Re: [PATCH 4/6] regulator: lp872x: Add enable GPIO pin support

[Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1532 bytes --]

On Wed, Dec 30, 2015 at 07:37:19PM +0100, Paul Kocialkowski wrote:
> Le mercredi 30 décembre 2015 à 16:33 +0000, Mark Brown a écrit :
> > On Wed, Dec 30, 2015 at 09:35:21AM +0100, Paul Kocialkowski wrote:

> > > In my opinion, it would be more elegant to adapt the core regulator
> > > framework to first enable the GPIO and then call the regulator enable
> > > ops callback instead of handling the GPIO in the driver.

> > Why would we want to actively manage both things at runtime?  It's more
> > work, what do we gain from it?

> Well, I figured that it would be best to disable the EN pin when we're
> not using any of the regulators, since that allows the chip to enter
> standby mode (and thus consume less power).

This doesn't sound like it's anything to do with the regulators, that's
a chip wide power management function which should be implemented via
runtime PM if there's any value in implementing it at all (if the device
is a primary PMIC normally this would be handled by the CPU core when it
enters low power state without any software).  It's not something we
should be considering on a per regulator basis since it's at the chip
level and on a per regulator basis it's not doing anything useful for
the reasons above.

> It also doesn't hurt regulators that only use a GPIO for enable.

It causes problems for any device with an optional GPIO,  it means that
we end up mantaining both GPIO and register which as I've said a couple
of times now defeats the point of having the GPIO.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]