From: Lorenzo Pieralisi <lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org>
To: Jisheng Zhang <jszhang-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
Cc: sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
catalin.marinas-5wv7dgnIgG8@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH] arm64: dts: berlin4ct: support cpuidle-dt
Date: Wed, 2 Dec 2015 10:31:59 +0000 [thread overview]
Message-ID: <20151202103159.GC18657@red-moon> (raw)
In-Reply-To: <1448890918-6999-1-git-send-email-jszhang-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
On Mon, Nov 30, 2015 at 09:41:58PM +0800, Jisheng Zhang wrote:
> This patch adds an idle-states node to describe the berlin4ct idle
> states and also adds references to the idle-states node in all CPU
> nodes. After this patch cpuidle is enabled.
>
> Signed-off-by: Jisheng Zhang <jszhang-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
> ---
> arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org>
>
> diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> index 39d0676..3649cea 100644
> --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> @@ -69,6 +69,7 @@
> device_type = "cpu";
> reg = <0x0>;
> enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> };
>
> cpu1: cpu@1 {
> @@ -76,6 +77,7 @@
> device_type = "cpu";
> reg = <0x1>;
> enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> };
>
> cpu2: cpu@2 {
> @@ -83,6 +85,7 @@
> device_type = "cpu";
> reg = <0x2>;
> enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> };
>
> cpu3: cpu@3 {
> @@ -90,6 +93,19 @@
> device_type = "cpu";
> reg = <0x3>;
> enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> + };
> +
> + idle-states {
> + entry-method = "psci";
> + CPU_SLEEP_0: cpu-sleep-0 {
> + compatible = "arm,idle-state";
> + local-timer-stop;
> + arm,psci-suspend-param = <0x0010000>;
> + entry-latency-us = <75>;
> + exit-latency-us = <155>;
> + min-residency-us = <1000>;
> + };
> };
> };
>
> --
> 2.6.2
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-12-02 10:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-30 13:41 [PATCH] arm64: dts: berlin4ct: support cpuidle-dt Jisheng Zhang
[not found] ` <1448890918-6999-1-git-send-email-jszhang-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
2015-12-02 10:31 ` Lorenzo Pieralisi [this message]
2015-12-06 9:27 ` Sebastian Hesselbarth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151202103159.GC18657@red-moon \
--to=lorenzo.pieralisi-5wv7dgnigg8@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=jszhang-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox