Re: [PATCH v7 5/6] mfd: da9150: Use relative paths in DT bindings document

[Lee Jones <lee.jones@linaro.org>]

On Wed, 07 Oct 2015, Adam Thomson wrote:

> When referencing other DT bindings documentation, use relative
> path rather than absolute.
> 
> Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
> Suggested-by: Lee Jones <lee.jones@linaro.org>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> ---
> 
> Changes in v6:
>  - Rebase to v4.3-rc4
> 
> Changes in v5:
>  - Rebase to v4.2
> 
> Changes in v3:
>  - Initial version.
> 
> 
>  Documentation/devicetree/bindings/mfd/da9150.txt | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/da9150.txt b/Documentation/devicetree/bindings/mfd/da9150.txt
> index 970801d..fd4dca7 100644
> --- a/Documentation/devicetree/bindings/mfd/da9150.txt
> +++ b/Documentation/devicetree/bindings/mfd/da9150.txt
> @@ -17,13 +17,13 @@ Required properties:
>    the IRQs from da9150 are delivered to.
>  - interrupts: IRQ line info for da9150 chip.
>  - interrupt-controller: da9150 has internal IRQs (own IRQ domain).
> -  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
> +  (See ../interrupt-controller/interrupts.txt for
>     further information relating to interrupt properties)
> 
>  Sub-devices:
> -- da9150-gpadc: See Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt
> -- da9150-charger: See Documentation/devicetree/bindings/power/da9150-charger.txt
> -- da9150-fg: See Documentation/devicetree/bindings/power/da9150-fg.txt
> +- da9150-gpadc: See ../iio/adc/da9150-gpadc.txt
> +- da9150-charger: See ../power/da9150-charger.txt
> +- da9150-fg: See ../power/da9150-fg.txt
> 
>  Example:
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog