From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Boyd Subject: Re: arm64: dts: qcom: Add apq8096 dragonboard dts skeletons Date: Mon, 30 Nov 2015 15:48:17 -0800 Message-ID: <20151130234817.GC21446@codeaurora.org> References: <1448517238-32338-1-git-send-email-rnayak@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1448517238-32338-1-git-send-email-rnayak@codeaurora.org> Sender: linux-arm-msm-owner@vger.kernel.org To: Rajendra Nayak Cc: agross@codeaurora.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org On 11/26, Rajendra Nayak wrote: > Add new dtsi and dts files for the apq8096 dragonboards with just > a serial device used as debug console > > Signed-off-by: Rajendra Nayak > --- > Patch applies on top of Stephens' patches to add msm8996 dtsi > https://lkml.org/lkml/2015/11/17/955 > > arch/arm64/boot/dts/qcom/Makefile | 2 +- > arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts | 21 ++++++++++++++++ > arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi | 30 +++++++++++++++++++++++ > 3 files changed, 52 insertions(+), 1 deletion(-) > create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts > create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index fa1f661..bd992ef 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -1,5 +1,5 @@ > dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb msm8916-mtp.dtb > -dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb > +dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb apq8096-dragonboard.dtb We should move to one dtb per line in this file. Other platforms are doing the same thing. -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project