Re: [PATCH v3 12/12] dt-bindings: msm/dsi: Add DSIv2 documentation

[Rob Herring <robh@kernel.org>]

On Tue, Dec 01, 2015 at 03:30:10PM +0530, Archit Taneja wrote:
> Add additional property info needed for DSIv2 DT.
> 
> Cc: devicetree@vger.kernel.org
> Cc: Rob Herring <robh@kernel.org>
> 
> Signed-off-by: Archit Taneja <architt@codeaurora.org>

Acked-by: Rob Herring <robh@kernel.org>

> ---
>  Documentation/devicetree/bindings/display/msm/dsi.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
> index e097955..e7423be 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
> @@ -21,10 +21,13 @@ Required properties:
>    * "byte_clk"
>    * "pixel_clk"
>    * "core_clk"
> +  For DSIv2, we need an additional clock:
> +   * "src_clk"
>  - vdd-supply: phandle to vdd regulator device node
>  - vddio-supply: phandle to vdd-io regulator device node
>  - vdda-supply: phandle to vdda regulator device node
>  - qcom,dsi-phy: phandle to DSI PHY device node
> +- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
>  
>  Optional properties:
>  - panel@0: Node of panel connected to this DSI controller.
> @@ -51,6 +54,7 @@ Required properties:
>    * "qcom,dsi-phy-28nm-hpm"
>    * "qcom,dsi-phy-28nm-lp"
>    * "qcom,dsi-phy-20nm"
> +  * "qcom,dsi-phy-28nm-8960"
>  - reg: Physical base address and length of the registers of PLL, PHY and PHY
>    regulator
>  - reg-names: The names of register regions. The following regions are required:
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel