From: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Yuantian.Tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v3] ARM: dts: ls1021a: add sata node to dts
Date: Fri, 11 Dec 2015 22:41:19 +0800 [thread overview]
Message-ID: <20151211144119.GM11252@tiger> (raw)
In-Reply-To: <1449040591-13618-1-git-send-email-Yuantian.Tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
On Wed, Dec 02, 2015 at 03:16:31PM +0800, Yuantian.Tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org wrote:
> From: Tang Yuantian <Yuantian.Tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
>
> Added sata node to ls1021aqds and ls1021atwr board to support
> sata function.
>
> Signed-off-by: Tang Yuantian <Yuantian.Tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
> v3:
> - refine the title and commit message
> - added a status property so that sata can be controlled
> by board specific dts.
> v2:
> - put reg-names right after reg property
>
> arch/arm/boot/dts/ls1021a-qds.dts | 4 ++++
> arch/arm/boot/dts/ls1021a-twr.dts | 4 ++++
> arch/arm/boot/dts/ls1021a.dtsi | 11 +++++++++++
> 3 files changed, 19 insertions(+)
>
> diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
> index 0521e68..803cc54 100644
> --- a/arch/arm/boot/dts/ls1021a-qds.dts
> +++ b/arch/arm/boot/dts/ls1021a-qds.dts
> @@ -327,3 +327,7 @@
> &uart1 {
> status = "okay";
> };
> +
> +&sata {
> + status = "okay";
> +};
The labelled nodes are sorted alphabetically. Please keep the new
addition sorted too.
> diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
> index fbb89d1..62dec7c 100644
> --- a/arch/arm/boot/dts/ls1021a-twr.dts
> +++ b/arch/arm/boot/dts/ls1021a-twr.dts
> @@ -219,3 +219,7 @@
> &uart1 {
> status = "okay";
> };
> +
> +&sata {
> + status = "okay";
> +};
Ditto
Shawn
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index 9430a99..da9bd7e 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -143,6 +143,17 @@
> status = "disabled";
> };
>
> + sata: sata@3200000 {
> + compatible = "fsl,ls1021a-ahci";
> + reg = <0x0 0x3200000 0x0 0x10000>,
> + <0x0 0x20220520 0x0 0x4>;
> + reg-names = "ahci", "sata-ecc";
> + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&platform_clk 1>;
> + dma-coherent;
> + status = "disabled";
> + };
> +
> scfg: scfg@1570000 {
> compatible = "fsl,ls1021a-scfg", "syscon";
> reg = <0x0 0x1570000 0x0 0x10000>;
> --
> 2.1.0.27.g96db324
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2015-12-11 14:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-02 7:16 [PATCH v3] ARM: dts: ls1021a: add sata node to dts Yuantian.Tang-KZfg59tc24xl57MIdRCFDg
[not found] ` <1449040591-13618-1-git-send-email-Yuantian.Tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-12-11 14:41 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151211144119.GM11252@tiger \
--to=shawnguo-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=Yuantian.Tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).