From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: Re: [PATCH v3 3/4] mfd: arizona: Remove bindings covered in new subsystem specific docs Date: Wed, 28 Oct 2015 09:03:06 +0000 Message-ID: <20151028090306.GJ5828@x1> References: <1445961719-1020-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> <1445961719-1020-3-git-send-email-ckeepax@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: <1445961719-1020-3-git-send-email-ckeepax@opensource.wolfsonmicro.com> Sender: linux-kernel-owner@vger.kernel.org To: Charles Keepax Cc: broonie@kernel.org, cw00.choi@samsung.com, myungjoo.ham@samsung.com, lgirdwood@gmail.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, patches@opensource.wolfsonmicro.com List-Id: devicetree@vger.kernel.org On Tue, 27 Oct 2015, Charles Keepax wrote: > Binding documentation has been added in new subsystem specific bindin= g > documents. This patch removes the now duplicate documentation from th= e > MFD documentation. >=20 > Signed-off-by: Charles Keepax > --- >=20 > Changes since v2: > - No longer moving the core regulators into the regulator binding do= cument, > as they are properties of the device as a whole not just the regul= ators > - Moved the maintainer updates into a seperate patch >=20 > Lee, I have removed your ack because the patch has changed a fair amo= unt. > Apologies if this would not have been your preference. That was the right thing to do. > Thanks, > Charles >=20 > Documentation/devicetree/bindings/mfd/arizona.txt | 15 +++--------= ---- > 1 files changed, 3 insertions(+), 12 deletions(-) Applied, thanks. > diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Docu= mentation/devicetree/bindings/mfd/arizona.txt > index a8fee60..18be0cb 100644 > --- a/Documentation/devicetree/bindings/mfd/arizona.txt > +++ b/Documentation/devicetree/bindings/mfd/arizona.txt > @@ -44,7 +44,6 @@ Required properties: > Optional properties: > =20 > - wlf,reset : GPIO specifier for the GPIO controlling /RESET > - - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA > =20 > - wlf,gpio-defaults : A list of GPIO configuration register values= =2E Defines > for the appropriate values can found in . If > @@ -67,21 +66,13 @@ Optional properties: > present, the number of values should be less than or equal to th= e > number of inputs, unspecified inputs will use the chip default. > =20 > - - wlf,hpdet-channel : Headphone detection channel. > - ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to H= PDETL > - ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to H= PDETR > - If this node is not mentioned or if the value is unknown, then > - headphone detection mode is set to HPDETL. > - > - DCVDD-supply, MICVDD-supply : Power supplies, only need to be sp= ecified if > they are being externally supplied. As covered in > Documentation/devicetree/bindings/regulator/regulator.txt > =20 > -Optional subnodes: > - - ldo1 : Initial data for the LDO1 regulator, as covered in > - Documentation/devicetree/bindings/regulator/regulator.txt > - - micvdd : Initial data for the MICVDD regulator, as covered in > - Documentation/devicetree/bindings/regulator/regulator.txt > +Also see child specific device properties: > + Regulator - ../regulator/arizona-regulator.txt > + Extcon - ../extcon/extcon-arizona.txt > =20 > Example: > =20 --=20 Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org =E2=94=82 Open source software for ARM SoCs =46ollow Linaro: Facebook | Twitter | Blog