From: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Josh Triplett <josh-iaAMLnmF4UmaiuxdJuQwMA@public.gmane.org>,
Rashika Kheria
<rashika.kheria-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Greg Kroah-Hartman
<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>,
Alan Stern
<stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>,
Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>,
Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-usb <linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Subject: Re: [PATCH v2 3/3] ohci-platform: Add support for controllers with multiple reset lines
Date: Sun, 13 Dec 2015 19:10:03 -0600 [thread overview]
Message-ID: <20151214011003.GA3658@rob-hp-laptop> (raw)
In-Reply-To: <1449848520-27379-3-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
On Fri, Dec 11, 2015 at 04:42:00PM +0100, Hans de Goede wrote:
> At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple
> reset lines, the controller will not initialize while the reset for
> its companion is still asserted, which means we need to de-assert
> 2 resets for the controller to work.
>
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> ---
> Changes in v2:
> -New patch in v2 of this patch-set, to complement the identical patch for
> the ehci-platform code
> ---
> Documentation/devicetree/bindings/usb/usb-ohci.txt | 2 +-
> drivers/usb/host/ohci-platform.c | 49 +++++++++++++---------
> 2 files changed, 30 insertions(+), 21 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
> index 19233b7..9df4569 100644
> --- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
> +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
> @@ -14,7 +14,7 @@ Optional properties:
> - clocks : a list of phandle + clock specifier pairs
> - phys : phandle + phy specifier pair
> - phy-names : "usb"
> -- resets : phandle + reset specifier pair
> +- resets : a list of phandle + reset specifier pairs
>
> Example:
>
> diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
> index c2669f18..7d8bbc4 100644
> --- a/drivers/usb/host/ohci-platform.c
> +++ b/drivers/usb/host/ohci-platform.c
> @@ -33,11 +33,12 @@
>
> #define DRIVER_DESC "OHCI generic platform driver"
> #define OHCI_MAX_CLKS 3
> +#define OHCI_MAX_RESETS 2
> #define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv)
>
> struct ohci_platform_priv {
> struct clk *clks[OHCI_MAX_CLKS];
> - struct reset_control *rst;
> + struct reset_control *resets[OHCI_MAX_RESETS];
> struct phy **phys;
> int num_phys;
> };
> @@ -117,7 +118,7 @@ static int ohci_platform_probe(struct platform_device *dev)
> struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
> struct ohci_platform_priv *priv;
> struct ohci_hcd *ohci;
> - int err, irq, phy_num, clk = 0;
> + int err, irq, phy_num, clk = 0, rst = 0;
>
> if (usb_disabled())
> return -ENODEV;
> @@ -195,19 +196,23 @@ static int ohci_platform_probe(struct platform_device *dev)
> break;
> }
> }
> -
> - }
> -
> - priv->rst = devm_reset_control_get_optional(&dev->dev, NULL);
> - if (IS_ERR(priv->rst)) {
> - err = PTR_ERR(priv->rst);
> - if (err == -EPROBE_DEFER)
> - goto err_put_clks;
> - priv->rst = NULL;
> - } else {
> - err = reset_control_deassert(priv->rst);
> - if (err)
> - goto err_put_clks;
> + for (rst = 0; rst < OHCI_MAX_RESETS; rst++) {
> + priv->resets[rst] =
> + of_reset_control_get_by_index(dev->dev.of_node,
> + rst);
> + if (IS_ERR(priv->resets[rst])) {
> + err = PTR_ERR(priv->resets[rst]);
> + if (err == -EPROBE_DEFER)
> + goto err_reset;
> + priv->resets[rst] = NULL;
> + break;
> + }
> + err = reset_control_deassert_shared(priv->resets[rst]);
> + if (err) {
> + reset_control_put(priv->resets[rst]);
> + goto err_reset;
> + }
> + }
> }
>
> if (pdata->big_endian_desc)
> @@ -265,8 +270,10 @@ err_power:
> if (pdata->power_off)
> pdata->power_off(dev);
> err_reset:
> - if (priv->rst)
> - reset_control_assert(priv->rst);
> + while (--rst >= 0) {
> + reset_control_assert_shared(priv->resets[rst]);
> + reset_control_put(priv->resets[rst]);
> + }
> err_put_clks:
> while (--clk >= 0)
> clk_put(priv->clks[clk]);
> @@ -284,15 +291,17 @@ static int ohci_platform_remove(struct platform_device *dev)
> struct usb_hcd *hcd = platform_get_drvdata(dev);
> struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
> struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
> - int clk;
> + int clk, rst;
>
> usb_remove_hcd(hcd);
>
> if (pdata->power_off)
> pdata->power_off(dev);
>
> - if (priv->rst)
> - reset_control_assert(priv->rst);
> + for (rst = 0; rst < OHCI_MAX_RESETS && priv->resets[rst]; rst++) {
> + reset_control_assert_shared(priv->resets[rst]);
> + reset_control_put(priv->resets[rst]);
> + }
>
> for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++)
> clk_put(priv->clks[clk]);
> --
> 2.5.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-12-14 1:10 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-11 15:41 [PATCH v2 1/3] reset: Add shared reset_control_[de]assert variants Hans de Goede
[not found] ` <1449848520-27379-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-12-11 15:41 ` [PATCH v2 2/3] ehci-platform: Add support for controllers with multiple reset lines Hans de Goede
[not found] ` <1449848520-27379-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-12-11 17:13 ` Philipp Zabel
[not found] ` <1449853984.3419.52.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-12-11 18:28 ` Hans de Goede
[not found] ` <566B15B7.40703-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-12-14 20:11 ` Philipp Zabel
2015-12-14 1:09 ` Rob Herring
2015-12-11 15:42 ` [PATCH v2 3/3] ohci-platform: " Hans de Goede
[not found] ` <1449848520-27379-3-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-12-14 1:10 ` Rob Herring [this message]
2015-12-11 17:10 ` [PATCH v2 1/3] reset: Add shared reset_control_[de]assert variants Philipp Zabel
[not found] ` <1449853825.3419.50.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-12-11 18:21 ` Hans de Goede
[not found] ` <566B1424.2060700-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-12-14 9:12 ` Philipp Zabel
2015-12-14 9:36 ` Maxime Ripard
2015-12-14 9:50 ` Philipp Zabel
[not found] ` <1450086655.3407.23.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-12-16 10:29 ` Maxime Ripard
2015-12-16 11:21 ` Philipp Zabel
[not found] ` <1450264908.3421.36.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-12-18 11:08 ` Maxime Ripard
2015-12-19 10:55 ` Hans de Goede
[not found] ` <5675378F.5010904-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-01-04 20:39 ` Philipp Zabel
[not found] ` <1451939999.3884.89.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-01-04 21:16 ` Michal Suchanek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151214011003.GA3658@rob-hp-laptop \
--to=robh-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=josh-iaAMLnmF4UmaiuxdJuQwMA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=rashika.kheria-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=rogerq-l0cyMroinI0@public.gmane.org \
--cc=stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org \
--cc=swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=wens-jdAy2FN1RRM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox