] Documentation: bindings: add description of phy for sdhci-of-arasan
Date: Sun, 13 Sep 2015 19:47:02 -0700 [thread overview]
Message-ID: <20150914024702.GA19678@xsjsorenbubuntu> (raw)
In-Reply-To: <1441961729-10594-1-git-send-email-shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Hi Shawn,
On Fri, 2015-09-11 at 04:55PM +0800, Shawn Lin wrote:
> This patch adds phys and phy-names for sdhci-of-arasan as optional
> properties, and details the example as well.
>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> ---
>
> Documentation/devicetree/bindings/mmc/arasan,sdhci.txt | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> index da541c3..0264d5f 100644
> --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> @@ -1,11 +1,12 @@
> Device Tree Bindings for the Arasan SDHCI Controller
>
> - The bindings follow the mmc[1], clock[2] and interrupt[3] bindings. Only
> - deviations are documented here.
> + The bindings follow the mmc[1], clock[2], interrupt[3] and phy[4] bindings.
> + Only deviations are documented here.
>
> [1] Documentation/devicetree/bindings/mmc/mmc.txt
> [2] Documentation/devicetree/bindings/clock/clock-bindings.txt
> [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> + [4] Documentation/devicetree/bindings/phy/phy-bindings.txt
>
> Required Properties:
> - compatible: Compatibility string. Must be 'arasan,sdhci-8.9a' or
> @@ -16,6 +17,9 @@ Required Properties:
> - interrupts: Interrupt specifier
> - interrupt-parent: Phandle for the interrupt controller that services
> interrupts for this device.
> +Optional Properties:
> + - phys: From PHY bindings: Phandle for the Generic PHY for arasan.
> + - phy-names: MUST be "phy_arasan".
This might be a dumb question, but, is the external phy actually
optional? Or is it mandatory for certain implementations of the IP.
In the latter case, it should probably be a mandatory property depending
on the compatible string matching an implementation that requires an
external phy (accordingly, the implementation might have to treat it
that way too).
Sören
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2015-09-14 2:47 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-11 8:54 [PATCH 1/2] mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan Shawn Lin
2015-09-11 8:55 ` [PATCH 2/2] Documentation: bindings: add description of phy " Shawn Lin
[not found] ` <1441961729-10594-1-git-send-email-shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-09-14 2:47 ` Sören Brinkmann [this message]
2015-09-14 3:02 ` Shawn Lin
2015-10-16 12:35 ` [PATCH 1/2] mmc: sdhci-of-arasan: add phy support " Ulf Hansson
[not found] ` <CAPDyKFpwgZSkE+TNehZ1Un=5CfjoEtfvELfrS6t-ZHZPscy3Yg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-10-19 0:51 ` Shawn Lin
[not found] ` <56243E85.2040202-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-10-19 7:50 ` Ulf Hansson
2015-10-19 8:39 ` Shawn Lin
[not found] ` <5624AC51.9060907-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-10-19 10:54 ` Ulf Hansson
2015-10-19 14:56 ` Shawn Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150914024702.GA19678@xsjsorenbubuntu \
--to=soren.brinkmann-gjffaj9ahvfqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
--cc=shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).