From mboxrd@z Thu Jan  1 00:00:00 1970
From: Rob Herring <robh@kernel.org>
Subject: Re: [PATCH v2 2/5] dt-bindings: clock: add description of LPC32xx
 USB clock controller
Date: Mon, 7 Dec 2015 08:39:58 -0600
Message-ID: <20151207143958.GA6143@rob-hp-laptop>
References: <1449398757-16834-1-git-send-email-vz@mleia.com>
 <1449398757-16834-3-git-send-email-vz@mleia.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-clk-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <1449398757-16834-3-git-send-email-vz@mleia.com>
Sender: linux-clk-owner@vger.kernel.org
To: Vladimir Zapolskiy <vz@mleia.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>, Michael Turquette <mturquette@baylibre.com>, Arnd Bergmann <arnd@arndb.de>, Russell King <linux@arm.linux.org.uk>, Roland Stigge <stigge@antcom.de>, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
List-Id: devicetree@vger.kernel.org

On Sun, Dec 06, 2015 at 12:45:54PM +0200, Vladimir Zapolskiy wrote:
> NXP LPC32xx USB controller has a subdevice, which controls USB AHB
> slave, USB OTG, USB OHCI, USB device and I2C controller to USB phy
> clocks, this change adds description of the clock controller, for more
> details reference LPC32xx User's Manual, namely USB control, OTG clock
> control and OTG clock status registers.
> 
> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
> ---
> Changes from v1 to v2:
> - use lowercase hex numbers in a DT binding example

Acked-by: Rob Herring <robh@kernel.org>

> 
>  .../bindings/clock/nxp,lpc3220-usb-clk.txt         | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt b/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt
> new file mode 100644
> index 0000000..0aa2494
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt
> @@ -0,0 +1,22 @@
> +NXP LPC32xx USB Clock Controller
> +
> +Required properties:
> +- compatible: should be "nxp,lpc3220-usb-clk"
> +- reg:  should contain clock controller registers location and length
> +- #clock-cells: must be 1, the cell holds id of a clock provided by the
> +  USB clock controller
> +
> +Examples:
> +
> +	usb {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "simple-bus";
> +		ranges = <0x0 0x31020000 0x00001000>;
> +
> +		usbclk: clock-controller@f00 {
> +			compatible = "nxp,lpc3220-usb-clk";
> +			reg = <0xf00 0x100>;
> +			#clock-cells = <1>;
> +		};
> +	};
> -- 
> 2.1.4
>