From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH v2 1/4] ARM: dts: dra7: Add dt node for the sycon pcie Date: Mon, 12 Oct 2015 14:21:49 -0700 Message-ID: <20151012212149.GZ23801@atomide.com> References: <1442323985-29939-1-git-send-email-kishon@ti.com> <1442323985-29939-2-git-send-email-kishon@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1442323985-29939-2-git-send-email-kishon@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: Kishon Vijay Abraham I Cc: linux-kernel@vger.kernel.org, bcousson@baylibre.com, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, nsekhar@ti.com, linux@arm.linux.org.uk List-Id: devicetree@vger.kernel.org * Kishon Vijay Abraham I [150915 06:37]: > Add new device tree node for the control module register space where > PCIe registers are present. > > Signed-off-by: Kishon Vijay Abraham I > --- > arch/arm/boot/dts/dra7.dtsi | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi > index 5d65db9..0769b5d 100644 > --- a/arch/arm/boot/dts/dra7.dtsi > +++ b/arch/arm/boot/dts/dra7.dtsi > @@ -154,6 +154,11 @@ > compatible = "syscon"; > reg = <0x1c04 0x0020>; > }; > + > + scm_conf_pcie: tisyscon@1c24 { > + compatible = "syscon"; > + reg = <0x1c24 0x0024>; > + }; > }; > > cm_core_aon: cm_core_aon@5000 { Why don't you just extend the existing scm_conf1 area? This is not all pcie specific for scm_conf_pcie, at least for PLLEN_CONTROL, RMII_CLK_SETTING and MUXSEL_32K_CLKIN. Regards, Tony