Re: [PATCH] ARM: dts: sun8i-h3-orangepi-plus: Enable USB host controllers

[Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1426 bytes --]

Hi, 

On Fri, Nov 20, 2015 at 03:38:47PM +0100, Hans de Goede wrote:
> Hi,
> 
> On 17-11-15 17:12, Jens Kuske wrote:
> >Enable the 2 USB host controllers used on the Orange Pi Plus
> >and add the necessary regulators.
> >
> >Signed-off-by: Reinder de Haan <patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org>
> >Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> >Signed-off-by: Jens Kuske <jenskuske-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> >---
> >
> >Hi Hans,
> >
> >with these regulators USB works on the Orange Pi Plus too.
> >I don't know if adding the regulators in the dts is okay, since most
> >regulators are defined in the sunxi-common-regulators.dtsi, but
> >we use different pins.
> 
> Thanks, I've added this to my sunxi-wip branch for now.
> 
> Regards,
> 
> Hans
> 
> p.s.
> 
> Any progress on getting the "core" H3 kernel support upstream ?
> 
> Given Arnd's remarks about how we should not hard-code the
> indices in the clk driver + the very KISS nature of the
> change to 1 parent-clk per gate setup I still believe
> that that one is best.
> 
> Maxime ? Chen-Yu ? It would be really good to be able to
> move forward with this, how do you want to proceed ?

Yeah, sorry, Chen-Yu and I were busy because of $LIFE the past weeks,
we're getting back to speed.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com