From: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
To: Grygorii Strashko <grygorii.strashko-l0cyMroinI0@public.gmane.org>
Cc: t-kristo-l0cyMroinI0@public.gmane.org,
nsekhar-l0cyMroinI0@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Subject: Re: [4.4-rc][PATCH v2] ARM: dts: am4372: fix clock source for arm twd and global timers
Date: Thu, 3 Dec 2015 08:35:51 -0800 [thread overview]
Message-ID: <20151203163551.GQ23396@atomide.com> (raw)
In-Reply-To: <1448898998-32749-1-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
* Grygorii Strashko <grygorii.strashko-l0cyMroinI0@public.gmane.org> [151130 07:58]:
> ARM TWD and Global timer are clocked by PERIPHCLK which is MPU_CLK/2.
> But now they are clocked by dpll_mpu_m2_ck == MPU_CLK and, as result.
> Timekeeping core misbehaves. For example, execution of command
> "sleep 5" will take 10 sec instead of 5.
>
> Hence, fix it by adding mpu_periphclk ("fixed-factor-clock") and use
> it for clocking ARM TWD and Global timer (same way as on OMAP4).
>
> Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> Cc: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
> Cc: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
> Fixes:commit 8cbd4c2f6a99 ("arm: boot: dts: am4372: add ARM timers and SCU nodes")
> Signed-off-by: Grygorii Strashko <grygorii.strashko-l0cyMroinI0@public.gmane.org>
Is this fix alone enough or do you still need to disable other the ARM
timers in the board specific dts file?
Regards,
Tony
> ---
> Changes in v2:
> - fix: mpu_periphclk should be clocked from dpll_mpu_m2_ck instead of
> dpll_mpu_ck.
> link on v1:
> http://www.spinics.net/lists/arm-kernel/msg463898.html
>
> arch/arm/boot/dts/am4372.dtsi | 4 ++--
> arch/arm/boot/dts/am43xx-clocks.dtsi | 8 ++++++++
> 2 files changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
> index d83ff9c..de8791a 100644
> --- a/arch/arm/boot/dts/am4372.dtsi
> +++ b/arch/arm/boot/dts/am4372.dtsi
> @@ -74,7 +74,7 @@
> reg = <0x48240200 0x100>;
> interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-parent = <&gic>;
> - clocks = <&dpll_mpu_m2_ck>;
> + clocks = <&mpu_periphclk>;
> };
>
> local_timer: timer@48240600 {
> @@ -82,7 +82,7 @@
> reg = <0x48240600 0x100>;
> interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-parent = <&gic>;
> - clocks = <&dpll_mpu_m2_ck>;
> + clocks = <&mpu_periphclk>;
> };
>
> l2-cache-controller@48242000 {
> diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
> index cc88728..a38af2b 100644
> --- a/arch/arm/boot/dts/am43xx-clocks.dtsi
> +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
> @@ -259,6 +259,14 @@
> ti,invert-autoidle-bit;
> };
>
> + mpu_periphclk: mpu_periphclk {
> + #clock-cells = <0>;
> + compatible = "fixed-factor-clock";
> + clocks = <&dpll_mpu_m2_ck>;
> + clock-mult = <1>;
> + clock-div = <2>;
> + };
> +
> dpll_ddr_ck: dpll_ddr_ck {
> #clock-cells = <0>;
> compatible = "ti,am3-dpll-clock";
> --
> 2.6.3
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-12-03 16:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-30 15:56 [4.4-rc][PATCH v2] ARM: dts: am4372: fix clock source for arm twd and global timers Grygorii Strashko
[not found] ` <1448898998-32749-1-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
2015-12-03 16:35 ` Tony Lindgren [this message]
[not found] ` <20151203163551.GQ23396-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2015-12-03 18:04 ` Grygorii Strashko
[not found] ` <5660843E.3000801-l0cyMroinI0@public.gmane.org>
2015-12-08 17:41 ` Grygorii Strashko
2015-12-08 18:03 ` Felipe Balbi
[not found] ` <87wpsolsvo.fsf-HgARHv6XitJaoMGHk7MhZQC/G2K4zDHf@public.gmane.org>
2015-12-10 0:47 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151203163551.GQ23396@atomide.com \
--to=tony-4v6ys6ai5vpbdgjk7y7tuq@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=grygorii.strashko-l0cyMroinI0@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=nsekhar-l0cyMroinI0@public.gmane.org \
--cc=t-kristo-l0cyMroinI0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).