From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: Re: [PATCH v2 2/3] mfd: dt-bindings: Document pulled down WRSTBI pin on S2MPS1X Date: Tue, 13 Oct 2015 10:04:31 +0100 Message-ID: <20151013090431.GI32409@x1> References: <1444178681-16188-1-git-send-email-k.kozlowski@samsung.com> <1444178681-16188-2-git-send-email-k.kozlowski@samsung.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: <1444178681-16188-2-git-send-email-k.kozlowski@samsung.com> Sender: linux-kernel-owner@vger.kernel.org To: Krzysztof Kozlowski Cc: Sangbeom Kim , linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org, Bartlomiej Zolnierkiewicz , Marek Szyprowski , Chanwoo Choi , Inki Dae List-Id: devicetree@vger.kernel.org On Wed, 07 Oct 2015, Krzysztof Kozlowski wrote: > Document a new Device Tree property 'samsung,s2mps11-wrstbi-ground' > indicating that WRSTBI pin of S2MPS13 PMIC is pulled down so > corresponding buck warm reset function should be disabled. >=20 > Signed-off-by: Krzysztof Kozlowski >=20 > --- >=20 > Changs since v1: > None. > --- > Documentation/devicetree/bindings/mfd/s2mps11.txt | 3 +++ > 1 file changed, 3 insertions(+) Applied, thanks. > diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Docu= mentation/devicetree/bindings/mfd/s2mps11.txt > index 90eaef393325..890f0b0e1643 100644 > --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt > +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt > @@ -19,6 +19,9 @@ Optional properties: > connected to the ground so the PMIC must manually set PWRHOLD bit = in CTRL1 > register to turn off the power. Usually the ACOKB is pulled up to = VBATT so > when PWRHOLD pin goes low, the rising ACOKB will trigger power off= =2E > +- samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC i= s pulled > + down. When the system is suspended it will always go down thus tri= ggerring > + unwanted buck warm reset (setting buck voltages to default values)= =2E > =20 > Optional nodes: > - clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffe= red 32.768 --=20 Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org =E2=94=82 Open source software for ARM SoCs =46ollow Linaro: Facebook | Twitter | Blog