Re: [PATCH v4 1/3] Documentation: dt-bindings: add async_irq to msm_hsusb

[Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

On Fri, Nov 20, 2015 at 03:47:18PM -0800, Tim Bird wrote:
> Add optional async_irq to msm_hsusb binding doc.
> 
> Signed-off-by: Tim Bird <tim.bird-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

> ---
>  Documentation/devicetree/bindings/usb/msm-hsusb.txt | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> index 8654a3e..2d13c1c 100644
> --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> @@ -23,7 +23,12 @@ Required properties:
>    "qcom,usb-otg-snps" for chipsets with Synopsys 28nm PHY
>  
>  - regs:         Offset and length of the register set in the memory map
> -- interrupts:   interrupt-specifier for the OTG interrupt.
> +- interrupts:   interrupt-specifier for the OTG interrupts
> +
> +- interrupt-names: Should contain the following:
> +  "core"        USB core interrupt
> +  "async"       Asynchronous interrupt to wake up from low power mode
> +                (optional)
>  
>  - clocks:       A list of phandle + clock-specifier pairs for the
>                  clocks listed in clock-names
> @@ -89,7 +94,8 @@ Example HSUSB OTG controller device node:
>      usb@f9a55000 {
>          compatible = "qcom,usb-otg-snps";
>          reg = <0xf9a55000 0x400>;
> -        interrupts = <0 134 0>;
> +        interrupts = <0 134 0>, <0 140 0>;
> +        interrupt-names = "core", "async";
>          dr_mode = "peripheral";
>  
>          clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>,
> -- 
> 1.8.2.2
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html