From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH v3 2/2] pci, pci-thunder-pem: Add PCIe host driver for ThunderX processors. Date: Sat, 9 Jan 2016 16:53:21 -0600 Message-ID: <20160109225321.GA22053@rob-hp-laptop> References: <1452297553-19911-1-git-send-email-ddaney.cavm@gmail.com> <1452297553-19911-3-git-send-email-ddaney.cavm@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1452297553-19911-3-git-send-email-ddaney.cavm@gmail.com> Sender: linux-pci-owner@vger.kernel.org To: David Daney Cc: Bjorn Helgaas , linux-pci@vger.kernel.org, Will Deacon , linux-arm-kernel@lists.infradead.org, Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, David Daney List-Id: devicetree@vger.kernel.org On Fri, Jan 08, 2016 at 03:59:13PM -0800, David Daney wrote: > From: David Daney > > Some Cavium ThunderX processors require quirky access methods for the > config space of the PCIe bridge. Add a driver to provide these config > space accessor functions. The pci-host-common code is used to > configure the PCI machinery. > > Signed-off-by: David Daney > --- > .../devicetree/bindings/pci/pci-thunder-pem.txt | 43 ++++ Acked-by: Rob Herring > MAINTAINERS | 8 + > drivers/pci/host/Kconfig | 7 + > drivers/pci/host/Makefile | 1 + > drivers/pci/host/pci-thunder-pem.c | 283 +++++++++++++++++++++ > 5 files changed, 342 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/pci-thunder-pem.txt > create mode 100644 drivers/pci/host/pci-thunder-pem.c